Removal of lead(Pb(Ⅱ))and zinc(Zn(Ⅱ))from aqueous solution using coal fly ash(CFA)as a dual-sites adsorbent

Coal fly ash(CFA)is composed of minerals containing some oxides in crystalline phase(i.e.,quartz and mullite),as well as unburned carbon as mesoporous material,thus enabling CFA to act as a dual-sites adsorbent with unique properties.This work focused on the adsorption of Pb(Ⅱ)and Zn(Ⅱ)from binary system,a mixture containing two metal ion solutions present simultaneously,onto NaOH-modified CFA(MCFA).Several adsorption tests were conducted to evaluate the effect of several parameters,includ-ing pH and contact times.The experiment results indicated that chemical treatment of CFA with NaOH increased pore volume from 0.021 to 0.223 cm3 g-1.In addition,it could also enhance the availability of functional groups on both minerals and unburned carbon,resulting in almost 100％Pb(Ⅱ)and 97％Zn(Ⅱ)adsorbed.The optimum pH for adsorption system was pH=3 and quasi-equilibrium occurred in 240 minutes.Equilibrium data from the experimental results were analyzed using Modified Extended Langmuir(MEL)and Competitive Adsorption Langmuir-Langmuir(CALL)isotherm models.The analysis results showed that the CALL isotherm model could better describe the Pb(Ⅱ)and Zn(Ⅱ)adsorption pro-cess onto MCFA in binary system compared with MEL isotherm model.     

Nanoindentation Creep,Nano-Impact,and Thermal Properties of Multiwall Carbon Nanotubes–Polypropylene Nanocomposites Prepared via Melt Blending

Morphological analysis of the nanocomposites showed that multi-wall carbon nanotubes were uniformly distributed in polypropylene. Nanoindentation creep and nano-impact tests were carried out. Several equations/models were used to analyze creep data. From creep test, hardness of the nanocomposites increased by 18 and 36% for C150P and C70P, respectively, compared to polypropylene, whereas elasticity also increased by 20 and 34%. From nano-impact test, hardness of the nanocomposites was also higher than that of neat polypropylene. However, hardness (dynamic/impact) values were slightly higher than the (quasi-static) hardness resulted from creep test. In addition, degree of crystallinity of nanocomposites also increased by 12.6 and 14.3%.     

Significance of Acoustic and Hydrodynamic Cavitations in Enhancing Ozone Mass Transfer

Assessment of both acoustic and hydrodynamic cavitations for intensifying ozone mass transfer was conducted simultaneously. Four process schemes were arranged to evaluate the effect of application of each kind of cavitation as well as both of them, on the ozone mass transfer process. All processes were conducted at pH of 3 to avoid ozone natural self-decomposition initiated by hydroxide ions (OH^?). The chemical and mechanical effects of cavitation were distinguished by using radical scavengers to suppress radical formation. The result showed that hydrodynamic and acoustic cavitations enhanced ozone mass transfer synergistically. The enhancement obtained from the acoustic cavitation was higher than that obtained from the hydrodynamic cavitation, and the chemical effects of cavitation were much significant than that of mechanical effects. The enhancement obtained due to chemical effects of cavitation was about twice the enhancement obtained due to mechanical effects when only one type of cavitation was combined with ozonation. Combination of both type of cavitation and ozonation gave the enhancement obtained due to chemical effect of 3.68 times that obtained due to mechanical effects.     

Characterization of hyacinth bean (Lablab purpureus (L.) sweet) seeds from Indonesia and their protein isolate

Hyacinth bean (Lablab purpureus (L.) sweet) seeds from Indonesia were characterized for the purposes of usage as a protein source. Protein isolate was prepared from the seeds using an isoelectric method, which was also used to characterize the physicochemical and functional properties. Hyacinth bean seeds have a moderate concentration of protein (17.1 ± 1.5%), and low concentration of HCN (1.1 ± 0.1 mg/100 g). However, before using the seeds as food, some treatments are needed to reduce their anti-nutritional factors, since the contents of trypsin inhibitor and phytate are 0.15 ± 0.02 TIU/mg and 18.9 ± 0.2 mg/g, respectively. Using the isoelectric preparation, the yield of protein isolate was low (7.38 ± 0.2 g per 100 g of the seeds), but the protein isolate had good colour, neutral odour, high protein content (89.8 ± 0.82%), and low ash (2.97 ± 0.36%). The protein isolate also had good functional properties, such as solubility, foaming capacity, and emulsifying activity. However, the foaming and emulsifying stabilities were low.     

