Attenuation of anticonvulsant effects of diazepam after chronic treatment with bicuculline

Changes in the GABAergic system after chronic treatment with bicuculline were examined in two strains of inbred rats, Fischer 344 (F344) and Lewis (LEW). Rats received an IP injection of either bicuculline (2 mg/kg) or vehicle once a day for 12 days. After this chronic treatment, the effects of diazepam (1 mg/kg, IP) and pentobarbital (20 mg/kg, IP) on bicuculline-induced convulsions were measured. Bicuculline was acutely infused into a tail vein at 0.0415 mg/min, and the infusion was terminated when rats showed seizure. Following the chronic bicuculline treatment, the anticonvulsant effect of diazepam, but not of pentobarbital, was significantly reduced as compared to its effect following chronic vehicle treatment in both strains. Both diazepam and pentobarbital showed a significant difference in anticonvulsant effects between strains (F344 > LEW). The hypnotic effects of muscimol, barbital, pentobarbital, and ethanol following chronic bicuculline treatment were examined. There was no significant difference in sleep time induced by these drugs between bicuculline- and vehicle-treated rats. These results suggest that the attenuation of diazepam's anticonvulsant effect after chronic bicuculline treatment may result from functional changes in benzodiazepine receptors and that the anticonvulsant effects of diazepam and pentobarbital may be influenced by genetic factors. Moreover, the hypnotic effects of several drugs tested are apparently not affected by chronic bicuculline treatment.     

An Engineered Biliverdin-Compatible Cyanobacteriochrome Enables a Unique Ultrafast Reversible Photoswitching Pathway

Cyanobacteriochromes (CBCRs) are promising optogenetic tools for their diverse absorption properties with a single compact cofactor-binding domain. We previously uncovered the ultrafast reversible photoswitching dynamics of a red/green photoreceptor AnPixJg2, which binds phycocyanobilin (PCB) that is unavailable in mammalian cells. Biliverdin (BV) is a mammalian cofactor with a similar structure to PCB but exhibits redder absorption. To improve the AnPixJg2 feasibility in mammalian applications, AnPixJg2_BV4 with only four mutations has been engineered to incorporate BV. Herein, we implemented femtosecond transient absorption (fs-TA) and ground state femtosecond stimulated Raman spectroscopy (GS-FSRS) to uncover transient electronic dynamics on molecular time scales and key structural motions responsible for the photoconversion of AnPixJg2_BV4 with PCB (Bpcb) and BV (Bbv) cofactors in comparison with the parent AnPixJg2 (Apcb). Bpcb adopts the same photoconversion scheme as Apcb, while BV4 mutations create a less bulky environment around the cofactor D ring that promotes a faster twist. The engineered Bbv employs a reversible clockwise/counterclockwise photoswitching that requires a two-step twist on ~5 and 35 picosecond (ps) time scales. The primary forward P_fr → P_o transition displays equal amplitude weights between the two processes before reaching a conical intersection. In contrast, the primary reverse P_o → P_fr transition shows a 2:1 weight ratio of the ~35 ps over 5 ps component, implying notable changes to the D-ring-twisting pathway. Moreover, we performed pre-resonance GS-FSRS and quantum calculations to identify the Bbv vibrational marker bands at ~659,797, and 1225 cm⁻¹. These modes reveal a stronger H-bonding network around the BV cofactor A ring with BV4 mutations, corroborating the D-ring-dominant reversible photoswitching pathway in the excited state. Implementation of BV4 mutations in other PCB-binding GAF domains like AnPixJg4, AM1_1870g3, and NpF2164g5 could promote similar efficient reversible photoswitching for more directional bioimaging and optogenetic applications, and inspire other bioengineering advances.     

Observation of 3‐D Structure of Bubbles in a Fluidized Catalyst Bed

The interface area between the bubble and emulsion phases in a fluidized catalyst bed is one of the important parameters used to analyze and design the fluidized bed reactor. We used a fast‐scanning X‐ray CT system to observe the bubble shape and structure. We then obtained the transient 2‐dimensional cross sectional gas‐phase distribution in a fluidized catalyst bed. Using image‐processing techniques, pseudo 3‐dimensional images of the bubbles were reconstructed. The bubble structure was studied based on the 3‐dimensional images and the previously obtained results in a 2‐dimensional fluidized bed. It was found that the bubble shape was not spherical but complicated, and that the bubbles ascending in a fluidized catalyst bed consisted of some smaller bubbles.     

Synthesis of tetramethyl-p-silphenylenesiloxanedimethylsiloxane triblock copolymer by employing living anionic polymerization

Dimethylsiloxane-tetramethyl-p-silphenylenesiloxane-dimethylsiloxane (DMS-TMPS-DMS) triblock copolymer was synthesized by employing living anionic polymerization of hexamethylcyclotrisiloxane (D₃). Two synthetic methods were carried out for the polymerization. One of those methods was the anionic polymerization of D₃ initiated at the silanolate anion which was prepared from the terminal hydroxyl group of silanol-terminated TMPS prepolymer by reaction with n-butyllithium (method 1). The other was the coupling reaction of vinyl-terminated TMPS prepolymer with hydrosilyl-terminated DMS prepolymer obtained from the anionic polymerization of D₃ by using diphenylmethylsilanolate anion as initiator (method 2). In method 1, DMS contents of the copolymers ranged from 25.8 to 72.5 wt% and the values agreed with the ratio of D₃ to TMPS prepolymer. The weight-average molecular weights ranged from 1.36×10⁴ to 19.4×10⁴ and were close to the predicted values calculated from the $\text{M}\text{?}{}_{\mathrm{v}}$ of the TMPS prepolymer and the amount of D₃ added. In the case of method 2, weight-average molecular weights ranged from 19.5×10⁴ to 24.2×10⁴. The high molecular weight copolymer could thus be obtained by method 2. Intrinsic viscosity values of the triblock copolymers agreed with calculated values obtained by considering the copolymer as a binary mixture of these homopolymers. Differential scanning calorimetry and thermogravimetry were carried out on the triblock copolymers. The equilibrium melting temperatures of each of the copolymers were very close to that of poly-TMPS (160°C). The glass transition temperature and heat of fusion were decreased as the DMS content was increased. The thermogravimetric curves for the copolymers indicated that the thermal stability of the triblock copolymer was intermediate between the DMS and TMPS homopolymers.     

