Impact behavior of aminosilane functionalized nanosilica based shear thickening fluid impregnated Kevlar fabrics

In the present work, two types of shear thickening fluids have been synthesized by using neat and aminosilane functionalized silica nanoparticles and their viscosity curves have been obtained by the rheometer. Based on the values of peak viscosity of synthesized shear thickening fluids, the surface functionalized nanosilica based shear thickening fluid has been chosen as a best candidate due to the high viscosity for impregnation into the neat Kevlar of different layers viz. four (04) and eight (08) layers for velocity impact study. The experimental investigations reveal high energy absorption of shear thickening fluid impregnated Kevlar as compared to the neat Kevlar. The maximum energy absorption 62 J is achieved corresponding to the initial velocity 154 m∙s⁻¹ for 08 layers shear thickening fluid impregnated Kevlar specimen. The data have also been analytically determined and validated with the experimental data. The experimental data have good agreement with the analytical data within the accuracy of around 15 to 20%. The present findings can have significant inferences towards the fabrication of shear thickening fluids using nanomaterials for numerous applications such as soft armors, dampers, nanofinishing and so forth.     

Control of calcium hexaluminate grain morphology in in-situ toughened ceramic composites

The influence of processing conditions on the morphology of calcium hexaluminate (CA₆) grains in Al₂O₃: 30 vol% CaO·6Al₂O₃ (CA₆) ceramic composites was investigated. Specimens were prepared by in-situ reaction sintering using precursor powders of alumina, and either calcium carbonate or calcium oxide. In some samples, 1 vol% anorthite glass was added as a sintering aid. X-ray diffraction was used to study the phase development in the as-calcined and sintered states. The resultant microstructures were characterized using both scanning electron microscopy (SEM), and imaging secondary ion mass spectrometry (SIMS). It was found that the CA₆ grains developed a platelike morphology when CaCO₃ was used as the starting calcium-rich powder. In contrast, samples prepared using CaO resulted in equiaxed CA₆ grains. This result was observed to be independent of the anorthite glass addition. The findings are rationalized in terms of distinct CA₆ reaction mechanisms, resulting from differences in the reactivity of the powders during the early stages of calcining.Cement Nomenclature C CaO - A Al₂O₃     

Instability due to Viscosity Stratification Downstream of a Centerline Injector

A common injector geometry upstream of a static mixer is the centerline injector. A flow instability can arise due to viscosity differences between the injected core‐flow and the outer co‐flow. This instability can adversely affect the effectiveness of the mixing operation. An experimental investigation of miscible viscosity‐stratified flow in a circular geometry was performed using Laser Induced Fluorescence (LIF) and Particle Image Velocimetry (PIV). The experimental results for the stable region agree with the analytical results. The unstable region exhibits different modes depending on the viscosity ratio, volume flux ratio, and Reynolds number. The modes include wavy core‐flow with fissures and wavy core‐flow with core breakup. The time‐averaged experiment velocity profiles for the unstable core indicate a broadening of the jet at the centerline, which is consistent with the LIF visualization.     

Characterization of in Vitro Transdermal Iontophoretic Delivery of Insulin

In-vitro studies were conducted to characterize the transdermal iontophoretic delivery of insulin, thus avoiding potential complications from various biological variations, which may be encountered during in-vivo studies. The proteolytic degradation of insulin in skin homogenates and degradation under the experimental conditions used was investigated. Appropriate adjuvants were incorporated to minimize the potential degradation problems of insulin. ¹²⁵I-Insulin was observed to penetrate into and accumulate in the skin during the iontophoresis period. It was then released gradually from this depot, as a mixture of intact and ¹²⁵-I labelled fragments, into the receptor medium. Drug desorption studies supported the theory of skin depot or reservoir formation. It was found that an electric field could be used to facilitate the desorption of drug from the depot. The post-application flux of insulin (or its fragments) from the skin depot formed during iontophoresis was monitored to study the factors affecting the iontophoretic delivery of insulin. Stripping and delipidization of the skin were noted to increase the skin permeation rate of insulin. The cumulative radioactivity permeated and accumulated in the skin was higher at pH 3.6 than at pH 7.4. The iontophoresis-facilitated transdermal delivery was observed to increase with increasing duration of current application and increasing donor concentration of insulin. Modulation of drug delivery by multiple applications was also found to be feasible.     

