Response level crossing rate of a linear system excited by a partially specified Gaussian load process

The problem of determining the maximum mean response level crossing rate of a linear system driven by a partially specified Gaussian load process has been considered. The partial specification of the load is given only in terms of its total average energy. The critical input power spectral (PSD) function, which maximizes the mean response level crossing rate, is obtained. The critical input PSD turns out to be highly narrow-banded which fails to capture the erratic nature of the excitation. Consequently, the trade-off curve between the maximum mean response level crossing rate and the maximum disorder in the input process, quantified in terms of its entropy rate, has been generated. The method of Pareto optimization is used to tackle the conflicting objectives of the simultaneous maximization of the mean response level crossing rate and the input entropy rate. The non-linear multi-objective optimization has been carried out using a recently developed multi-criteria genetic algorithm scheme. Illustrative example of determining the critical input of an axially vibrating rod, excited by a partially specified stationary Gaussian load process, has been considered.     

Pad effects on material-removal rate in chemical-mechanical planarization

The role of a porous pad in controlling material-removal rate (MRR) during the chemical-mechanical planarization (CMP) process has been studied numerically. The numerical results are used to develop a phenomenological model that correlates the forces on each individual abrasive particle to the applied nominal pressure. The model provides a physical explanation for the experimentally observed domains of pressure-dependent MRR, where the pad deformation controls the load sharing between active-abrasive particles and direct pad-wafer contact. The predicted correlations between MRR and slurry characteristics, i.e., particle size and concentration, are in agreement with experimentally measured trends reported by Ouma¹ and Izumitani.²     

Decentralizing India's urban development

Early in 1983 the Indian Planning Commission appointed four Task Forces on Housing and Urban Development to review existing urban policies and to recommend appropriate action starting from the Seventh Plan (1985–1989). The Task Forces covered four areas of major concern: (1) urban planning, (2) urban finance, (3) urban organizations, and (4) urban shelter. They submitted their reports by the end of 1983, and taken together these constitute the most significant review of urban policy ever undertaken in India. ¹ The Task Forces had distinguished urban experts, both officials and academics, as members, with a common Member-Secretary from the Planning Commission. The common theme in all four reports is a plea for a decentralized and equitable approach towards urban development in the country.     

III–V super-lattice SPST/SPMT pin switches for THz communication: theoretical reliability and experimental feasibility studies

Microsystem Technologies - A physics-based Quantum-Modified CLassical Drift–Diffusion (QMCLDD) non-linear mathematical model has been developed for design and characterisation of GaN/AlGaN...     

ANDES: efficient evaluation of NOT-twig queries in relational databases

Despite a large body of work on XPath query processing in relational environment, systematic study of queries containing not-predicates have received little attention in the literature. Particularly, several xml supports of industrial-strength commercial rdbms fail to efficiently evaluate such queries. In this paper, we present an efficient and novel strategy to evaluate not -twig queries in a tree-unaware relational environment. not -twig queries are XPath queries with ancestor–descendant and parent–child axis and contain one or more not-predicates. We propose a novel Dewey-based encoding scheme called Andes (ANcestor Dewey-based Encoding Scheme), which enables us to efficiently filter out elements satisfying a not-predicate by comparing their ancestor group identifiers. In this approach, a set of elements under the same common ancestor at a specific level in the xml tree is assigned same ancestor group identifier. Based on this scheme, we propose a novel sql translation algorithm for not-twig query evaluation. Experiments carried out confirm that our proposed approach built on top of an off-the-shelf commercial rdbms significantly outperforms state-of-the-art relational and native approaches. We also explore the query plans selected by a commercial relational optimizer to evaluate our translated queries in different input cardinality. Such exploration further validates the performance benefits of Andes.     