医用微型全量分析系统中的酶生物传感器研究

酶生物传感器由于其对被分析物具有高度的选择性,成为解决μTAS(微型全量分析系统)中,复杂体系下的多种组分同时测定问题一个有效方法.以基于葡萄糖氧化酶的葡萄糖传感器为例,研究了酶生物传感器对被分析物的选择特性,实验证明,酶生物传感器完全适用于μTAS 中多种组分同时测定的用途.     

Stability of discrete-time systems with quantized input and state measurements

This note focuses on linear discrete-time systems controlled using a quantized input computed from quantized measurements. Nominally stabilizing, but otherwise arbitrary, state feedback gains could result in limit cycling or nonzero equilibrium points. Although a single quantizer is a sector nonlinearity, the presence of a quantizer at each state measurement channel makes traditional absolute stability theory not applicable in a direct way. A global asymptotic stability condition is obtained by means of a result which allows us to apply discrete positive real theory to systems with a sector nonlinearity which is multiplicatively perturbed by a bounded function of the state. The stability result is readily applicable by evaluating the location of the polar plot of a system transfer function relative to a vertical line whose abcissa depends on the one-norm of the feedback gain. A graphical method is also described that can be used to determine the equilibrium points of the closed-loop system for any given feedback gain.     

Structural approach to nanoscience: a case study of complex and cluster formation in ZnBr2–ZnCl2 melts

Although the melt structure of glass-forming ZnCl₂ has so far been well studied, there exists quite little information on the structural change due to anion-substitution. In the present work, the short-range structure of ZnCl₂–ZnBr₂ mixture melts was analyzed systematically by time-of-flight pulsed neutron diffraction techniques, Raman spectroscopy, molecular orbital calculations, and molecular dynamics simulations. According to radial distribution analysis, it was found that there were tetrahedral structural units of ligand-substituted [ZnCl_nBr_4−n]²⁻ (n=0–4) in these melts, not implying the simple mixing of [ZnCl₄]²⁻ and [ZnBr₄]²⁻ units. Further detailed estimation indicated that the ligand-substituted complex anions were linked with each other by sharing a common anion.     

Development of Selective TGR5 Ligands Based on the 5,6,7,8-Tetrahydro-5,5,8,8-tetramethylnaphthalene Skeleton

TGR5, a G-protein-coupled receptor (GPCR), plays an important role in several physiological functions. TGR5 activation through bile acids induces an increase in energy expenditure. Therefore, synthetic TGR5 ligands could be useful for the treatment of obesity or dyslipidemia. In this study, we designed and synthesized a set of TGR5 ligands with a 5,6,7,8-tetrahydro-5,5,8,8-tetramethylnaphthalene (TMN) skeleton, and evaluated their TGR5 agonistic activity. We also investigated the selectivity of the synthesized compounds for TGR5 relative to the farnesoid X receptor (FXR) and retinoic acid receptor (RAR). Our results show that compound 4 b [N-(2-chlorophenyl)-5,6,7,8-tetrahydro-5,5,8,8-tetramethyl-2-naphthalenecarboxamide] exhibited potent TGR5 agonist activity with an IC₅₀ value of 8.4 nM without significant cytotoxicity. In addition, compound 4 b showed only slight agonistic activity toward FXR and RAR at 1 μM treatment. These data indicate that compound 4 b is a selective TGR5 agonist, and could be a promising therapeutic agent for dyslipidemia.     

The mechanism of formation of iron oxide and oxyhydroxides in aqueous solutions at room temperature

For a better understanding of the atmospheric rusting of iron and steels, the present work is aimed to explore the mechanism of formation of green rusts, Fe₃O₄, α-FeOOH, β-FeOOH, γ-FeOOH, δ-FeOOH and amorphous ferric oxyhydroxide in aqueous solution at room temperature. The formation processes on which end products are determined are strongly affected by the oxidation rate, pH and the structure and composition of initial and intermediate species of iron. The systematic diagram of formation processes of iron oxide and oxyhydroxides has been presented, in which both dissolved and solid species of iron are included.     

The mechanism of atmospheric rusting and the protective amorphous rust on low alloy steel

Atmospheric rusting of mild and low alloy steels was studied by means of infra-red and far infra-red spectrophotometries, X-ray and electron diffraction methods and scanning electron microscopy. The rusting process can be interpreted on the basis of a previously reported diagram for rust formation in aqueous solution.A large amount of amorphous matter in rust formed in semi-rural atmosphere was identified by infra-red and far infra-red spectra as amorphous ferric oxyhydroxide, FeO_x (OH)_8–2x. The amorphous ferric oxyhydroxide rust on low alloy steel was dense and uniform, and contained a considerable amount of bound water. From these results it can be concluded that the amorphous ferric oxyhydroxide rust acts as a protective barrier against atmospheric rusting of the steels. Cu, P and Cr in low-alloy steels are inferred to favour the formation of crack-free, uniform rust layer and help to produce uniform amorphous ferric oxyhydroxide.