用于0.4 kV微电网的四桥臂APF改进型控制策略研究

采用无谐波检测控制原理,提出一种基于多内模原理的四桥臂APF改进型控制策略。首先通过等量代换直接将网侧电流、直流母线电压作为状态变量,建立四桥臂APF在αβγ静止坐标系下的数学模型。然后,针对应用于0.4 kV微电网的四桥臂APF的特殊要求:功率波动频繁、动态响应速度快,在αβγ静止坐标系下采用所提出的四桥臂APF改进型控制策略,即由比例积分PI、矢量谐振VR、重复控制RC构成的多内模复合控制器作为四桥臂APF的电流环控制器,使得四桥臂APF具有动态响应速度快、稳态精度高、计算量小的特点,为0.4 kV微电网的优质电能提供保障。最后通过仿真和实验验证所提控制策略的可行性。     

MC型埋刮板输送机的改进设计

针对原MC型埋刮板输送机在生产中出现的运转不稳定等问题,对刮板输送机机体的下料装置、刮爪形式、防粘装置进行了改进设计,并进行了生产验证。结果表明:改进后的刮板输送机运行平稳可靠、性能稳定,杜绝了跳链、断链等现象的发生,刮板输送机运载电流由20 A降到18 A,保证了油脂浸出车间的生产安全。     

万华化学盈利秘籍:“躺着也赚钱”

<正>通过技术垄断形成优质品牌,通过优质品牌占据市场高端位置,获取超额利润,这几乎是世界所有知名品牌形成的共同路径万华化学集团股份有限公司(万华化学)是一家全球化运营的化工新材料公司,业务涵盖MDI、TDI、聚醚多元醇等聚氨酯产业集群,丙烯酸及酯、环氧丙烷等石化产业集群,水性PUD、     

Separation of hematite from banded hematite jasper (BHJ) by magnetic coating

The separation of iron oxide from banded hematite jasper(BHJ) assaying 47.8% Fe, 25.6% Si O2 and 2.30%Al2O3 using selective magnetic coating was studied. Characterization studies of the low grade ore indicate that besides hematite and goethite,jasper, a microcrystalline form of quartzite, is the major impurity associated with this ore. Beneficiation by conventional magnetic separation technique could yield a magnetic concentrate containing 60.8% Fe with 51% Fe recovery. In order to enhance the recovery of the iron oxide minerals, fine magnetite, colloidal magnetite and oleate colloidal magnetite were used as the coating material. When subjected to magnetic separation, the coated ore produces an iron concentrate containing 60.2% Fe with an enhanced recovery of56%. The AFM studies indicate that the coagulation of hematite particles with the oleate colloidal magnetite facilitates the higher recovery of iron particles from the low grade BHJ iron ore under appropriate conditions.     

一种导致装载机摇臂变形故障的特别工况

摇臂是装载机工作装置中重要的力传递部件,也是装载机上比较容易失效的部件之一。针对50F型装载机摇臂变形问题,利用UG NX7.5建立了50F型装载机摇臂的三维实体模型,将实体模型导入ANS YS Workbe nch中进行分析,在典型工况下摇臂受力分析强度满足要求。重新对作业工况确认,得到了装载机推平作业工况,该特殊工况摇臂所受应力最大。通过装载机工况的研究,确定了摇臂受力最恶劣工况,为后续摇臂的结构设计改进提供了理论依据。     

Critical parameters near the ferromagnetic-paramagnetic phase transition in La0.67–xYxBa0.23Ca0.1MnO3 compounds（x=0.10 and x=0.15）

The critical properties of the mixed manganite La0.67–x Y x Ba0.23Ca0.1Mn O3 with x=0.10 and x=0.15 around the paramagnetic(PM)-ferromagnetic(FM) phase transition were investigated through various techniques. These involved modified Arrott plots, Kouvel-Fisher method and Widom scaling relation. Magnetic data, analyzed in the critical region, using the above methods, yielded the critical exponents for(x=0.10) La0.57Y0.10Ba0.23Ca0.1Mn O3(β=0.312±0.002 and γ=1.147±0.003 at T C=299.23±0.05 K). Moreover, the estimated critical exponents of(x=0.15) La0.52Y0.15Ba0.23Ca0.1Mn O3 were β=0.286±0.004 and γ=0.943±0.002 at T C=289.53±0.06 K. The critical exponents’ values were close to the theoretical values of 3D-Ising model and tricritical mean-field model. These results suggested that the present composition should be close to a tricritical point in the La0.67–x Y x Ba0.23Ca0.1Mn O3 phase diagram. Expressing the field dependence as ΔS M∝H n allowed us to establish a relationship between the exponent n and the critical exponents of the material and to propose a phenomenological universal curve for the field dependence of ΔS M.     

低温氮、磁化综合处理钻头使用性能提高的X射线和电子显微技术分析研究

在地质钻探和石油钻井中,钻头都是非常重要的钻进工具。其技术特性,特别是硬度和耐磨性与钻探的技术经济指标,即与机械钻速、钻头进尺和每米钻探成本直接相关。为了提高钻头的工作性能,俄罗斯南方国立技术大学提出了综合低温淬火、磁化回火处理钻头的方法。经过综合处理后,钻头体、复合片底座和钎焊层的硬度分别提高了30%、3%和22%。野外钻进试验结果表明,经过低温液态氮和磁化综合处理的与未经综合处理的钻头相比,每次试验钻头进尺都有提高,总体上钻头进尺提高了22.2%,取得了很好的钻进效果。并对取得的效果进行了X射线和显微技术分析。     

石油行业计算机应用50年回顾篇(一) 资源为本 计算为用

上午十点,窗外阴霾的天空酝酿着北京久违的雪花,我在期待着一位客人。他73岁高龄,与王进喜在不同的岗位上并肩奋战,共同分享国庆十周年为祖国奉献石油的喜悦。他披风沐雨,穿过甘肃的风、塔里木的沙、南海的波涛,来到我刊只为了一个共同回顾的相约,为了一次50周年的纪念。     

Optical Properties of One-dimensional Three-component Photonic Band Gap Structure

1　IntroductionMaterialswithPhotonicBandGaps (PBG’s)havebeenwidelystudiedboththeoreticallyandex perimentallyinthepastfew years[1～ 4] .Theexis tenceofgaps,which prohibitthepropagationofelectromagnetic (EM )wavesinacertainrangeoffrequencies,canhavesignificantimpactsbothinsci enceandtechnology .Manypracticalapplicationsofthesestructureshavebeensuggestedanddemon strated ,suchasPhotonicCrystal (PC)microcavi ties[5] ,infraredPC[6] ,PClens[7] ,suppressingspontaneousemission ,manipulatinglight…     

加热-冷却温控系统

现代制造业中采用大型自动化进行控制，以及可重复、精确再现生产步骤，并且替代了过去各自直接的换热，不同介质之间间接加热、冷却的工序。取而代之的是在热处理工艺过程中采用换热器设备。这一工艺概念在近25年。已被西方国家广泛认可。本文将介绍换热设备的基本结构，通过与传统加热系统对比以及一些工业应用的实例。来说明换热设备的长处和不足。