Synthesis and characterization of acidic properties of Al-SBA-15 materials with varying Si/Al ratios

Al-SBA-15 of varying Si/Al ratios in the range 11.4–78.4 was synthesized using tri-block copolymer P123. The calcined materials were examined by XRD, pore size distribution, surface area, ²⁷Al NMR spectroscopy. The acidity and acid strength distribution were studied using microcalorimetric adsorption of NH₃. The acidic properties were also examined by cumene cracking reaction as a function of Si/Al ratios. Systematic variation of acidity and activity was observed as a function of Si/Al ratio. The initial heats of NH₃ adsorption correlated well with activity indicate that acid sites with ΔH > 100 kJ/mole is responsible for cumene cracking activity. Linear correlations were obtained with total acidity and cumene cracking activities. The tetrahedral aluminum was found to be responsible for the observed acidities and catalytic activities.     

Plumbagin,a Biomolecule with (Anti)Osteoclastic Properties

Plumbagin is a plant-derived naphthoquinone that is widely used in traditional Asian medicine due to its anti-inflammatory and anti-microbial properties. Additionally, plumbagin is cytotoxic for cancer cells due to its ability to trigger reactive oxygen species (ROS) formation and subsequent apoptosis. Since it was reported that plumbagin may inhibit the differentiation of bone resorbing osteoclasts in cancer-related models, we wanted to elucidate whether plumbagin interferes with cytokine-induced osteoclastogenesis. Using C57BL/6 mice, we unexpectedly found that plumbagin treatment enhanced osteoclast formation and that this effect was most pronounced when cells were pre-treated for 24 h with plumbagin before subsequent M-CSF/RANKL stimulation. Plumbagin caused a fast induction of NFATc1 signalling and mTOR-dependent activation of p70S6 kinase which resulted in the initiation of protein translation. In line with this finding, we observed an increase in RANK surface expression after Plumbagin stimulation that enhanced the responsiveness for subsequent RANKL treatment. However, in Balb/c mice and Balb/c-derived RAW264.7 macrophages, these findings could not be corroborated and osteoclastogenesis was inhibited. Our results suggest that the effects of plumbagin depend on the model system used and can therefore either trigger or inhibit osteoclast formation.     

Optimization of reactive SMB and Varicol systems

A comprehensive optimization study on a simulated moving bed reactor (SMBR) system is reported in this article for the direct synthesis of methyl tertiary butyl ether (MTBE) from tertiary butyl alcohol (TBA) and methanol. The applicability of the Varicol process, which is based on non-synchronous shift of the inlet and outlet ports, is explored for the first time for a reactive system. Multi-objective (two and three objective functions) optimization has been performed for both existing as well as design stage for SMBR and Varicol systems and their efficiencies are compared. The optimization problem involves relatively large number of decision variables; both continuous variables, such as flow rates in various sections and length of the columns and discrete variables, such as number of columns and column configuration. Pareto optimal solutions are obtained. It is observed that a five-column Varicol performs better than an equivalent five-column SMBR and its performance is nearly equal to that of a six-column SMBR in terms of purity and yield of MTBE and minimal eluent consumption. This is an important inference as it enables the reduction of fixed and operating costs while at the same time helps to achieve high purity and yield of the desired product and conversion of the limiting reactant. A state-of-the-art optimization technique, viz., non-dominated sorting genetic algorithm (NSGA), which allows handling of these complex optimization problems, is employed for this study. This is the first time that, not only the separating potential of Varicol has been extended to reaction systems, but also was optimized for multiple objectives.