贵港航运枢纽工程通过交工验收

广西西江航运建设二期贵港航运枢纽工程交工验收会于2001年1月10日至12日在贵港举行。 　　本次验收工作由区交通厅主持，参加单位有工程指挥部、监理部、设计单位、施工单位及运行单位。在验收会上，各方代表对广西电力院的设计工作给予了很高的评价。区交通厅质量监督站对本工程的质量等级核定为优良。经过一年多试运行考验，所有设备运行指标均达到设计要求。1999年2月1日至2000年11月30日发电量已达9.16亿kW*h，创电费收入2.437亿元，开始发挥巨大的工程效益。 　　 (撰稿　刘益祥)     

THERMAL DEBINDING OF A NEW BINDER

ＴＨＥＲＭＡＬＤＥＢＩＮＤＩＮＧＯＦＡＮＥＷＢＩＮＤＥＲ①ＺｈｏｕＪｉｃｈｅｎｇ，ＨｕａｎｇＢａｉｙｕｎ，ＷｕＥｎｘｉ，ＹｕＬｉｇｏｎｇ，ＱｕＸｕａｎｈｕｉＮａｔｉｏｎａｌＫｅｙＬａｂｏｒａｔｏｒｙｆｏｒＰｏｗｄｅｒＭｅｔａｌｕｒｇｙ，Ｃｅｎｔｒａ...     

利用“球化效应”激光扫描制备球形Ti粉的研究

利用“球化效应”，在SLS设备上探索将异形Ti粉转化为高性能球形粉末的可行途径。通过系统地改变激光功率、扫描速度，以及选取合适的激光扫描间距，探明了形成“球化效应”的工艺条件，并在激光功率为600W，扫描速度为30mm／s时，获得了较为理想的球形Ti粉。通过对球化过程进行理论分析，得出了选取激光扫描制备球形Ti粉工艺参数的准则。     

Effect of a direct magnetic field on the interfacial microstructure between molten aluminium and solid iron

Many processing techniques, such as hot dip aluminizing, bimetal formation, liquid metal corrosion, cementing, welding and diffusion bonding, are basically dependent on interfacial reactions [1-3]. It is therefore important to investigate the formation and growth of intermetallic layers at the interface. There have been several studies carried out to examine chemical compositions and growth kinetics of intermetallic layers in the Al-Fe system [4-9]. Most authors have come to an agreement that…     

Calculation of cooling rate of amorphous aluminum alloy melt-spun ribbons

Based on the heat transfer theory and liquid solidification theory, the heat transfer during the rapid solidification process of amorphous ribbons prepared by melt spinning was approximately modeled by one-dimensional heat conduction equation. Besides, integration with the temperature gradient, the relationship between the ribbon thickness and solidification time was derived according to the boundary conditions of ribbon-copper wheel. A simply theoretical model was obtained to calculate the cooling rates of aluminum amorphous ribbons. According to the above theoretical model, the critical cooling rate of aluminum amorphous ribbons by melt spinning is above 10^6 K/s, which proves that the aluminum based alloys belong to the marginal glass forming ability of alloys. The calculated results are in good agreement with other estimated values reported previously.     

Advances in the research of nitrogen containing stainless steels

The current status of nitrogen containing stainless steels at home and aboard has been introduced. The function and existing forms of nitrogen in the stainless steels, influence of nitrogen on mechanical properties and anti-corrosion properties as well as the application of nitrogen containing cast stainless steels were discussed in this paper. It is clear that nitrogen will be a potential and important alloying element in stainless steels. And Argon Oxygen Decarbonization (AOD) refining can provide an advanced manufacture process for nitrogen containing stainless steels with ultra-low- carbon and high cleanliness.     

夹层式结构在金刚石钻头上的应用

采用冷压成型夹层和加灰(过渡层)热压烧结法制备了一种夹层结构金刚石钻头.经与普通金刚石钻头进行对比试验发现,夹层结构钻头速度和使用寿命比普通钻头有了明显的提高,其原因是由于钻头工作时岩脊的体积破碎作用.这样初步找到了一种既能提高金刚石钻头钻进速度,又能增加金刚石钻头寿命的制造方法.     

我国企业集团管控模式类型与选择研究

国内外关于集团型企业管理控制理论文献看,并未形成系统化的理论。本论文论述企业集团管控要素与管控模式以及模式选择原则,以便于指导我国企业集团管理控制系统构建。     

EFFECT OF COMPOSITION ON PHYSICAL PROPERTIES OF AMORPHOUS Fe-Si-B ALLOYS

ＥＦＦＥＣＴＯＦＣＯＭＰＯＳＩＴＩＯＮＯＮＰＨＹＳＩＣＡＬＰＲＯＰＥＲＴＩＥＳＯＦＡＭＯＲＰＨＯＵＳＦｅＳｉＢＡＬＬＯＹＳ①ＷａｎｇＬｉｎｇｌｉｎｇ，ＺｈａｏＬｉｈｕａ，ＨｕＷａｎｇｙｕ，ＷｕＬｉｊｕｎ，ＺｈａｎｇＢａｎｇｗｅｉＤｅｐａｒｔｍｅ...     

Discussion on compact mechanism of air-stream and synchro-formed clamp plate impact molding

1 .Introduction Due to many advantages such as simple molding machine structure high compact compaction of sand mold, speed and well-distributed the air-stream impact molding method However, has been extensively used in production.when this molding method is applied to mold complicated pattern with wider top surface and deep