Bayesian estimation based on vague lifetime data

In Classical Bayesian approach, estimation of lifetime data usually is dealing with precise information. However, in real world, some informations about an underlying system might be imprecise and represented in the form of vague quantities. In these situations, we need to generalize classical methods to vague environment for studying and analyzing the systems of interest. In this paper, we propose the Bayesian estimation of failure rate and mean time to failure based on vague set theory in the case of complete and censored data sets. To employ the Bayesian approach, model parameters are assumed to be vague random variables with vague prior distributions. This approach will be used to induce the vague Bayes estimate of failure rate and mean time to failure by introducing and applying a theorem called “Resolution Identity” for vague sets. In order to evaluate the membership degrees of vague Bayesian estimate for these quantities, a computational procedure is investigated. In the proposed method, the original problem is transformed into a nonlinear programming problem which is then divided into eight subproblems to simplifying computations.     

Robust Unknown Input Observer Design for Linear Uncertain Time Delay Systems with Application to Fault Detection

In this paper, a novel approach is proposed to design a robust fault detection observer for uncertain linear time delay systems. The system is composed of both norm‐bounded uncertainties and exogenous signals (noise, disturbance, and fault) which are considered to be unknown. The main contribution of this paper is to present unknown input observer (UIO)‐based fault detection system which shows the maximum sensitivity to fault signals and the minimum sensitivity to other signals. Since the system contains uncertainty terms, an H_∞ model‐matching approach is used in design procedure. The reference residual signal generator system is designed so that the fault signal has maximum sensitivity while the exogenous signals have minimum sensitivity on the residual signal. Then, the fault detection system is designed by minimizing the estimation error between the reference residual signal and the UIO residual signal in the sense of H_∞ norm. A sufficient condition for the existence of such a filter is exploited in terms of certain linear matrix inequalities (LMIs). Application of the proposed method in a numerical example and an engineering process are simulated to demonstrate the effectiveness of the proposed algorithm. Simulation results show the validity of the proposed approach to detect the occurrence of faults in the presence of modeling errors, disturbances, and noise.     

Sonification and interaction design in computer games for visually impaired individuals

Multimedia Tools and Applications - Video games are changing how we interact and communicate with each other. They can provide an authentic and collaborative platform for building new communities...     

Process Optimization,Physical Properties,and Environmental Stability of an α-Tocopherol Nanocapsule Preparation Using Complex Coacervation Method and Full Factorial Design

α-Tocopherol (α-Toc) has valuable biological activity, but its activity is limited when exposed to environmental factors. Nanocapsules can be used to overcome this problem. Using nanocapsules in the range of 100–200 nm is more beneficial. A 2⁴ full factorial design was carried out to optimize the size of nanocapsules using the complex coacervation method. The four factors were the amount of the wall material, the ratio of core material to wall material, the pH of the solution, and the speed of the homogenizer. The smallest nanocapsules (176 nm) were obtained at a wall content (gelatine and pectin) of 0.8 mg, a percentage of core material (α-Toc) to wall material of 20%, a pH = 4.5, and a homogenizer speed of 12,000 rpm. The encapsulation efficiency was 90.6 ± 1.1%, and the encapsulation yield was 83.4 ± 1.6%. Assessment of the stability of α-Toc after 1 month showed that encapsulation could improve its stability in the presence of three influential factors: humidity, light, and temperature.     

Oxidative stability of olive oil during the thermal process: Effect of Pistacia khinjuk fruit oil

The oxidative stability of refined olive oil with incorporated Pistacia khinjuk fruit oil (PKFO; 0.5%, 1%, 2%, 5%, and 10%) during thermal processing at 170ºC for 8 h was evaluated. The conjugated diene values, carbonyl values, acid values, oil/oxidative stability indices, and total tocopherol content were measured during thermal processing. Olive oil containing 0.5% PKFO was identified as the most oxidative stable oil followed by oils containing 100 ppm TBHQ and 1, 5, 10, and 2% PKFO. No significant difference between samples of olive oil containing 100 ppm TBHQ and 1% PKFO was observed. Thus, it was concluded that PKFO at levels lower than 1% could provide stronger antioxidation activity in comparison with TBHQ (the strongest syntactic antioxidant used in the food industry). Moreover, reduction in tocopherol compounds during thermal processing was higher in olive oil containing TBHQ as compared to those in pure olive oil.     

The Inhibition Performance of trans-Cinnamaldehyde as a Green Compound for Mild Steel in Acidic 1 M HCl Medium: Correlation between Experimental and Theoretical Studies

Protection of Metals and Physical Chemistry of Surfaces - Corrosion inhibition propriety of (2E)-3-phenylprop-2-enal, known as trans-cinnamaldehyde (TCA) for mild steel in 1 M HCl medium was...     

Perpendicular Weak Permanent Magnetic Field Effect on the Electrodeposited Nanostructured ZnO Film and its Kinetic Corrosion Behavior

Protection of Metals and Physical Chemistry of Surfaces - In this work the effect of the permanent weak magnetic field on the electrodeposited ZnO nanostructured film on the ITO substrate...     

Removal of the persistent pollutant chlorobenzene by adsorption onto activated montmorillonite

The potential of activated bentonite was assessed for adsorption of chlorobenzene from aqueous solution. The bentonite used was treated by chemical and thermal activation over 100–500 °C. The thermal activation increased the adsorption capacity more strongly than chemical activation which consists to acid and hydrogen peroxide treatment. The removal is dominated by adsorption at low initial concentrations and low temperatures and favourable in acidic media. The dependence of the adsorption on pH appears to be related to the solubility of chlorobenzene. Thermodynamic parameters such as ΔH°, ΔS°, ΔG° and Ea have been calculated. The adsorption process is spontaneous and exothermic in nature. The Freundlich isotherm described the adsorption data over the concentration range (20–270 °C).