Study of photosensitive mixtures of TMAE and helium, hydrocarbon or CF4-based carrier gases

Among the photocathodes used for particle identification based on the Cherenkov Ring Imaging technique, the TMAE molecule is still the best in terms of quantum efficiency. Despite the fact that TMAE gaseous photocathodes have already been used in a number of large experiments, one still seeks answers to many detailed questions. We present a systematic study of gaseous photocathodes based on TMAE mixed with helium, hydrocarbon and CF₄-based gases at normal pressure. The study includes a measurement of the electron drift velocity, gas quenching properties, single electron pulse height spectra and anode wire aging. The paper makes recommendations for carrier gas mixtures to obtain the best quenching, and suggests how to manage TMAE wire aging. This study was motivated by a specific particle identification detector proposal, the Fast Drift CRID proposed for the B-factory at SLAC.     

Development of the Multicultural Counseling Inventory: A self-report measure of multicultural competencies.

Presents the Multicultural Counseling Inventory (MCI), a self-report instrument that measures multicultural counseling competencies. Study 1 comprised 604 psychology students, psychologists, and counselors in a midwestern state. In Study 2, respondents were a national random sample of 320 university counselors. Instrument analysis included exploratory principal-axis factor analysis with oblique rotation, assessment of factor congruence between the factor structures of the 2 samples, LISREL confirmatory factor analysis to test the relative goodness of fit of 6 competing factor models of the MCI, and tests of internal consistency reliabilities. Results indicate that the MCI has 4 factors: Multicultural Counseling Skills, Multicultural Awareness, Multicultural Counseling Relationship, and Multicultural Counseling Knowledge. A higher order, more general multicultural counseling factor is also discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Preparation and properties of ABA block polymers of styrene and butadiene or isoprene made with sec-C4H9Li·2(C2H5)2O

ABA-type “tapered” block polymers were prepared from styrene (monomer A) and butadiene or isoprene, using an initiator of sec-butyllithium complexed with two molecules of ethyl ether. The stress–strain curves of polymers containing about 20–50% styrene show the usual resemblance to curves of crosslinked elastomers. The SBS polymers had higher tensile strengths than the SIS polymers. They also had slightly higher tensile strengths than comparable SBS polymers made with sec-butyllithium. The SIS polymers, however, had generally lower tensile strengths than those made with sec-butyllithium. This is probably caused by higher styrene content of the isoprene block, brought about by increased randomization of the styrene–isoprene copolymerization due to the presence of the ether. The A and B blocks become more compatible, producing loss of strength in the polymer. Infrared analyses of polydienes made with the sec-C₄H₉Li·2(C₂H₅)₂O initiator showed a 6% to 8% increase in 1,2-content (for polybutadiene) or 3,4-content (for polyisoprene), compared to polymers made with sec-butyllithium. The polymer microstructures still have high (>80%) total 1,4-content, however. Thus, this amount of ether can be tolerated in the polymerization system without great loss of rubbery properties or block structure in the resultant polymers.     

Characterisation of the neutral oil from a low-temperature coal tar

Tar resulting from fluidised-bed, low-temperature carbonisation of coal was treated to yield a neutral oil from which a series of six other samples was extracted. These were examined by proton magnetic resonance (p.m.r.) spectroscopy, low-ionising-voltage (11 eV) mass spectroscopy (m.s.), gel chromatography followed by fluorescent indicator analysis, and cryoscopy. Aliphatic fractions separated chromatographically were also examined by infra-red spectroscopy. Distributions of hydrogen between chemical types were found for the several fractions from 60 MHz p.m.r. spectra and presented in terms of average structural parameters. M.s. analysis indicated negligible cracking of paraffin components, and the average molecular weight of 197 agreed well with cryoscopic determinations. For the carbon ratio, f_a, between aromatic and total, agreement between m.s. and p.m.r. depends on the p.m.r. structural analysis scheme adopted. P.m.r. and m.s. structural analyses of the aromatics emphasise the predominance of di- and tri-nuclears, with about 40% of available sites substituted, and the importance of acenes in lowtemperature carbonisation material. Gas and gel chromatography showed urea-adductable paraffins to be largely straight-chain C₁₀-C₂₆, much as for tars from carbonisation at higher temperature.     

Transduction properties of tracheal stretch receptors

1. Using single fibre vagal afferent recording, we have studied the behavior of slowly adapting stretch receptors located in an isolated, in situ, segment of the trachea in dogs. Responses to positive and negative steady and oscillating transmural pressures were investigated. 2. Seventy-eight per cent of the receptors studied were tonically active at resting tracheal volume. Ninety per cent showed a more pronounced response to positive than to negative transmural pressures. 3. During pressure oscillations the majority of the receptors had a higher discharge frequency at any given pressure during the ascending phase of the pressure wave than at the same pressure under static conditions. During most of the ensuing descent of pressure toward zero the discharge frequency led transmural pressure. 4. With increasing frequency of oscillation the differences from the static responses increased (dP/dt sensitivity), especially during the ascending limb of the pressure oscillation (rectifying behavior). 5. In a small number of receptors, discharge frequency lagged behind transmural pressure or was in phase with it ("no loop" pattern). 6. In three cases the same receptor exhibited dP/dt sensitivity during positive pressure oscillations, whereas discharge frequency lagged behind pressure during negative pressure oscillations. This indicates that the lack of dP/dt sensitivity exhibited under negative pressure conditions does not represent an intrinsic property of these receptors, but reflects some aspect of their mechanical arrangement within the airway wall. 7. THESE PATTERNS OF RESPONSE ARE DISCUSSed in terms of intrinsic and extrinsic characteristics of the receptors. 8. The physiological implications of stretch receptor behaviour are also considered.     

