攀钢钛白回转窑改造

详细介绍了攀钢4000t/a硫酸法钛白粉厂回转窑改造的几点经验，通过对攀钢钛业公司回转窑提质，扩能的改造，做到挖掘设备潜能，提高设备利用率，提高煅烧钛白粉质量。     

测距仪中新型的脉冲激光光源

针对现有测距仪中脉冲激光器存在寄生多脉冲的问题，提出并实现新型的采用同步泵浦声光调Q方法的测距仪用激光器、消除了寄生脉冲并提高了激光器的峰值功率。     

Spin Dependent Hopping in Ti Doped La0.67 Ca0.33 MnO3

A systematic investigation of the magnetic and transport properties of Ti doped La0.67Ca0.33MnO3 was reported. The Ti substitution for Mn ions results in a reduction in ferromagnetism and conductivity. The metal-insulator transition temperature is close to Curie temperature which decreases from 274 to 82 K as x increases from 0 to 0.17. The most important effect of Ti doping is to introduce spin clusters in the samples due to the distortion of local lattice and the inhomogeneous magnetic structure induced primarily by the random distribution of Mn ions. A maximum magnetoresistance ratio as large as 90% in 1 T at 122 K was obtained for the sample with x =0. 055, which is four times larger than that obtained for LCMO sample at 272 K. There is a remarkable field-history dependent MR in the cooling process for the doped samples while such phenomenon disappears in the warming run. The resistivity follows well the variable range hopping behavior in paramagnetic state. Both the size effect and spin dependent hopping of carriers between the spin clusters should be considered in this system.     

基于可编程逻辑阵列的RS232至RS422的串行口扩展电路

介绍了利用可编程逻辑阵列把1路RS232扩展至4路RS422的串行口电路设计方法。该扩展电路不占用PC系统资源，同时具有结构简单，使用方便，通用性和可补性强等特点，可广泛应用于主从式多机通讯系统中。     

GPRS业务模型和无线网络的研究

根据GPRS业务及业务发展情况，对GPRS业务模型进行深入研究，并对GPRS无线网络进行了更深入的探讨。     

实用化的光束质量测量系统

文中报道了一个基于ＣＣＤ和计算机的ＨＳＨ－Ｉ型光束参数及衍射极限倍数因子Ｍ＾２测量系统，对测量方法、软硬件组成和来源进行了讨论，并给出了实际测量的结果。     

中频反应溅射SiO2膜与直流溅射ITO膜的在线联镀

多数ITO透明导电玻璃生产线在实现SiO2膜与ITO膜在线联镀时，应用SiO2靶射频溅射沉积SiO2膜工艺和ITO靶直流溅射沉积ITO膜工艺，如果SiO2膜应用硅靶反应磁控溅射工艺，存在这种工艺是否可以与ITO靶直流溅射沉积ITO膜工艺在线联用以及如何实现联用的问题。作者对现有的生产线进行了改造设计、加工，做了大量实验、质谱分析和多项测试研究，成功地实现反应溅射SiO2膜与ITO膜在线联镀，做到SiO2镀膜室的工作状态的变化基本上不影响ITO镀膜室的工艺条件。     

大规格角钢在小型轧机上的试制

本文阐述了300机组利用现有设备，打破传统的蝶式孔设计方法，通过合理地选用孔型参数，在φ350轧机上成功轧制了∠80角钢，扩大了产品规格，拓宽了销售范围。