Feasibility study of large-scale mass customization 3D printing framework system with a case study on Nanjing Happy Valley East Gate

At present, the development and implementation of digital transformation are the keys to promoting high-quality industry development. The new digital fabrication method of robotic 3D printing is a research area being studied by many to tackle the issue of the declining productivity of traditional construction methods. Although many studies have been done, most of the current 3D printing projects are facing limitations in terms of scale. In order to bridge the gap, this article proposed a mass customization 3D printing framework system for large-scale projects. This article discusses how mass customization is made possible through the joint operation of the FUROBOT software and 3D printing hardware. By taking the east gate of Nanjing Happy Valley Plaza as a case study, the article demonstrates and studies the feasibility of the large-scale mass customization 3D printing framework system.     

Separation of hematite from banded hematite jasper (BHJ) by magnetic coating

The separation of iron oxide from banded hematite jasper(BHJ) assaying 47.8% Fe, 25.6% Si O2 and 2.30%Al2O3 using selective magnetic coating was studied. Characterization studies of the low grade ore indicate that besides hematite and goethite,jasper, a microcrystalline form of quartzite, is the major impurity associated with this ore. Beneficiation by conventional magnetic separation technique could yield a magnetic concentrate containing 60.8% Fe with 51% Fe recovery. In order to enhance the recovery of the iron oxide minerals, fine magnetite, colloidal magnetite and oleate colloidal magnetite were used as the coating material. When subjected to magnetic separation, the coated ore produces an iron concentrate containing 60.2% Fe with an enhanced recovery of56%. The AFM studies indicate that the coagulation of hematite particles with the oleate colloidal magnetite facilitates the higher recovery of iron particles from the low grade BHJ iron ore under appropriate conditions.     

Strain rate dependency and fragmentation pattern of expanding warheads

For the characterization of the behaviors of a metal material in events like expanding warheads, it is necessary to know its strength and ductility at high strain rates, around 104e105/s. The flyer plate impact testing produces the uniform stress and strain rates but the testing is expensive. The Taylor test is relatively inexpensive but produces non-uniform stress and strain fields, and the results are not so easily inferred for material modeling. In the split-Hopkinson bar(SHB), which may be used in compression, tension and torsion testing, the strain rates never exceeds 103/s. In the present work, we use the expanding ring test where the strain rate is 104e105/s. A streak camera is used to examine the expanding ring velocity, and a water tank is used to collect the fragments. The experimental results are compared with the numerical simulations using the hydrocodes AUTODYN, IMPETUS Afea and a regularized smooth particle(RSPH) software. The number of fragments increases with the increase in the expansion velocity of the rings. The number of fragments is similar to the experimental results. The RSPH software shows much the same results as the AUTODYN where the Lagrangian solver is used for the ring. The IMPETUS Afea solver shows a somewhat different fragmentation characteristic due to the node splitting algorithm that induces pronounced tensile splitting.     

工业废水的生化处理工艺

1　引言多年来 ,欧盟与各国政府都不断地加强有关污水处理的法规 ,法规规定产生污水的企业必须在排放污水前加以处理。然而 ,在许多场合 ,由于至今尚无令人满意的方法来彻底净化污水 ,而且只要这些生产企业正在认真地寻找解决问题的方法 ,这些规定也不是一概而论的。因此 ,在实施法规的过程中就导致了某种程度的宽松度。这些情况将会结束 ,在不久的将来 ,这些法规将会得到强有力的执行。现在大多数公司的环境问题很严重 ,当然污水处理也确实有其商业上的原因。最主要的是这些公司除非找到一个可行的处理污水的方法 ,否则不允许他们继续生产…     

Characterisation of orientation noise for EBSP technique

ＩｎｔｒｏｄｕｃｔｉｏｎＥｌｅｃｔｒｏｎｂａｃｋ ｓｃａｔｔｅｒｅｄｐａｔｔｅｒｎ (ＥＢＳＰ)ａｎａｌｙｓｉｓｉｎｔｈｅｓｃａｎｎｉｎｇｅｌｅｃｔｒｏｎｍｉｃｒｏｓｃｏｐｅａｓａｔｏｏｌｆｏｒｉｎｖｅｓｔｉｇａｔｉｎｇｍｉｃｒｏｓｔｒｕｃｔｕｒｅｈａｓｂｅｅｎｗｅｌｌｅｓｔａｂｌｉｓｈｅｄ .Ｔｈｉｓｔｅｃｈｎｉｑｕｅｈａｓｍａｎｙａｄｖａｎｔａｇｅｓｏｖｅｒｔｒａｎｓｍｉｓｓｉｏｎｅｌｅｃｔｒｏｎｍｉｃｒｏｓｃｏｐｙ .Ａｄｒａｗｂａｃｋｏｆｔｈｉｓｔｅｃｈｎｉｑｕｅｉｓｔｈｅａｎｇｕｌａｒｒｅｓｏ…     

可全部取回的小井眼伽马随钻测量(MWD)系统可将水平钻井的风险减至最小

一种特别适用于水平井实时大地转向的小井眼伽马定向测量MWD工具已研制成功。这是第一个能利用钢丝全部取回并进行更换的测量系统。它可以将卡钻和“井内花费”的风险减至最小。此外,它还可以将因发生故障而更换工具需要进行的起下钻次数减至最少,从而降低钻井成本。 该系统可以下入内径小到2.19英寸(56mm)和钻铤内,且已经下入过外径为3(1/2)英寸(89mm)的钻铤。它还下入过钻井作业用的盘管内。 本文将介绍井下系统及其校准方法,并与普通绳索测井进行比较。 文中还介绍了几个现场水平井应用的实例,着重说明如何利用伽马射线使水平泄油井“大地转向”而保持在油层内,以及如何在钻井期向跟踪地层倾角的方向。这样做可以减小水平钻井的风险,增大收回投资的可能性。     

高性能纺织品整理方法及其应用

1　加工方法1 1　涂层纺织品的涂层可在多种设备上完成 ,其中最常用的是使用刮刀、辊筒、凹辊、粘辊和背辊。用于生产给定的最终产品时 ,每一种设备都有其优缺点 ,所以在选择时 ,我们应该对以下几点进行认真考虑 :纺织品的性质 ;涂层剂的流变性及其他性质 ;涂层剂是泡沫型的还是浆料型的 ;涂层剂在常温下还是在热熔条件下使用。另外 ,非常值得我们考虑的还有涂层剂的用量 ,以及涂层剂是用在织物的表面 ,还是尽量充满到织物结构内。所有这些都要由最终产品的性质及所要求具有的特种功能来确定。当前 ,除了涂层剂及织物的普通性能外 ,人们还…     

用仿真工具优化车辆动力系统(一)

在本文的第一部分，介绍了一种理想的车辆动力系统的计算机辅助开发过程。它显示了现代仿真技术在产品持续发展过程中的作用，该技术采用硬件回路作非在线的仿真，并通过现代化的试验手段对车辆进行匹配。特别重要的是提供了将电控变速器和发动机控制单元综合的可能性。接着是在线仿真在诸如发动机和变速器模式方面的应用和发展，它是上述开发过程的基础。根据上述的方法论，本文论述了仿真技术已取得的成绩和将来的应用可能性。