Chemical composition and bond structure of carbon-nitride films deposited by CH4/N2 dielectric barrier discharge

Carbon nitride films have been deposited by dielectric barrier discharge with a CH₄/N₂ gas mixture at different conditions. Fourier Transform Infrared (FTIR) spectroscopy, X-ray photo electron spectroscopy (XPS), Raman spectroscopy, Atomic force microscopy (AFM) and ellipsometry were used to systematically study chemical composition, bond structure and surface morphology of deposited films. Various bonds between carbon, nitrogen, hydrogen, and also oxygen were observed.     

Optimization of a Hetero-Structure Vertical Tunnel FET for Enhanced Electrical Performance and Effects of Temperature Variation on RF/Linearity Parameters

Silicon - A new hetero-structure vertical tunnel field effect transistor is proposed and investigated using Sentaurus Technology Computer-aided Design simulation. Since the direction of the gate...     

Small amphiphilic organics, coordination extended solids, and constant curvature structures

In this Account, we explore the role constant curvature structures play in amphiphilic small molecule crystals and extended coordination solids. A constant curvature structure is one in which there is a surface or interface that has the same curvature throughout its surface. Simple examples of such structures contain spheres (micelles), columns, or layers. Yet another family are cubic as is found in the gyroid topology. For amphiphilic systems, there are two domains, one generally hydrophobic and the other hydrophilic. We find that the interfaces between these two domains in small molecule structures resemble those in larger scale systems and adopt topologies related to constant curvature structures. The hydrophobic-to-total volume ratio, a molecular parameter, can be used to predict which type of constant curvature structure is adopted. In the case of three coordinate extended solids, constant curvature plays a role both in the extended net topology and in the hydrophobic-to-hydrophilic interface.     

Preparation and characterization of low-halogen and nonhalgoen fire-resistant low-smoke (FRLS) cable sheathing compound from blends of functionalized polyolefins and PVC

An attempt is made to develop a novel series of cable sheathing compounds with variation in chlorine content and sufficient fire retardance and unique low-smoke characteristics. These are prepared by blending PVC and functionalized polyolefins in different compositions. PE and EPDM have been functionalized by grafting dibutyl maleate (DBM) using DCP as initiator. FRLS compounds made from PVC-functionalized polyolefin blends possess the special characteristics of low-smoke, low-acid-gas generation, increased fire retardance, and improved volume resistivity, which are much better in comparison with a typical PVC sheathing compound. Thermoplastic elastomer (TPE) based nonhalogen FRLS compounds are also reported. The mechanisms for grafting, polymer-polymer and polymer-filler interactions have been presented.     

Influence of ZnO nanoparticles on the cure characteristics and mechanical properties of carboxylated nitrile rubber

Zinc oxide (ZnO) nanoparticles assembled in one dimension to give rod‐shaped morphology were synthesized. The effect of these ZnO nanoparticles (average particle size ～ 50 nm) as the curing agent for carboxylated nitrile rubber was studied with special attention to cure characteristics, mechanical properties, dynamic mechanical properties, and swelling. These results were compared with those of the conventional rubber grade ZnO. The study confirmed that the ZnO nanoparticles gave a better state of cure and higher maximum torque with a marginal decrease in optimum cure time and scorch time. The mechanical properties also showed an improvement. There was an increase in tensile strength by ～ 120%, elongation at break by ～ 20%, and modulus at 300% elongation by ～ 30% for the vulcanizate cured with ZnO nanoparticles, as compared with the one containing rubber grade ZnO. Dynamic mechanical analysis revealed that the vulcanizates exhibited two transitions—one occurring at lower temperature due to the T_g of the polymer, while the second at higher temperature corresponding to the hard phase arising due to the ionic structures. The second transition showed a peak broadening because of an increase in the points of interaction of ZnO nanoparticles with the matrix. The tan δ peak showed a shift towards higher T_g in the case of ZnO nanoparticle‐cured vulcanizate, indicating higher crosslinking density. This was further confirmed by volume fraction of rubber in the swollen gel and infrared spectroscopic studies. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007