卡e通--SIM卡备份利器

一般来说，人们习惯把电话号码储存在SIM卡中，这样带来的好处就是换了手机后都能随时调用，所以SIM卡上的电话号码是备份的头等大事，而一般要读取SIM卡上的资料都需要借助手机与电脑连接，如果你使用的手机没有相关的连接软件或工具，那么，想要备份就是一件很困难的事情了，而这里要给大家介绍的“卡e通”就是专门对付这种情况的。     

应用斯通利波反射与高分辨率慢度测量方法探测地层中的薄气层

探测地层中的气层是地层评价的一项重要课题，通常，气体存在于小的矿穴或薄层/由薄层组成的地层中，由于常规测井的纵向分辨率通常较低，致使它们经常被忽略，本文介绍的是使用斯通利波反射和高分辨率慢度两种测量方法对薄气层进行声学测定。与围岩地层相比，一个饱和气地层具有明显不同的流体迁移率和可压缩性，在对这种地层进行声学测井过程中，流体迁移率/可压缩性的巨大变化使我们可以测量到斯通利波反射，并且它对于地层厚度不是很敏感，因此，斯通利波反射能够用于对薄气层的探测。但是，慢度测量却是受气层厚度的探测。近年来，随着慢度分析方法的不断发展，小于0.5英尺的薄气层也能被探测到了。组合使用斯通利波和慢度测量法能够保证结果的准确度。     

用仿真工具优化车辆动力系统(一)

在本文的第一部分，介绍了一种理想的车辆动力系统的计算机辅助开发过程。它显示了现代仿真技术在产品持续发展过程中的作用，该技术采用硬件回路作非在线的仿真，并通过现代化的试验手段对车辆进行匹配。特别重要的是提供了将电控变速器和发动机控制单元综合的可能性。接着是在线仿真在诸如发动机和变速器模式方面的应用和发展，它是上述开发过程的基础。根据上述的方法论，本文论述了仿真技术已取得的成绩和将来的应用可能性。     

CHARACTERIZATION OF Si_(1-x-y)Ge_xC_y FILMS GROWN BY ION IMPLANTATION AND SUBSEQUENT SOLID PHASE EPITAXY

Si1-x-yGexCy ternary alloy films were grown on monocrystalline silicon substrates by C ion implantation and subsequent solid phase epitaxy (SPE). Two-step anneal-ing technique was employed in the SPE. The structure and electrical properties of the alloy films were determined using Fourier transform infrared spectroscopy and van der Pauw Hall measurements, respectively. With the optimization of two-step anneal-ing technique for the implanted Si1-x-yGexCy layers, a certain amount of C atoms occupied substitutional sites and no SiC was formed.     

Thermal Radiative Properties of Xonotlite Insulation Material

Introduction Xonotlite-type calcium silicate (6CaO?6SiO2?H2O) is synthesized porous insulation material by hydrothermal processing with quartz powder and limestone as the raw material (with CaO/ SiO2≈1:1). Compared with fire- retardant fibre, xonotlite has more excellent insulating performance, such as low thermal conductivity, environment friendly, high intension, and wide applying temperature range, which has been emphasized in recent years by many scholars and widely used in many indu…     

液晶分子附着能和盒间隙对响应时间的影响

通过理论分析和实验研究液晶分子附着能和液晶盒间隙对响应时间(τ0)的影响。用液晶盒有效间隙法和表面动力学方程法两种方法推出分析公式,由这两种方法推出的结果是一致的。实验数据与简化方程τ0-dx基本拟合(其中d是液晶盒的间隙,x是指数)。在两种极端的(极大或极小)附着能极限下,指数x分别接近2和1。这个结论有助于优化液晶显示器件的应用。     

液晶光阀用ZnSSe薄膜的光电特性研究

用分子束外延法(MBE),在铟锡氧化物(ITO)导电玻璃衬底上生长了ZnSSe薄膜,详细研究了薄膜的光电特性.通过控制反应时的生长参数,制备出了符合紫外液晶光阀设计要求的光导层薄膜.室温下,该薄膜光谱响应截止边的响应度为0.01A/W,紫外/可见光响应对比度大于103.薄膜的暗电阻率随薄膜晶粒增大而减小,在衬底温度为2900C时,所获得的ZnSSe薄膜具有4.3×1011Ω@cm的暗电阻率.频率从40Hz到4000Hz的交流特性测试,也证实该薄膜符合器件紫外成像的工作要求.     

Localized relaxation theory of circuits and its applications in electro-thermal analyses

In the high-performance IC design with increasing design complexity,it is a very important design content to efficiently analyze IC parameters.Thus,the electro-thermal (ET) analyses including power/ground (P/G) analysis and thermal analysis are hot topics in today’s IC research.Since ET analysis equation has a sparse,positive definite and strictly diagonally dominant coefficient-matrix,we prove that the ET analysis has the advantage of locality.Owing to this advantage,localized relaxation method is formally proposed,which has the same accuracy as the global relaxation done with the constraint of the same truncation error limitation.Based on the localized relaxation theory,an efficient and practical localized successive over-relaxation algorithm (LSOR2) is introduced and applied to solve the following three ET analysis problems.(1) Single-node statistical voltage analysis for over-IR-drop nodes in P/G networks;(2) single-node statistical temperature analysis for hot spots in 3D thermal analysis;(3) fast single open-defect analysis for P/G networks.A large amount of experimental data demonstrates that compared with the global successive over-relaxation (SOR) algorithm,LSOR2 can speed up 1-2 orders of magnitudes with the same accuracy in ET analyses.     

Point-based manifold harmonics

This paper proposes an algorithm to build a set of orthogonal Point-Based Manifold Harmonic Bases (PB-MHB) for spectral analysis over point-sampled manifold surfaces. To ensure that PB-MHB are orthogonal to each other, it is necessary to have symmetrizable discrete Laplace-Beltrami Operator (LBO) over the surfaces. Existing converging discrete LBO for point clouds, as proposed by Belkin et al. [CHECK END OF SENTENCE], is not guaranteed to be symmetrizable. We build a new point-wisely discrete LBO over the point-sampled surface that is guaranteed to be symmetrizable, and prove its convergence. By solving the eigen problem related to the new operator, we define a set of orthogonal bases over the point cloud. Experiments show that the new operator is converging better than other symmetrizable discrete Laplacian operators (such as graph Laplacian) defined on point-sampled surfaces, and can provide orthogonal bases for further spectral geometric analysis and processing tasks.     

Simple culling methods for continuous collision detection of deforming triangles

We present a simple and efficient approach for continuous collision detection of deforming triangles based on conservative advancement. The efficiency of our approach is due to a sequence of simple collision-free conditions for deforming triangles. In our experiment, we show that our CCD algorithm achieves 2-30 times performance improvement over existing algorithms for triangle primitives.