排序方式: 共有32条查询结果,搜索用时 15 毫秒
1.
研究了Cr扩散阻挡层对柔性不锈钢衬底Cu(InxGa1-x)Se2(CIGS)太阳电池性能的影响.XRD和SEM分析表明,Cr阻挡层能够部分阻挡Fe等杂质从不锈钢衬底热扩散进入CIGS吸收层中,同时可以显著降低CIGS吸收层的粗糙度,提高薄膜结晶质量.从衬底扩散进入吸收层中的Fe元素以FeInSe2的形式存在,并形成FeCu等深能级缺陷,钝化了器件的性能.相同工艺条件下,在玻璃、不锈钢以及不锈钢/Cr阻挡层上所制备电池的(有效面积0.87cm2)转换效率分别为10.7%,7.95%和8.58%,不锈钢衬底电池效率的提高归因于Cr阻挡层的作用. 相似文献
2.
3.
Cu(In,Ga)Se2集成电池吸收层的三步共蒸工艺 总被引:1,自引:0,他引:1
利用三步共蒸法工艺在10cm×10cm玻璃衬底上生长出电池吸收层CuIn_(0.7)Ga_(0.3)Se_2薄膜。通过XRF和XRD谱,分析了不同预置层(Precursor)(In_(0.7)Ga_(0.3))_2Se_3生长温度下CuIn_(0.7)Ga_(0.3)Se_2薄膜的结构特性。预置层生长温度分别为300、340和400℃时,所制备的集成组件的转换效率对应为4.23%、5.16%和7.03%(测试条件为:AM1.5,1000W/cm~2)。其组件效率的提高,归因于在预置层生长温度为400℃时所制备的CuIn_(0.7)Ga_(0.3)Se_2薄膜具有良好的结构特性和组份均匀性。 相似文献
4.
CIGS薄膜(InGa)2Se3-富Cu-富In(Ga)的演变 总被引:1,自引:0,他引:1
采用三步共蒸发工艺顺序沉积铜铟镓硒(CuInGaSe2,CIGS)薄膜.薄膜的厚度、组份、晶相结构分别由台阶仪、X射线荧光光谱仪(XRF)和X射线衍射仪(XRD)来表征.在(In,Ga)2Se3预制层-富Cu相的演变过程中,依次发生以下相变:Cu(In,Ga)5Se8、Cu(In,Ga)3Se5、Cu2(In,Ga)4Se7(或Cu(In,Ga)2Se3.5)、Cu(In,Ga)Se2(液相CuxSe).在富Cu相-富In(Ga)相的演变过程中,依次发生以下相变:Cu(In,Ga)Se2(液相CuxSe)、Cu2(In,Ga)4Se7(或Cu(In,Ga)2Se3.5)、Cu(In,Ga)3Se5、Cu(In,Ga)5Se8.对这两个演变过程中薄膜的生长机理和结构特性进行了讨论. 相似文献
5.
采用热蒸发法制备铟锌锡硫(CZTSSe)薄膜。采用低 温一步 法在300℃衬底温度下制备CZTSSe薄膜;采用两步法,即在衬底温度 分别为300℃制备CZTSSe 薄膜;将衬底温度设定为480℃不变,一步蒸发沉积CZTSSe薄膜。通 过对X射线衍射(XRD)、 扫描电镜(SEM)、拉曼谱对比发现,在300℃低温下一步法和300℃ 、480℃两 步法沉积的薄膜表面粗糙,碎小晶粒较多;在480℃一步高温法制备 的薄膜表面平整, 晶粒大小均匀,3个衍射峰的半高峰宽变窄,薄膜的结晶质量得到 改善,且没有发现其它杂相的拉曼特征峰,沉积出适合作为制备CZTSSe薄膜太阳电池的 吸收层。 相似文献
6.
Cu2ZnSn(S, Se)4 (CZTSSe) thin films were deposited on flexible substrates by three evaporation processes at high temperature. The chemical compositions, microstructures and crystal phases of the CZTSSe thin films were respectively characterized by inductively coupled plasma optical emission spectrometer (ICP-OES), scanning electron microscopy (SEM), X-ray diffraction (XRD) and Raman scattering spectrum. The results show that the single-step evaporation method at high temperature yields CZTSSe thin films with nearly pure phase and high Sn-related phases. The elemental ratios of Cu/(Zn+Sn)=1.00 and Zn/Sn=1.03 are close to the characteristics of stoichiometric CZTSSe. There is the smooth and uniform crystalline at the surface and large grain size at the cross section for the films, and no other phases exist in the film by XRD and Raman shift measurement. The films are no more with the Sn-related phase deficiency. 相似文献
7.
8.
就目前国内燃用煤泥锅炉的煤泥输送、上料、给料系统作了介绍,特别对循环流化床锅炉燃用浓煤泥的输送系统作了进一步的技术经济分析。 相似文献
9.
A CuIn1-xGaxSe2 (CIGS) thin film solar cell model with MoSe2 transition layer was established, using SCAPS-1D software. The influence of MoSe2 interface layer formed between absorption layer CIGS and the back contact Mo on the solar cell performance was investigated.By changing the doping concentration,thickness and bandgap of MoSe2 layer, it is found that the MoSe2 and the variation of parameters have a significant effect on the electrical characteristics and photovoltaic parameters of CIGS thin film solar cells. Based on the energy band, the interfaces of Mo/MoSe2 and MoSe2/CIGS are analyzed. It is considered that Mo/MoSe2 is a Schottky contact, MoSe2/CIGS is an ohmic contact. When suitable parameters of MoSe2 layer are formed into the interface, it will provide a new path for designing CIGS solar cells with thinner absorption layer. 相似文献
10.
研究了Cr扩散阻挡层对柔性不锈钢衬底Cu(InxGa1-x)Se2(CIGS)太阳电池性能的影响.XRD和SEM分析表明,Cr阻挡层能够部分阻挡Fe等杂质从不锈钢衬底热扩散进入CIGS吸收层中,同时可以显著降低CIGS吸收层的粗糙度,提高薄膜结晶质量.从衬底扩散进入吸收层中的Fe元素以FeInSe2的形式存在,并形成FeCu等深能级缺陷,钝化了器件的性能.相同工艺条件下,在玻璃、不锈钢以及不锈钢/Cr阻挡层上所制备电池的(有效面积0.87cm2)转换效率分别为10.7%,7.95%和8.58%,不锈钢衬底电池效率的提高归因于Cr阻挡层的作用. 相似文献