A concise process technology for 3-D suspended radio frequency micro-inductors on silicon substrate

In this letter, a concise process technology is proposed for the first time to enable the fabrication of good quality three-dimensional (3-D) suspended radio frequency (RF) micro-inductors on bulk silicon, without utilizing the lithography process on sidewall and trench-bottom patterning. Samples were fabricated to demonstrate the applicability of the proposed process technology.     

Influence of weld misalignment and weld metal overmatch on the prediction of fracture in pipeline girth welds

$\text{J-}\text{integral}$ estimates using elastic-plastic finite element calculations, are shown to compare well with experimental results from single edge-notch bend (SENB) specimens made of X483 grade line pipe steel.The influence of weld misalignment and weld metal overmatch on fracture of cracked girth welds is predicted, also using elastic-plastic finite element calculations. Weld metal overmatch reduces plastic strain levels in the weld and appears beneficial in reducing $\text{J-}\text{integral}$ magnitudes. Predicted values of $\text{J-}\text{integral}$ are shown to increase with weld misalignment. However, $\text{J-}\text{integral}$ magnitudes near the critical value for crack growth initiation were only attained after considerable plastic straining at or near limit load. This result suggests that limit load calculations may be more appropriate for prediction of failure of cracked girth welds than conventional fracture techniques.     

MRT of experimental liver abscesses: a comparison of a new blood pool contrast medium with gadolinium-DTPA in animal experiments

PURPOSE: In an experimental pyogenic liver abscess model, the signal intensities were compared intraindividually and interindividually after the application of a new blood pool contrast agent, 24-gadolinium-DTPA (diethylenetriamine-pentaacetic acid) cascade polymer, and after the application of gadopentetate dimeglumine. METHODS: In 20 rabbits with experimentally induced liver abscesses, the relative signal intensities of the liver, abscess centre, abscess wall and portal vein were assessed before and between 30 seconds and 60 minutes after injection of a 25 mumol/kg dose of gadolinium polymer and of 100 mumol/kg of gadolinium-DTPA, respectively. Measurements were performed at 1.5 Tesla, using a head coil and a Flash-2-D sequence. RESULTS: The interindividual comparison (unpaired T-test, p < 0.05) yielded significant differences of the relative signal intensities of the abscess centre (at any time point after contrast-media application), abscess wall (between 15 and 60 minutes after contrast media application), and portal vein (between 30 seconds and 7.5 minutes after contrast media application). The interindividual comparison showed a significantly higher abscess centre-liver contrast (between 30 seconds and 12.5 minutes after contrast media application) and a significantly higher abscess wall-centre contrast (between two and 7.5 minutes after contrast media application) after the application of gadolinium polymer compared with gadopentetate dimeglumine. CONCLUSION: In this animal model, the higher abscess centre-liver contrast after the application of gadolinium polymer was the basis for a better and prolonged visibility of the abscesses, as compared with images acquired after injection of gadopentetate dimeglumine.     

Interactions in compatible polymer systems

Summary Dynamic mechanical measurements on polystyrene — poly(vinylmethylether) blends are demonstrating that the relaxation processes in the blends are mainly connected with the motions of the poly(vinylmethylether) chain.Concerning the effect of mixing on topological properties of the blends, an increase of the polydispersity of the relaxation processes is detected in blends with high molecular weight polystyrene while low molecular weight polystyrene exerts an effect of dilution upon the relaxation of the high molecular poly(vinylmethylether) chains.From these measurements as well as from thermoanalytical data it results that the energetic interaction is more pronounced in the blends with oligomeric than with high molecular weight polystyrene. The glass transition temperature shows a larger deviation from additivity for blends with high molecular polystyrene than for those with oligomeric polystyrene.Herrn Prof. Dr. M. Kryszewski zum 60. Geburtstag herzlichst gewidmet     

Natrium-Aluminium-Silicate - Eigenschaften und Anwendungen

Sodium Aluminium Silicates - Properties and Application Sodium aluminium silicates in amorphous and crystalline form are used since many years in various technical processes. The crystalline sodium aluminium silicates, e. g. zeolites, belong to the group of structured silicates and are known for their reversible water uptake and alkaline earth exchange properties. Recently, sodium aluminium silicates have gained considerable importance since their cation exchanging ability can be utilized in washing agents for the removal of undesirable hardness of water. Thus, the polyphosphates used in washing agents can possibly be substituted. Zeolites can be supplied to the detergent industry in the form of powder or suspension. Production of the powder by spray drying does not involve special problems. Incorporation of the powder into the slurry of the detergent appears to be an anachronism from the viewpoint of energy saving. Optimization work on suspensions of zeolite yielded stable products with 45 to 48% zeolite content. The theory of critical particle concentration was applied in this work.     

On detecting co-resident cloud instances using network flow watermarking techniques

Virtualization is the cornerstone of the developing third-party compute industry, allowing cloud providers to instantiate multiple virtual machines (VMs) on a single set of physical resources. Customers utilize cloud resources alongside unknown and untrusted parties, creating the co-resident threat—unless perfect isolation is provided by the virtual hypervisor, there exists the possibility for unauthorized access to sensitive customer information through the exploitation of covert side channels. This paper presents co-resident watermarking, a traffic analysis attack that allows a malicious co-resident VM to inject a watermark signature into the network flow of a target instance. This watermark can be used to exfiltrate and broadcast co-residency data from the physical machine, compromising isolation without reliance on internal side channels. As a result, our approach is difficult to defend against without costly underutilization of the physical machine. We evaluate co-resident watermarkingunder a large variety of conditions, system loads and hardware configurations, from a local laboratory environment to production cloud environments (Futuregrid and the University of Oregon’s ACISS). We demonstrate the ability to initiate a covert channel of 4 bits per second, and we can confirm co-residency with a target VM instance in $<$ 10 s. We also show that passive load measurement of the target and subsequent behavior profiling is possible with this attack. We go on to consider the detectability of co-resident watermarking, extending our scheme to create a subtler watermarking attack by imitating legitimate cloud customer behavior. Our investigation demonstrates the need for the careful design of hardware to be used in the cloud.     

Numerical simulation of non-linear chatter vibration in turning

In this paper, basic relationships and algorithms for numerical simulation of non-linear, self-excited vibrations in single degree-of-freedom cutting systems are presented. Non-linearities due to the tool leaving the cut, as well as interference between the cutting tool clearance face and cutting surface waviness, were taken into consideration. Examples of vibration simulation results are shown.