Processing of Yttria-Alumina Coated Silicon Nitride Slips by Slip Casting

Si₃N₄powders coated with 6 wt% Y₂O₃and 4 wt% Al₂O₃were prepared by coprecipitation. The resulting powders were dispersed in water at different pH values and with addition of various amounts of ammonium polyacrylate (NH₄PA) to produce 32 vol% slips. The influence of the amount of NH₄PA solution added and pH on the rheological properties of 32 vol% coated Si₃N₄slips were studied. In addition, the sintered density of cast samples was determined and related to the degree of slip dispersion. The adsorption of the NH₄PA on the coated particle surface was rather high and the surface became saturated near 0.86 mg/m²at pH 9.2. High NH₄PA concentrations (1.7–3 wt%) were necessary to obtain well dispersed 32 vol% coated Si₃N₄slips at pH 9.2. The best stabilization was obtained with the addition of 2.3 wt% NH₄PA; in this condition, the viscosity reached a minimum value of 35 mPa.s at 100 s^–1. The slip viscosity increased with increasing pH from 9.2 to 10.2. Slips with low viscosities gave a more dense packing of cast samples and consequently higher sintered density values.     

The bone marrow in murine AIDS

In order to increase the understanding of blood cytopenias in HIV infection we have investigated the bone marrow in murine AIDS. C57BL/6 mice infected with the LP-BM5 retrovirus show a decrease in cellularity, numerous haemophagocytic histiocytes, a reduction of all erythroid precursor cells, an increase in eosinophil number and an increase in lymphocytes. Immunostaining with an anti-Pr60gag antibody shows that the majority of bone marrow cells express the viral protein. Thus, the bone marrow in MAIDS has many similarities with the bone marrow from patients with advanced AIDS and may prove useful as a model for therapy aimed at treating blood cytopenias.     

Application of Romero García method to the degradation process of DGEBA/ETDA filled with ultra fine metallic copper

Summary The thermal properties of an epoxy resin (diglycidyl ether Bisphenol A, DGEBA) cured with a primary amine (ethylenediamine, ETDA) and filled with 10, 20 and 30 wt. % of ultra fine copper particles were analyzed. The thermal results were evaluated by means of the Romero-Garcia method, which allowed to obtain the resin degradation kinetic parameters, as well as the possible decomposition mechanism. From the obtained results is possible to infer that higger copper content strongly affects the degradation process of the epoxy resin, which causes a drop off on the composites thermal stability. This behavior could be attributed to water presence, being this effect less pronounced for the resin with 10 wt. % copper and unfilled resin. Regarding to decomposition mechanism, three way transport showed the best correlation for all samples.     

Aqueous tape casting of yttria stabilized zirconia

Tape casting process was used to produce yttria stabilized zirconia (YSZ) substrates in an aqueous system with poly(vinylalcohol) (PVA) and glycerine as binder and plasticizer, respectively. Various compositions of YSZ slips with different amounts of PVA and glycerine and consequently different solid/liquid ratios were prepared. The influence of the slip composition on the rheological properties of the slips was studied. In addition, the effect of the slip composition on the properties of the green and sintered tapes was investigated. PVA and glycerine did not affect the dispersion properties of the YSZ powder. Glycerine additions enhanced the flexibility of the green tapes but also produced a decrease in the tensile strength. The increase in the PVA content increased the tensile strength but resulted in a markedly decrease in the green density of the tapes. A correlation between the green and sintered density was found. The anisotropic sintering shrinkage parallel and perpendicular to the casting direction increased with increasing the PVA content. The slip compositions with 5 wt% PVA produced green tapes with satisfactory tensile strength. They had the highest sintered density, the lower sintering shrinkage and the lesser shrinkage anisotropy.     

EGF/EGF-R system and benign breast disease during and following the treatment of gynaecological pathologies with an analogue of LH-RH

Clinical and pathological changes of the mammary gland have been studied in 64 women affected by symptomatic Benign Breast Disease (BBD) coexisting with endometriosis or uterine leiomyomata. These patients were rendered hypoestrogenic by subcutaneous administration of the LH-RH analogue Goserelin depot [D-ser (tBu)6 Aza-Gly10-GnRH (ICI118630)] performed every 28 days, for six months. They were evaluated clinically and ultrasonographically before and after treatment to find possible changes of BBD as well as of endometriosis or uterine leiomyomata. Mammary biopsies were performed before and after treatment in all the patients to study the changes of EGF-R expression. Results showed that clinical improvement is accompanied with a reduction of EGF-R expression.     

