排序方式: 共有31条查询结果,搜索用时 93 毫秒
1.
2.
自80年代末,处理阵列的研究的一个新方向是设计线性阵列。在这方面,Lee和Kedem作出开创性的工作,他们提出了一个线性阵列设计框架,但是,目前还没有一个有效的设计方法。在文中,提出了一个线性阵列的设计方法,基于它,线性阵列的设计者通过分析算法对应的数据依赖图的最长路径,就可以获得可行的设计。 相似文献
3.
4.
5.
In order to solve kinematic redundancy problems of a hydraulic quadruped walking robot, which include leg dragging, sliding, impingement against the ground, an improved gait planning algorithm for this robot is proposed in this paper. First, the foot trajectory is designated as the improved composite cycloid foot trajectory. Second, the landing angle of each leg of the robot is controlled to satisfy friction cone to improve the stability performance of the robot. Then with the controllable landing angle of quadruped robot and a geometry method, the kinematic equation is derived in this paper. Finally, a gait planning method of quadruped robot is proposed, a dynamic co-simulation is done with ADAMS and MATLAB, and practical experiments are conducted. The validity of the proposed algorithm is confirmed through the co-simulation and experimentation. The results show that the robot can avoid sliding, reduce impingement, and trot stably in trot gait. 相似文献
6.
制作了不同结构类型液压衬套的实验样件,测试得到其静、动特性的变化特性,并对比分析了不同结构液压衬套的作用机理。建立了多惯性通道-多节流孔式液压衬套的集总参数模型,给出了其动刚度和滞后角的计算分析公式和滞后角峰值频率的计算公式,计算结果与实验值一致,验证了计算模型的正确性。分析了多通道式液压衬套的动特性与通道数目数量及其截面形状的关系。所采用的分析方法及结论,可为液压衬套的初级阶段的设计及选型提供参考。 相似文献
7.
随着电动汽车的广泛使用,锂离子动力电池俨然成为纯电动汽车首选的动力来源,然而其热安全性问题也日益突出.基于此,本文针对车用锂离子动力电池在服役工况下尤其高温时存在的安全性差、工作不可靠及循环寿命短等热问题,根据电池的动态散热特性着重介绍了车用锂离子动力电池常用的冷却方法,包括空冷散热、液冷散热、相变材料冷却、热管冷却和耦合散热,说明了集多种冷却方式耦合的热管理系统与单一散热方法相比不仅能提高散热效率,还可以改善电池的均温性.并结合上述散热方法的研究进展及关键技术,主要在空冷通道优化、液冷结构设计及冷却液介质分析、相变材料应用特性、热管的冷却特性及热特性等方面进行了具体综述.最后,针对目前常用的动力电池散热方法中存在的问题提出了合理化建议,展望了电池热管理系统与汽车乘员热舒适性、电动机舱热管理及车辆热环境相耦合,形成整车热管理系统的开发,以期为电池热管理系统设计开发等相关领域的研究提供一定参考. 相似文献
8.
在不同振幅位移激励下,测试了一汽车液压衬套的动刚度、滞后角随频率的变化特性。建立了液压衬套动态特性分析的非线性集总参数模型,基于模型,探讨了液压衬套橡胶主簧、惯性通道与液压衬套动特性之间的关系,计算结果与实验结果的一致,验证了计算模型分析的正确性。分析建立的集总参数模型,表明液压衬套在不同位移振幅激励下,存储动刚度具有不动特征点及在高频激励下动刚度趋于定值的特性。基于这种特性发展了模型参数的辨识方法,并对液压衬套集总参数模型中的参数进行了识别,利用识别得到的参数对液压衬套的动特性进行了计算,验证了识别得到的参数的正确性。 相似文献
9.
10.
Most existing legged robots are developed under laboratory environments and,correspondingly,have good performance of locomotion.The robots‘ability of walking on rough terrain is of great importance but is seldom achieved.Being compliant to external unperceived impacts is crucial since it is unavoidable that the slip,modeling errors and imprecise information of terrain will make planned trajectories to be followed with errors and unpredictable contacts.The impedance control gives an inspiration to realize an active compliance which allows the legged robots to follow reference trajectories and overcome external disturbances.In this paper,a novel impedance force/position control scheme is presented,which is based on Cartesian force measurement of leg's end effector for our hydraulic quadruped robot The simulation verifies the efficiency of the impedance model,and the experimental results at the end demonstrate the feasibility of the proposed control scheme. 相似文献