Separate assessment of porosity and uncombined carbon in cemented carbides

Porosity and uncombined carbon in cemented carbides are traditionally assessed by comparison to standardized microstructure charts, such as those in ISO 4505-1978. To improve the accuracy in the characterization a fully automatic image analysis procedure has been developed. The analysis is performed using light optical microscopy on unetched polished specimens. The implemented algorithm separates uncombined carbon, C-defects, from pores, A- and B-defects. Pores are approximately distributed in a random way in the structure. Uncombined carbon is on the other hand precipitated into clusters of carbon particles. This difference is together with defect size used as a base for the separation. Small defects situated close together are classified as C-defects, small isolated defects as A-pores and large defects as B-pores. Pores are found to be more round than the somewhat elongated C-defects. The difference in shape is significant and can also be used as a separation criterion.

Image analysis is used to quantitatively characterise the ISO 4505-1978 standard charts with respect to volume fraction, number density and size distribution of defects. The results are compared to measured distributions for true microstructures.     

Participatory ergonomics in design processes: the role of boundary objects

The aim of this paper is to introduce the concept of boundary objects in order to better understand the role of objects in participatory ergonomics (PE) design processes. The research question is: What characterizes boundary objects in PE processes? Based on two case studies, we identify eight characteristics of boundary objects and their use, which make them particularly useful in PE design processes. These characteristics go beyond the object itself and extend into the context of their use. We argue that the selection of boundary objects in PE processes is of great importance, since different objects enable workers’ participation and collaborative design in different ways. The framework developed may serve to provide criteria to guide practitioners and intervention researchers in the selection of objects to facilitate a PE process. The paper concludes with a list of recommendations for ergonomic practitioners that are based on the framework.     

Internal locus of control and choice in health service shift workers

This study examined the relationship between shift work-specific locus of control (SH-LOC), active choice of work schedule and health outcomes, personal initiatives and coping behaviours in 1611 Danish Health Service shift workers. The 20-item SH-LOC scale was administered as part of a battery of measures. Multivariate analysis of covariance (controlling for age, workplace experience and weekly work hours) tested for differential responses to shift working and coping strategies. Interactive effects of internality and type of work rota were examined. Higher internality was linked to better tolerance to shift work. This did not appear to be a result of greater personal action in higher internals. The importance of control as a potential moderating factor to shift work exposure and the possible use of this measure in the process of shift worker monitoring is highlighted.     

Marine n-3 fatty acids: Basic features and background

There is some evidence from epidemiology that intake of n-3 polyunsaturated fatty acids (PUFA) from seafood may protect against coronary artery disease (CAD). This hypothesis is further supported from animal data showing a beneficial effect of n-3 PUFA on thrombosis and atherosclerosis in animals fed fish oils in most, but not all, studies. There are several mechanisms by which an increased intake of marine n-3 PUFA may protect against CAD; the most universal finding is a reduction of plasma triglycerides. It is puzzling, however, that a very low amount of n-3 PUFA, with no known beneficial biochemical effects, seems to be cardioprotective. It has therefore been of paramount interest to perform clinical trials. Such evidence and trials are discussed in later chapters, and the results have been very encouraging.     

Motion planning and control of robotic manipulators on seaborne platforms

Robots on ships have to endure large inertial forces due to the non-inertial motion of the ship. The ship motion affects both the motion planning and control of the manipulator, and accurate predictions can improve performance substantially. It is thus important to investigate to what extent it is possible to predict the future motion of a ship. Based on these predictions, this paper presents a new approach to motion planning and control of such manipulators. It is shown that the effects of the non-inertial forces can be eliminated—in fact, the robot can even leverage the inertial forces to improve performance compared to robots on a fixed base. In particular it is shown that by including the inertial forces in the motion planning the wear and tear on the robot due to these forces can be reduced substantially. To perform realistic experiments a 9-DoF robot is used. The first five joints are used to generate the real ship motion, and the last four joints are used for motion planning. The dynamic coupling between the first five and the last four joints is thus exactly the same as the dynamic coupling between a ship and a manipulator, which allows for very realistic experiments.     

