钢厂设备轴承脂润滑技术进展

钢厂设备的润滑改进可以获得巨大的经济效益:减少停机时间,提高生产率;减少磨损,降低备件的更换量;延长设备的寿命:减少摩擦,节约能耗;减少润滑剂的消耗量等。早在10年前,美国就重视钢铁工业的润     

温度对粘性泥沙的沉速及淤积的影响

温度对粘性泥沙的沉速及淤积的影响［加拿大］Ｙ．Ｌ．ＬＡＵ主题词沉沙沉降，沉降速度，淤积计算，沙模拟试验，水温影响引言以往关于淤积的试验分析已经研究了影响淤积率加淤积度的不同因素，包括河床剪应力、泥沙类型、水化学特性等，但对温度因素的关注却较少。在北方...     

Effect of enhanced coagulation by KMnO(4) on the fouling of ultrafiltration membranes

Pre-coagulation enhanced by KMnO(4) before ultrafiltration (KCUF) was compared with normal pre-coagulation by alum (CUF) in the ultrafiltration of water from the Songhua River, China. The trans-membrane pressure (TMP) with KCUF was much lower than that when alum alone was used. With KCUF a slower increment of TMP occurred, even under conditions of high river water turbidity. The results also showed that the removal of COD, UV(254) and TOC was appreciably higher after adding 0.5mg/L KMnO(4) compared with CUF. Although assimilable organic carbon (AOC) was increased by permanganate treatment, the AOC of the permeate from KCUF was nearly the same as that from CUF, showing that the cake layer on the surface of KCUF membrane could adsorb small molecules more effectively than that of CUF. This result was confirmed by the apparent molecular weight (MW) distribution measured by size exclusion chromatography (SEC). It was shown that flocs formed by KMnO(4) and alum were larger than those formed only by alum, causing higher removal of flocs and higher permeation flux. Lower NOM was found in the permeate from the KCUF systems because oxidation and adsorption of organic matter on the flocs occurred. The membrane was partly clogged by organic matter or other materials including some small flocs.     

Automated analysis of nerve-cell images using active contour models

The number of nerve fibers (axons) in a nerve, the axon size, and shape can all be important neuroanatomical features in understanding different aspects of nerves in the brain. However, the number of axons in a nerve is typically in the order of tens of thousands and a study of a particular aspect of the nerve often involves many nerves. Potentially meaningful studies are often prohibited by the huge number involved when manual measurements have to be employed. A method that automates the analysis of axons from electron-micrographic images is presented. It begins with a rough identification of all the axon centers by use of an elliptical Hough transform procedure. Boundaries of each axons are then extracted based on active contour model, or snakes, approach where physical properties of the axons and the given image data are used in an optimization scheme to guide the snakes to converge to axon boundaries for accurate sheath measurement. However, false axon detection is still common due to poor image quality and the presence of other irrelevant cell features, thus a conflict resolution scheme is developed to eliminate false axons to further improve the performance of detection. The developed method has been tested on a number of nerve images and its results are presented.     

Building a portable data and information interoperability infrastructure-framework for a standard Taiwan Electronic Medical Record Template

Traditional electronic health record (EHR) data are produced from various hospital information systems. They could not have existed independently without an information system until the incarnation of XML technology. The interoperability of a healthcare system can be divided into two dimensions: functional interoperability and semantic interoperability. Currently, no single EHR standard exists that provides complete EHR interoperability. In order to establish a national EHR standard, we developed a set of local EHR templates. The Taiwan Electronic Medical Record Template (TMT) is a standard that aims to achieve semantic interoperability in EHR exchanges nationally. The TMT architecture is basically composed of forms, components, sections, and elements. Data stored in the elements which can be referenced by the code set, data type, and narrative block. The TMT was established with the following requirements in mind: (1) transformable to international standards; (2) having a minimal impact on the existing healthcare system; (3) easy to implement and deploy, and (4) compliant with Taiwan's current laws and regulations. The TMT provides a basis for building a portable, interoperable information infrastructure for EHR exchange in Taiwan.     

Characteristic of polychlorinated dibenzo-p-dioxins and dibenzofurans in fly ash from incinerators in china

Fly ash from municipal solid waste (MSW), medical waste (MW) and electrical power plant (EPP) incinerators were analyzed for polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). The study showed that the PCDD/F levels in fly ash were EPP < MSW < MW. The homologue profiles of PCDD/Fs in fly ash produced from waste incinerators were similar. However, the homologue profiles of PCDD/Fs in fly ash from electrostatic precipitator (ESP) of electrical power plant were different from that from waste incinerator. The strong correlation was found between the concentration of 2,3,4,7,8-PeCDF and the I-TEQ value of fly ash regardless of the different fly ashes sources.     

Analysis of the drude model in metallic films

A method, believed to be new, to simulate Drude parameters for collective oscillation of the free carriers in metallic films is proposed. Plasma resonance frequency and relaxation were simulated simultaneously from both the real and the imaginary parts of the dielectric function of a metallic film after consideration of their correlation in the Drude model. As examples, the contributions of the electrons in Ag films and of the free carriers in metallic silicide, NbSi(2) and TaSi(2), films have been studied.     

Effect of under-layer treatment of Ta/TaN barrier film on corrosion between Cu seed and Ta in chemical-mechanical-polishing slurry

Tantalum/tantalum nitride (Ta/TaNx) composite film is widely used as a copper (Cu) diffusion barrier layer. In order to reduce via-resistance, an additional argon (Ar) re-sputtering process is used to thin the barrier thickness at the feature bottom. In this study, the effect of Ar re-sputtering of the under-layer of TaNx barrier films on the corrosion between Cu seeds and upper Ta films in chemical-mechanical-polishing (CMP) slurries was investigated. The results show that Ar re-sputtering of the under-layer of the TaNx barrier has a strong influence on the corrosion of Cu seeds and Ta films. The equivalent circuit, simulated using data from electrochemical analysis, reveals changes in resistance and capacitance elements of the Cu-Ta electrochemical system, proving that the phase transformation of upper Ta films under different TaNx conditions leads to different degrees corrosion of Cu seeds and the Ta films.     

Protein crystallization in space

The microgravity environment of space is an ideal place to study the complicated protein crystallization process and to grow good-quality protein crystals. A series of crystal growth experiments of 10 different proteins was carried out in space on a Chinese re-entry satellite FSW-2 in August, 1992. The experiments were performed for about two weeks at a temperature of 18.5 +/- 0.5 degrees C using a tube-like crystallization apparatus made in the Shanghai Institute of Technical Physics, Academia Sinica. More than half of 48 samples from 6 proteins produced crystals, and the effects of microgravity on protein crystal growth were observed, especially for hen-egg white lysozyme and an acidic phospholipase A2 from the venom of Agkistrodon halys Pallas. Analyses of the crystallization of these two enzymes in this mission showed that the microgravity environment in space may be beneficial to improve size, external perfection, morphology, internal order, and nucleation of protein crystals. Some of these positive microgravity effects were also demonstrated by the growth of protein crystals in gelled solution with the above two enzymes. A structural analysis of the tetragonal lysozyme crystal grown in space is in progress.