A multichannel neural probe for selective chemical delivery at thecellular level

A bulk-micromachined multichannel silicon probe capable of selectively delivering chemicals at the cellular level as well as electrically recording from and stimulating neurons in vivo has been developed. The process buries multiple flow channels in the probe substrate, resulting in a hollow-core device, Microchannel formation requires only one mask in addition to those normally used for probe fabrication and is compatible with on-chip signal-processing circuitry. Flow in these microchannels has been studied theoretically and experimentally. For an effective channel diameter of 10 μm, a channel length of 4 mm, and water as the injected fluid, the flow velocity at 11 torr is about 1.3 mm/s, delivering 100 pl in 1 s. Intermixing of chemicals, with the tissue fluid due to natural diffusion through the outlet orifice becomes significant for dwell times in excess of about 30 min, and a shutter is proposed for chronic use. The probe has been used for acute monitoring of the neural responses to various chemical stimuli in guinea pig superior and inferior colliculus     

Quantifying motion in video recordings of neonatal seizures by robust motion trackers based on block motion models

This paper introduces a methodology for the development of robust motion trackers for video based on block motion models. According to this methodology, the motion of a site between two successive frames is estimated by minimizing an error function defined in terms of the intensities at these frames. The proposed methodology is used to develop robust motion trackers that rely on fractional block motion models. The motion trackers developed in this paper are utilized to extract motor activity signals from video recordings of neonatal seizures. The experimental results reveal that the proposed motion trackers are more accurate and reliable than existing motion tracking methods relying on pure translation and affine block motion models.     

Band-tunable and multiplexed integrated circuits for simultaneous recording and stimulation with microelectrode arrays

Two thin-film microelectrode arrays with integrated circuitry have been developed for extracellular neural recording in behaving animals. An eight-site probe for simultaneous neural recording and stimulation has been designed that includes on-chip amplifiers that can be individually bypassed, allowing direct access to the iridium sites for electrical stimulation. The on-probe amplifiers have a gain of 38.9 dB, an upper-cutoff frequency of 9.9 kHz, and an input-referred noise of 9.2 microV rms integrated from 100 Hz to 10 kHz. The low-frequency cutoff of the amplifier is tunable to allow the recording of field potentials and minimize stimulus artifact. The amplifier consumes 68 microW from +/- 1.5 V supplies and occupies 0.177 mm2 in 3 microm features. In vivo recordings have shown that the preamplifiers can record single-unit activity 1 ms after the onset of stimulation on sites as close as 20 microm to the stimulating electrode. A second neural recording array has been developed which multiplexes 32 neural signals onto four output data leads. Providing gain on this array eliminates the need for bulky headmounted circuitry and reduces motion artifacts. The time-division multiplexing circuitry has crosstalk between consecutive channels of less than 6% at a sample rate of 20 kHz per channel. Amplified, time-division-multiplexed multichannel neural recording allows the large-scale recording of neuronal activity in freely behaving small animals with minimum number of interconnect leads.     

An ultraminiature CMOS pressure sensor for a multiplexedcardiovascular catheter

A multiplexed ultraminiature pressure sensor designed for use in a cardiovascular catheter is described. The sensor operates from only two loads, which are shared by two sensors per catheter. The sensing chip is 350 μm wide by 1.4 mm long by 100 μm thick. CMOS readout circuitry at the sensing site converts applied pressure to a frequency variation in the supply current, which is detected at the end of the catheter by a microprocessor-controlled interface. The nominal pressure sensitivity is 2 kHz/fF about a zero-pressure output frequency of 2.7 MHz. This on-site circuitry contains two reference capacitors which allow external compensation for nonlinearity and temperature sensitivity and has an idle-state power dissipation of less than 50 μW. With the transducer sealed at ambient pressure, the device can resolve pressure variations of about 3 mmHg, while vacuum-sealed devices do considerably better and should permit <2 mmHg resolution in practical systems     

Mesa-isolated GaAs Schottky-barrier photodiodes

The design, fabrication and characterisation of GaAs Schottky-barrier photodiodes with evaporated, free-standing-metal airbridges is reported. The photodiodes were fabricated using all dry-etching techniques. Anisotropic chemically assisted ion beam etching was used to etch vertical sidewall mesas, and isotropic reactive ion etching was used to etch a lateral tunnel. A free-standing-metal airbridge created by the lateral tunnel etch results in isolation of the active area at the same time providing free-standing-metal interconnection to the contact pad.<>