排序方式: 共有31条查询结果,搜索用时 15 毫秒
1.
Interface structure and formation mechanism of vacuum-free vibration liquid phase diffusion-bonded joints of SiCp/ZL101A composites 总被引:1,自引:0,他引:1
The vacuum-free vibration liquid phase(VLP) diffusion-bonding of SiCp/ZL101A composites was investigated. The effects of vibration on the interface structure, the phase transformation and the tensile strength of bonded joints were examined. Experimental results show that the oxide film on the surface of the composites is a key factor affecting the tensile strength of boned joints. The distribution of the oxide layers at the interface changes from a continuous line to a discontinuous one during vibration. The tensile strength of the VLP diffusion-bonded joints increases with the vibration time, and is up to the maximum of 172 MPa when the vibration time is 30 s. The phase structure of the bond region changes from the Zn-Al-Cu hyper-eutectic (η (β η) (β η ε)) phases to Al-rich Al-base solid solution (α-Al) with increasing the vibration time. 相似文献
4.
为研究金属钎料与SiC陶瓷的界面结合方式,采用基于密度泛函理论的第一性原理方法,对Sn(001)/4H-SiC(0001)界面进行几何优化,得到优化后界面体系的结构,从分离功表征结合强度以及电子结构布居分析的角度解释界面结合本质和键合方式。结果表明:SiC陶瓷中C封端界面的分离功高于Si封端界面的分离功,Sn原子与C原子间形成的离子共价键在界面结合的成键中占有主要的地位。 相似文献
5.
6.
7.
8.
超声波钎焊技术始于上世纪30年代末,它无需钎剂即可实现铝合金、铝基复合材料、钛合金、陶瓷等难润湿材料的连接,被普遍认为是替代钎剂钎焊最有前途的方法。钎料/母材润湿界面氧化膜的去除是超声波钎焊中的一个主要问题,氧化膜的残留将严重影响钎焊质量。本文针对铝合金表面液态钎料声致铺展前沿往往存在氧化膜残留的问题,采用实验与模拟相结合的方法分析了氧化膜残留的特征、原因,并提出相应的消除措施。本文的研究工作对提高超声波涂覆、表面金属化以及超声波钎焊的质量具有重要意义。 相似文献
9.
文中将静止轴肩技术应用到铝镁异种合金的搅拌摩擦搭接过程中,并分析了焊接速度对接头成形和力学性能的影响.结果表明,静止轴肩能够增强上下板之间的材料交换,焊后搅拌区呈较大的洋葱环形貌,其内部分布大量的金属间化合物;搭接面处发生良好的冶金结合.由于生成金属间化合物,洋葱环区域的显微硬度值明显高于接头其它区域.X射线衍射结果表明,金属间化合物的主要成分是Al3Mg2和Al12Mg17.接头的抗拉强度随着焊接速度的增加呈先上升后下降的趋势,最大值在焊接速度为40 mm/min时取得. 相似文献
10.