Polymer cosolvent system

Summary Both preferential adsorption coefficient λ and intrinsic viscosity [η] for poly (di-o-alkylphenyl methacrylates) /Tetrahydrofuran (THF)/water have been determined. The results are discussed in relation to the steric effect of the ortho-substituent groups on the aromatic ring.     

Microstructure and Sliding Wear Behaviour of Ni(Cr)-TiB_2 Coatings Deposited by HVOF Spraying of SHS Powders

THERMAL SPRAYING provides a large range ofcoatings,which increase the wear resistance ofsubstrates[1].One of the major coating families is thecermet,composed of hard ceramic particles with ametallic binder.The most commonly used cermetcoatings in industrial applications are based on eitherthe WC-Co or the Cr3C2-Ni(Cr)systems with WC-17wt%Co and Cr3C2-25wt%Ni(Cr)being typicalcompositions[2,3].Although WC-Co deposits are hardand wear resistant at ambient temperatures their rangeof ap…     

Multiple responses analysis and modeling of Fenton process for treatment of high strength landfill leachate

Landfill leachate is one of the most recalcitrant wastes for biotreatment and can be considered a potential source of contamination to surface and groundwater ecosystems. In the present study, Fenton oxidation was employed for degradation of stabilized landfill leachate. Response surface methodology was applied to analyze, model and optimize the process parameters, i.e. pH and reaction time as well as the initial concentrations of hydrogen peroxide and ferrous ion. Analysis of variance showed that good coefficients of determination were obtained (R2 > 0.99), thus ensuring satisfactory agreement of the second-order regression model with the experimental data. The results indicated that, pH and its quadratic effects were the main factors influencing Fenton oxidation. Furthermore, antagonistic effects between pH and other variables were observed. The optimum H2O2 concentration, Fe(II) concentration, pH and reaction time were 0.033 mol/L, 0.011 mol/L, 3 and 145 min, respectively, with 58.3% COD, 79.0% color and 82.1% iron removals.     

An analytical procedure for dynamic response determination of a viscoelastic beam with moderately large deflection using first-order shear deformation theory

In this article, the dynamic response of a viscoelastic beam with moderately large deflection subjected to transverse and axial loads is studied using the first-order shear deformation theory. The von-Karman strain displacement relations and Hooke's law are used for formulation. The solution of the equations, which are a system of nonlinear partial differential equations, are obtained analytically using the perturbation technique in conjunction with the eigenfunction expansion method. The results are compared with the finite elements method. Also, a sensitivity analysis is performed, and the effects of geometrical and material properties are investigated on the response.     

Weighted and extended total variation for image restoration and decomposition

In various information processing tasks obtaining regularized versions of a noisy or corrupted image data is often a prerequisite for successful use of classical image analysis algorithms. Image restoration and decomposition methods need to be robust if they are to be useful in practice. In particular, this property has to be verified in engineering and scientific applications. By robustness, we mean that the performance of an algorithm should not be affected significantly by small deviations from the assumed model. In image processing, total variation (TV) is a powerful tool to increase robustness. In this paper, we define several concepts that are useful in robust restoration and robust decomposition. We propose two extended total variation models, weighted total variation (WTV) and extended total variation (ETV). We state generic approaches. The idea is to replace the TV penalty term with more general terms. The motivation is to increase the robustness of ROF (Rudin, Osher, Fatemi) model and to prevent the staircasing effect due to this method. Moreover, rewriting the non-convex sublinear regularizing terms as WTV, we provide a new approach to perform minimization via the well-known Chambolle's algorithm. The implementation is then more straightforward than the half-quadratic algorithm. The behavior of image decomposition methods is also a challenging problem, which is closely related to anisotropic diffusion. ETV leads to an anisotropic decomposition close to edges improving the robustness. It allows to respect desired geometric properties during the restoration, and to control more precisely the regularization process. We also discuss why compression algorithms can be an objective method to evaluate the image decomposition quality.     