Amlodipine dynamic effects and myocardial pharmacokinetics in the isolated and perfused guinea-pig heart

Myocardial dynamic effects and pharmacokinetics of amlodipine were studied in the isolated retrogradely perfused and spontaneously beating guinea-pig heart. Pharmacokinetic analysis of drug accumulation showed one-compartment characteristics with an half-life of 76 min. Whereas disposition exhibited two-compartment characteristics with phasic half-lives of 25 and 174 min., respectively. Myocardial drug accumulation was increased by 600 times at steady-state compared to the perfusion liquid. Dynamic effect parameters were studied during increasing amlodipine concentrations from 0.16 to 220 nM. Dynamic steady-states developed within 20 min. Coronary flow-rate increased with an Emax of 119% and an EC50 of 1.2 x 10(-8) M. Amlodipine produced inhibitory effects on contraction amplitude and velocities of contraction and relaxation. Observed Emax-values and curve-fitted EC50-values were: 97, 97 and 94% and 1.10(-8), 7.7 x 10(-9) and 2.1 x 10(-8) M, respectively. Heart frequency was not changed. Oxygen consumption increased markedly to a maximum of 44% at 3 x 10(-8) M amlodipine and then decreased to nearly initial values. The frequency-corrected QT-interval decreased to a maximal extent of 20% at the three highest concentrations. Myocardial efficiency expressed as the ratio of contraction velocity times frequency to oxygen consumption exhibited a progressive decline to about 2% of initial values. The PQ-interval was not changed and the QRS-interval showed only a small but significant decrease at the highest amlodipine concentration. No arrythmogenic effects were observed. The study demonstrated a very slow accumulation and disposition of amlodipine in the guinea-pig heart with a steady-state myocardial drug concentrating accumulation of 600 times. Marked increase in coronary flow-rate and oxygen consumption accompanied by a progressive negative inotropic effect were observed.     

Analysis of ventilation parameters before and after fiber optic bronchoscopy in patients with atopic bronchial asthma and chronic obstructive pulmonary diseases

Bronchial asthma and chronic bronchitis in a stable period of the disease could be an indication for diagnostic bronchofiberoscopy. The aim of the authors of this article is to assess whether bronchoscopy may be safely used either as diagnostic or therapeutic procedure. 21 patients (age 33-46), 13 with atopic bronchial asthma and 8 with COPD took part in this study. The measurements were carried out one day before and 3 hours after the bronchoscopy. The following parameters: Forced Vital Capacity (FVC), Forced Expiratory Volume (FEV1), Forced Expiratory Flow (FEF25, FEF50, FEF75) and Resistance of Airways (R aw) were taken into consideration. It was shown that bronchofiberoscopy could be performed safely in these patients and did not lead to woersing ventilation parameters. Bronchospasm was not observed during the study. Moreover the increase in FEF50, FEF75 and R aw were observed. This significant decrease of amount of bronchial discharge could serve as an explanation of this phenomenon.     

Inhibition of Bacillus cereus spore outgrowth and multiplication by chitosan

Bacillus cereus is an endospore-forming bacterium able to cause food-associated illness. Different treatment processes are used in the food industry to reduce the number of spores and thereby the potential of foodborne disease. Chitosan is a polysaccharide with well-documented antibacterial activity towards vegetative cells. The activity against bacterial spores, spore germination and subsequent outgrowth and growth (the latter two events hereafter denoted (out)growth), however, is poorly documented. By using six different chitosans with defined macromolecular properties, we evaluated the effect of chitosan on Bacillus cereus spore germination and (out)growth using optical density assays and a dipicolinic acid release assay. (Out)growth was inhibited by chitosan, but germination was not. The action of chitosan was found to be concentration-dependent and also closely related to weight average molecular weight (M_w) and fraction of acetylation (F_A) of the biopolymer. Chitosans of low acetylation (F_A = 0.01 or 0.16) inhibited (out)growth more effectively than higher acetylated chitosans (F_A = 0.48). For the F_A = 0.16 chitosans with medium (56.8 kDa) and higher M_w (98.3 kDa), a better (out)growth inhibition was observed compared to low M_w (10.6 kDa) chitosan. The same trend was not evident with chitosans of 0.48 acetylation, where the difference in activity between the low (19.6 kDa) and high M_w (163.0 kDa) chitosans was only minor. In a spore test concentration corresponding to 10²-10³ CFU/ml (spore numbers relevant to food), less chitosan was needed to suppress (out)growth compared to higher spore numbers (equivalent to 10⁸ CFU/ml), as expected. No major differences in chitosan susceptibility between three different strains of B. cereus were detected. Our results contribute to a better understanding of chitosan activity towards bacterial spore germination and (out)growth.