Hydrodynamic analysis of a spiral disc extruder

The flow of polymer melts in a rotating disc extruder is analyzed with the development of a mathematical model for drag flow in a contoured rotating disc. The model assumes a fully melted material which exhibits Newtonian flow behavior under isothermal conditions. Flow is evaluated in successive sections of the flow path, and the drag flow component is calculated by assuming a zero pressure gradient by analogy to the analysis of single screw extruder performance. The final expression involves a computer-assisted numerical solution. Results of the drag flow model are presented for three different disc geometries. A mathematical model of negative flow, and a comparison of the results with experimental data will be presented in followup papers.     

Signal transduction pathways that regulate cell survival and cell death

Apoptosis or programmed cell death (PCD) is a physiological process critical for organ development, tissue homeostasis and elimination of defective or potentially dangerous cells in complex organisms. Apoptosis permits cell death without a concomitant inflammatory response in the surrounding tissues. The process of apoptosis depends on the reception of multiple extracellular and intracellular signals, integration and amplification of these signals by second messengers and finally, activation of the death effector proteases. Defects in control of apoptotic pathways may contribute to a variety of diseases including cancer, autoimmune and neurodegenerative conditions and AIDS. While many components of the regulatory network controlling apoptosis have been defined, the mechanisms of action and patterns of interaction of these factors remain controversial. This article summarizes some of the known aspects of signaling pathways involved in apoptosis.     

Differential kinetics and distribution of antibodies in serum and nasal and vaginal secretions after nasal and oral vaccination of humans

Although nasal vaccination has emerged as an interesting alternative to systemic or oral vaccination, knowledge is scarce about the immune responses after such immunization in humans. In the present study, we have compared the kinetics and organ distribution of the antibody responses after nasal and oral vaccination. We immunized female volunteers nasally or orally with cholera toxin B subunit (CTB) and determined the specific antibody levels in serum and nasal and vaginal secretions, as well as the number of circulating antibody-secreting cells, before immunization and 1, 2, 3, 6, and 26 weeks thereafter. Nasal vaccination induced 9-fold CTB-specific immunoglobulin A (IgA) and 56-fold specific IgG antibody increases in nasal secretions, whereas no significant IgA increase was seen after oral vaccination. Both oral and nasal vaccination resulted in 5- to 6-fold CTB-specific IgA and 20- to 30-fold specific IgG increases in vaginal secretions. Strong serum responses to CTB were also induced by both routes of vaccination. A notable difference between nasal and oral vaccination was that the nasal route elicited a specific antibody response with a later onset but of much longer duration than did the oral route. We conclude from this study that the nasal route is superior to the oral route for administering at least nonliving vaccines against infections in the upper respiratory tract, whereas either oral or nasal vaccination might be used for eliciting antibody responses in the female genital tract.     

Property stabilization in filled,drawn polyethylene

Mechanical properties of high density polyethylene (HDPE) extended to draw ratios in the 20–40 range have been determined and compared with corresponding properties of the polymers containing particulates including rutile, carbon black, iron oxide, and mica. Shrinkage of drawn structures was studied to temperatures near the fusion of the polymer host. The degree of interaction at polymer/additive interfaces was varied by surface coating certain of the solids with standard coupling agents. Solids were found to increase tensile moduli and to decrease shrinkage, particularly at higher exposure temperatures. The magnitude of changes due to the presence of solids was shown to depend on the apparent interaction at contacts between host and additive. In a dispersion–force matrix, like HDPE, benefits were optimized when the particulates were amphoteric or neutral, rather than having pronounced acid or base interaction potentials.     

Towards carbon-free flame spray synthesis of homogeneous oxide nanoparticles from aqueous solutions

Flame-assisted spray pyrolysis (FASP) is a versatile process for synthesis of nanoparticles from a broad choice of precursors and solvents. Water is an attractive solvent particularly for inexpensive inorganic precursors (e.g. metal nitrates) as it can effectively reduce the process cost. Furthermore when water usage is combined with a carbon-free fuel (e.g. H₂), nanoparticles can be made without forming CO₂. Here such a FASP process is explored for synthesis of Bi₂O₃ and other oxide nanoparticles from aqueous precursor solutions. The flame temperature was measured by FTIR emission–transmission spectroscopy while powders were characterized by X-ray diffraction and N₂ adsorption. At low FASP fuel gas (H₂ or C₂H₂) flow rates or process temperatures, product powders had a bimodal crystal size distribution. Its large and small modes were made by droplet- and gas-to-particle conversion, respectively. Homogeneous Bi₂O₃ and CeO₂ powders were obtained for sufficiently high flow rates of either C₂H₂ or H₂. Prolonged high temperature residence times promoted precursor evaporation from the spray droplets and yielded homogeneous nanostructured powders by gas-to-particle conversion. In contrast, FASP of aqueous solutions of aluminum nitrate yielded rather large particles by droplet-to-particle conversion at all fuel flows investigated.     

Growing a list

It is easy to find expert knowledge on the Internet on almost any topic, but obtaining a complete overview of a given topic is not always easy: information can be scattered across many sources and must be aggregated to be useful. We introduce a method for intelligently growing a list of relevant items, starting from a small seed of examples. Our algorithm takes advantage of the wisdom of the crowd, in the sense that there are many experts who post lists of things on the Internet. We use a collection of simple machine learning components to find these experts and aggregate their lists to produce a single complete and meaningful list. We use experiments with gold standards and open-ended experiments without gold standards to show that our method significantly outperforms the state of the art. Our method uses the ranking algorithm Bayesian Sets even when its underlying independence assumption is violated, and we provide a theoretical generalization bound to motivate its use.     

On the accuracy of SEC analyses of molecular weight distributions of polyethylenes

Molecular weights of National Bureau of Standards SRM 1476 polyethylene have been reported by six laboratories. The measured values are in remarkably good agreements and all show that M _w from SEC/LALLS analyses is significantly lower than the same average determined by LALLS on the whole polymer itself. This is shown to be due to the presence of high molecular weight species which become too diluted on passage through the SEC columns to be observed in the LALLS detector. The resulting error in M _w and higher averages may vary from slight to very serioius, depending on the molecular weight distribution of the particular polyethylene. A procedure is described to detect the presence of such high molecular weight species.