Online learning of task-driven object-based visual attention control

We propose a biologically-motivated computational model for learning task-driven and object-based visual attention control in interactive environments. In this model, top-down attention is learned interactively and is used to search for a desired object in the scene through biasing the bottom-up attention in order to form a need-based and object-driven state representation of the environment. Our model consists of three layers. First, in the early visual processing layer, most salient location of a scene is derived using the biased saliency-based bottom-up model of visual attention. Then a cognitive component in the higher visual processing layer performs an application specific operation like object recognition at the focus of attention. From this information, a state is derived in the decision making and learning layer. Top-down attention is learned by the U-TREE algorithm which successively grows an object-based binary tree. Internal nodes in this tree check the existence of a specific object in the scene by biasing the early vision and the object recognition parts. Its leaves point to states in the action value table. Motor actions are associated with the leaves. After performing a motor action, the agent receives a reinforcement signal from the critic. This signal is alternately used for modifying the tree or updating the action selection policy. The proposed model is evaluated on visual navigation tasks, where obtained results lend support to the applicability and usefulness of the developed method for robotics.     

Quantum dot light emitting devices for photomedical applications

While OLEDs have struggled to find a niche lighting application that can fully take advantage of their unique form factors as thin, flexible, lightweight and uniformly large‐area luminaire, photomedical researchers have been in search of low‐cost, effective illumination devices with such form factors that could facilitate widespread clinical applications of photodynamic therapy (PDT) or photobiomodulation (PBM). Although existing OLEDs with either fluorescent or phosphorescent emitters cannot achieve the required high power density at the right wavelength windows for photomedicine, the recently developed ultrabright and efficient deep red quantum dot light emitting devices (QLEDs) can nicely fit into this niche. Here, we report for the first time the in‐vitro study to demonstrate that this QLED‐based photomedical approach could increase cell metabolism over control systems for PBM and kill cancerous cells efficiently for PDT. The perspective of developing wavelength‐specific, flexible QLEDs for two critical photomedical fields (wound repair and cancer treatment) will be presented with their potential impacts summarized. The work promises to generate flexible QLED‐based light sources that could enable the widespread use and clinical acceptance of photomedical strategies including PDT and PBM.     

Fabrication and characterization of highly efficient three component CuBTC/graphene oxide/PSF membrane for gas separation application

Metal organic frameworks (MOFs) with marvelous properties have aroused enormous attention for different application especially gas adsorption and separation. In this regard, fabrication of MOF hybrids with carbon based materials is new strategy to upgrade MOF performance. In this study CuBTC (Copper benzene-1,3,5-tricarboxylic acid)/graphene oxide (GO) composite was synthesized and characterized by BET, SEM, TGA, XRD and FT-IR techniques. Then CuBTC and CuBTC/GO composite were incorporated into polysulfone (PSF) polymer to construct mixed matrix membranes (MMMs). The obtained membranes were characterized by SEM, TGA, XRD and tensile tests and their gas permeability was measured. The results were compared to those of CuBTC/PSF MMMs. It was revealed that CuBTC/GO composite as filler showed superior performance relative to CuBTC. For instance, 15 wt% loading of CuBTC/GO in PSF represented outstanding gas separation behavior while the same loading of CuBTC in PSF deteriorated performance of MMM. Well particle dispersion and favorable polymer-filler interaction were responsible for such observed difference. A high H₂/CH₄ and H₂/N₂ selectivity of 80.03 and 70.46 were recorded for CuBTC/GO in PSF (15 wt%) compared to 44.56 and 40.92 for CuBTC in PSF (15 wt%).     

A novel and developed approximation for motion of a spherical solid particle in plane coquette fluid flow

The present article solves the couple equations of a spherical solid particle’s motion in plane coquette fluid flow by using the HPM-Padé technique which is a combination of the Homotopy Perturbation Method (HPM) and Padé approximation. The series solutions of the couple equations are developed. Generally, the truncated series solution is adequately in a small region and to overcome this limitation, the Padé techniques which have the advantage of turning the polynomial approximation into a rational function, are applied to the series solution to improve the accuracy and enlarge the convergence domain. The current results compared with those derived from HPM and the established fourth order Runge–Kutta method in order to ascertain the accuracy of the proposed method. It is found that this method can achieve more suitable results in comparison to HPM.     

Mesoporous silica coated gold nanorods: a multifunctional theranostic platform for radiotherapy and X-ray imaging

Journal of Porous Materials - The development of theranostic nanostructures is one of the most advanced branches of pharmaceutical and medical sciences in the world today. Due to the unique...