Morphological,thermal, rheological,and mechanical properties of polypropylene-nanoclay composites prepared from masterbatch in a twin screw extruder

A commercial homopolymer polypropylene was melt blended with commercial nanoclay masterbatch at different concentrations of nanoclay using twin screw extruder (TSE). The influence of three different concentrations (5, 10, and 15 wt%) of the nanoclay on the morphological, thermal, rheological, and mechanical properties was investigated. The morphology of the nanocomposites was characterized using Scanning Electron Microscope (SEM), whereas, the thermal behavior (e.g., melting and crystallization) was characterized using Differential Scanning Calorimetry (DSC). The melt rheology and dynamic mechanical properties were analyzed using a torsional rheometer. Additionally, the tensile properties were characterized as well. The morphological analysis showed that the nanoclay was well distributed in the PP matrix as indicated by the SEM micrographs. The DSC results showed that the presence of nanoclay in the PP matrix increased the degree of crystallinity of PP-nanoclay composites, which reached a maximum at 5 wt% of nanoclay concentration. However, the melting temperature of the PP-nanoclay composites was not affected by the presence of nanoclay particles. In addition, rheological analysis showed that the melt response gradually changed from pseudo-liquid like to pseudo-solid like as the nanoclay concentration increased. Moreover, the storage modulus (G′) increased by increasing nanoclay content. Furthermore, tensile test results showed that the addition of nanoclay leads to a significant enhancement in the mechanical properties of the PP nanocomposites.     

Tailoring cotton fabric with wettability gradient and anisotropic penetration of liquid by spray coating

Abstract

Comfort has been one of the most important features of clothing, particularly for sportswear, which requires an effective transport of heat and moisture from the inner to the outer side of clothing. We herein report the use of a simple technique of spray coating and commercially available water repellents for a one-sided hydrophobic and self-initiated one-way water transport cotton fabric. The highlight of this work is the simplicity of the process and choice of chemicals that can be adopted easily by any textile finishing industry. On this fabric, water was able to diffuse and penetrate the fabric structure in one direction from the hydrophobic to the hydrophilic side but was unable to go the opposite direction. The directional transport improved with smaller droplets and lower add-on achievable by higher air pressure and longer distance of spray coating. From moisture management tests, the best result was obtained with the spray coating of Phobol NB-NH at an air pressure of 3.0?kgf/cm² and a distance of 120?cm. Phobol NB-NH gave better result of transport and overall comfort properties than Phobotex RSY.     

A new denoising method for removing salt & pepper noise from image

Multimedia Tools and Applications - Digital image has a significant importance in many fields in human life such as, in medicine, photography, biology, astronomy, industry and defense. Thus, it...     

Polypropylene/multiwall carbon nanotubes nanocomposites: Nanoindentation,dynamic mechanical,and electrical properties

Polypropylene (PP)/Multiwall carbon nanotubes (MWCNTs) nanocomposites were fabricated via melt compounding that utilizes a corotating twin‐screw extruder. Two commercially available MWCNTs, Baytubes C150P and C70P, were incorporated into PP matrix at concentration of 3 wt %. The nanocomposites samples were analyzed using scanning electron microscopy, dynamic mechanical analysis (DMA), nanoindentation test, and picoammeter. It was found that both MWCNTs types were well distributed and dispersed in the PP matrix and no agglomeration of MWCNTs was observed. The DMA analysis results showed that the incorporation of MWCNTs enhanced the storage modulus and thermal stability of the PP matrix. Whereas, nanoindentation creep results showed that the creep rate and displacement of the PP/MWCNTs nanocomposites was lower than the neat PP, in which C70P < C150P < PP. The reduction of creep rate and creep displacement was associated to the improvement of creep resistance. There were also improvements on hardness and stiffness of the nanocomposites. Additionally, the electrical resistivity of the neat PP decreased with the incorporation of MWCNTs. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45293.     

Passive direct methanol fuel cells for portable electronic devices

Due to the increasing demand for electricity, clean, renewable energy resources must be developed. Thus, the objective of the present study was to develop a passive direct methanol fuel cell (DMFC) for portable electronic devices. The power output of six dual DMFCs connected in series with an active area of 4 cm² was approximately 600 mW, and the power density of the DMFCs was 25 mW cm⁻². The DMFCs were evaluated as a power source for mobile phone chargers and media players. The results indicated that the open circuit voltage of the DMFC was between 6.0 V and 6.5 V, and the voltage under operating conditions was 4.0 V. The fuel cell was tested on a variety of cell phone chargers, media players and PDAs. The cost of energy consumption by the proposed DMFC was estimated to be USD 20 W⁻¹, and the cost of methanol is USD 4 kW h. Alternatively, the local conventional electricity tariff is USD 2 kW h. However, for the large-scale production of electronic devices, the cost of methanol will be significantly lower. Moreover, the electricity tariff is expected to increase due to the constraints of fossil fuel resources and pollution. As a result, DMFCs will become competitive with conventional power sources.