Volumetric out-of-furnace heat treatment of 3600-M3 decomposers

Specifications require that all the welds in 12-m-diam. decomposers with a capacity of 3600 m³ be subjected to high-temperature tempering before going into service in order to alleviate the stresses from the welding operation. Specialists at the organizations VNIIPTkhimnefteapparatury and VNIImontazhspetsstroi have proposed out-of-furnace volumetric (complete) of the assembled decomposer with the use of special heaters. The use of this heating method has shortened assembly operations while providing the welds with a highquality heat treatment and reducing the stresses overall (including welding stresses, stresses from assembly of the decomposer, etc.) The technology ensures uniform heating of the housing of the decomposer and provides for close control over the process. The experience gained in heat-treating decomposers can also be used in the construction of other containers that come into contact with corrosive media. __________ Translated from Metallurg, No. 3, pp. 61–64, March, 2006.     

Spontaneous and stimulated emission from CdxHg1−x Te semiconductor films

The experimental data on observation of spontaneous and stimulated emission from thin epitaxial Cd_xHg_1?x Te films optically pumped by Nd: YAG laser radiation are reported. A simple theoretical model is suggested to describe the initiation of population inversion under these conditions. The parameters realized under the experimental conditions are theoretically estimated.     

Total and Fractional Performance of Granular Dust Traps in Refractory Production

Methods are proposed for designing interpolation models for the preliminary determination and subsequent forecasting of general and fractional breakthrough coefficients for dust used with granular filters, as employed in energy-saving and high-performance dust trapping from technological gases and ventilation discharges in refractory production. The models are supplied with nomograms, which makes them widely suitable for experts working in environmental protection at refractory-producing organizations. The main factors are identified that influence the performance. The results are of interest to experts in related areas of industry such as building materials and engineering ceramics and so on. Translated from Novye Ogneupory, No. 4, pp. 64–67, April, 2008.     

Nonuniformity of phase structure in immiscible polymer blends

This article is focused on the phase structure development in immiscible polymer blends during melt mixing. Nonuniformity of the phase structure, i.e., the coexistence of areas containing particles with markedly different size distribution, was detected in quenched and compression molded samples of a number of various blends prepared by long and intensive mixing in the chamber of a Plasticorder. The same effect was found also for polystyrene/polyamide blends prepared in a twin‐screw extruder. It was shown that neglecting nonuniformity of the phase structure can lead to considerable error in evaluation of the effect of system parameters on the blend morphology. The reasons for the effect were discussed and it was found that inhomogeneous flow field in mixers is a plausible explanation of the nonuniform phase structure. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Influence of Cu<Superscript>2+</Superscript> ions on structural and magnetic properties of NiZn ferrites

The paper is devoted to the preparation of NiZn ferrite with small substitutions of copper by means of ceramic technology. The influence of small Cu substitution on the microstructural and magnetic properties of NiZn ferrites have been analysed by means of various experimental methods and interpreted from the point of view of preparation technology optimisation and possible applications of such materials. A strong correlation between the substituent content and resulting properties has been observed, thus allowing preparation of material with the properties tailored for any particular application.     

Effect of cyclosporin on the activity of cytidine deaminase and adenosine deaminase in the serum and polymorphonuclear leukocytes of patients with rheumatoid arthritis

Cytidine deaminase (CDA) and adenosine deaminase (ADA) were investigated in the serum and polymorphonuclear leukocytes (PMNLs) of healthy controls and ten patients with rheumatoid arthritis before and during cyclosporin therapy. CDA was significantly raised in the serum and decreased in the cells of patients. A dramatic increase (10-fold or more) in CDA activity was observed in the cells of some patients after only one month of cyclosporin therapy. Serum CDA significantly increased after three months' therapy. While the increase in serum CDA level during therapy was transient, the enzyme level in cells remained permanently raised, as shown in two patients evaluated for sixteen months. ADA in the serum of RA patients was somewhat higher as compared with healthy controls and remained almost unchanged during cyclosporin therapy. ADA activity in the cells also increased, but compared with the increase in CDA activity this increase was lower. Cyclosporin increased both CDA and ADA activities in PMNLs of RA patients. The dramatic increase in CDA observed in PMNLs of patients could be the cause of the transient increase in CDA in the serum. Further investigations will show to what extent this property of cyclosporin can reflect the immunoregulatory effect of this drug.     

Impedance spectroscopy of ultrafine-grain SnO2 ceramics with a variable grain size

The impedance spectra of nanocrystalline SnO₂ ceramics with an average grain size d ranging from 3 to 43 nm were investigated in the frequency range 1–10⁶ Hz at temperatures from 25 to 300°C in a dry oxygen atmosphere. Analysis of the experimental data by the graphoanalytical method made it possible to separate the contributions of grain bulk and grain boundaries to the conductivity. It is shown that the samples investigated can be arbitrarily divided into two groups with respect to the character of their conductivity. For the samples with an average grain size d < 25 nm, the charge transfer processes are almost completely determined by the grain boundaries. In samples with a larger grain size, the contribution of grain bulk to the conductivity is comparable with that of grain boundaries.     

Thin-film nickel coatings on fiber materials

Vacuum deposition of thin films onto fiber materials is a promising method of obtaining electromagnetic screens. We have studied the structure and the electromagnetic properties of machine-knitted fabric coated with nickel by means of magnetron sputtering. When the fabric is irradiated from the metal-coated side, the reflection coefficient is higher by a factor of 1.4 as compared to the case when the same source of electromagnetic radiation is situated on the opposite side (facing the uncoated surface), while the absorption coefficient in both cases is the same.     

Many-body effects and electron tunneling in metal-insulator-p-type semiconductor structures

Investigation of the tunneling conductivity σ _d(V) of structures made on a highly doped, narrow-gap p-type semiconductor HgCdTe reveals an abrupt increase in this quantity at voltages corresponding to the start of tunneling into the conduction band. It is shown that the observed functions σ _d(V) cannot be described in the framework of a model based on single-particle tunneling. It is proposed that the abrupt increase in σ _d(V) is attributable to tunneling into exciton states. Fiz. Tekh. Poluprovodn. 32, 1069–1072 (September 1998)     

Initial results of an in vitro fertilization and embryo transfer program in a private health institution

Between October 1994 and the end of February 1995 115 patients were included in our programme. In these patients we monitored 141 cycles, performed 128 punctures and 100 ET. In 14 instances (9.2%) the cycle was abolished. By puncture of 1468 follicles 1370 oocytes were obtained which corresponded to a recovery rate of 93.3%. On average by aspiration 11.9 oocytes per patient were obtained. From the total number of acquired oocytes 54.6% were fertilized and 43.5% divided. Of 596 embryos 290 were transferred and the remainder was vitrified. A total of 17 clinical pregnancies were achieved, incl. 5 which terminated by abortion, the remainder proceeds. The authors are aware that they present a relatively small group during a short period of time, and thus the first results of the centre cannot be presented as a current standard. Despite this the results permit some optimism for the future and indicate a certain amount of standardization of the authors' clinical and laboratory work.