排序方式: 共有13条查询结果,搜索用时 15 毫秒
1.
X线管在生产制造和使用过程中,一般处于高压加载的工作条件下,经常会出现打火放电现象。结合模糊PID控制技术和触发定时电路设计了一种高压电源打火自恢复保护电路。当X射线源控制系统接收到打火放电信号脉冲时,能自动降低高压电源输出至预设的安全值并保持此功率锁定状态,直至打火结束后恢复输出。X线管检测老练平台应用实验表明,在非必须关断、重启的情况下,该电路可显著提升X线管高压电源的动态性能,提高X线管老练工艺效率,保护设备安全,同时也可适用于各类X光机高压电源设计应用场合。 相似文献
3.
一种单片机控制的高压开关电源 总被引:2,自引:1,他引:1
针对X射线荧光分析装置对供电高压电源在效率、体积和智能控制等方面的要求,研制了一种以单片机和脉宽调制(PMW)技术为基础的高压电源.以单片机89C52为控制主体,采用单端式推动、PID算法稳压控制,经变压器和倍压整流后输出高压.电源输出在0~50 kV连续可调,且体积小、效率高、长期运行性能稳定. 相似文献
4.
介绍了用能量色散X射线荧光光谱(EDXRF)法测定石灰岩矿中Ca含量的分析方法。该方法将石灰岩矿样品粉碎,加入AgNO_3溶液反应产生AgCl沉淀,用EDXRF法测量AgCl沉淀物中Ag含量,再通过测得的Ag含量换算成Ca含量。实验结果表明:该方法测量结果的相对误差不大于0.7%,RSD不大于1.6%;与WDXRF法比较,测量石灰岩矿中Ca含量为49.28%时,其相对误差为1.38%。 相似文献
5.
6.
7.
8.
9.
本文介绍了一种用于直流高压电源的束流调节保护电路。该电路具有多重保护措施,包括电容对强干扰的抑制、压敏电阻的电压钳位以及二极管限幅电路等。束流检测信号经保护电路连接到束流调节器,通过对束流信号进行运算放大,并与保护阈值电压进行比较,确定输出过流信号,触发单向可控硅,控制继电器的吸合,从而实现电源电路保护的目的。仿真和实验结果表明,该电路结构合理、灵敏可靠,为电源电路系统的安全运行提供了有效的保障。 相似文献
10.
We researched the electric heating property from butyl rubber-loaded boron carbide composite. The effects of boron carbide content on bulk resistivity, voltage-current characteristic, thermal conductivity and thermal stability of boron carbide / butyl rubber (IIR) polymer composite were introduced. The analysis results indicated that the bulk resistivity decreased greatly with increasing boron carbide content, and when boron carbide content reached to 60%, the bulk resistivity achieved the minimum. Accordingly, electric heating behavior of the composite is strongly dependent on boron carbide content as well as applied voltage. The content of boron carbide was found to be effective in achieving high thermal conductivity in composite systems. The thermal conductivity of the composite material with added boron carbide was improved nearly 20 times than that of the pure IIR. The thermal stability test showed that, compared with pure IIR, the thermal stable time of composites was markedly extended, which indicated that the boron carbide can significantly improve the thermal stability of boron carbide / IIR composite. 相似文献