Hormonal profile during the follicular phase in cycles stimulated with a combination of human menopausal gonadotrophin and gonadotrophin-releasing hormone antagonist (Cetrorelix)

A third generation gonadotrophin-releasing hormone antagonist (Cetrorelix) was used during ovarian stimulation in 32 patients undergoing assisted reproduction, in order to prevent the premature luteinizing hormone (LH) surge. In all patients, ovarian stimulation was carried out with two or three ampoules of human menopausal gonadotrophin (HMG), starting on day 2 of the menstrual cycle. In addition, 0.5 mg of Cetrorelix was administered daily from day 6 of HMG treatment until the day of ovulation induction by human chorionic gonadotrophin (HCG). A significant drop in plasma LH concentration was observed within a few hours of the first administration of Cetrorelix (P < 0.005). Moreover, no LH surge was detected at any point in the treatment period in any of the 32 patients. A mean oestradiol concentration of 2111 +/- 935 ng/l was observed on the day of the HCG administration, indicating normal folliculogenesis. Like LH, progesterone concentration also dropped within a few hours of the first administration of Cetrorelix (P < 0.005). A 0.5 mg daily dose of Cetrorelix prevented a premature LH surge in all the 32 patients treated.     

English teaching in the Italian medical faculties: results of a survey

BACKGROUND: Although a compulsory examination in medical English has been present in the medical degree curriculum in Italy since 1990, guidelines indicating what should be learnt and suggesting some means of overcoming the various problems this entails are still lacking. OBJECTIVE: To investigate the main features of teaching English in the Medical Faculties and enquire into how the various problems are solved in the individual English teaching units. METHOD: A questionnaire addressing the above issues was sent out to all the Italian Universities with a Medical Faculty. RESULTS: The first finding of our survey was that response was very poor: less than 30% of the survey volunteered any reply. Within the very reduced sample which responded, there was a high degree of variation among the solutions adopted, although the underlying problems were perceived to be much the same throughout Italy. CONCLUSIONS: The general objective of the English course for medicine should be more precisely defined, together with a series of specific minimum skills the student should possess to pass the final examination. A closer collaboration among the English teaching units might help to standardize these requirements, improve the quality of the teaching and hence the level of proficiency in English for the specific purpose of medical practice.     

Gate‐level body biasing for subthreshold logic circuits: analytical modeling and design guidelines

Gate‐level body biasing provides an attractive solution to increase speed and robustness against process and temperature variations while maintaining energy efficiency. In this paper, the behavior of basic logic gates, designed according to the proposed design technique, is analytically examined with the main purpose of furnishing important guidelines to design efficient subthreshold digital circuits. Our modeling has been fully validated by comparing the predicted results with SPICE simulations performed for a commercial 45‐nm complementary metal oxide semiconductor technology. Considering process, temperature and loading capacitance variations, the delay of an inverter is predicted with a maximum error lower than 16.5%. Even better results are obtained when our modeling is applied to more complex logic gates. Under process, loading capacitance and temperature variations, the delay of NAND2 and NOR2 logic gates is always predicted with an error below 10%. Good agreement between the predicted and simulated results makes our modeling a valuable support during the circuit design phase. Copyright © 2014 John Wiley & Sons, Ltd.     

Colloidal processing of Al2O3-doped zirconia ceramics with CaO–P2O5–SiO2 glass as additive

Well-dispersed concentrated aqueous suspensions of Al₂O₃-doped Y-TZP (AY-TZP), AY-TZP with 5.4 vol% of CaO–P₂O₅–SiO₂ (CaPSi) glass (AY-TZP5) and 10.5 vol% CaPSi glass (AY-TZP10), with ammonium polyacrylate (NH₄PA) dispersant were prepared to produce slip cast compacts. The rheological properties of 35 and 40 vol% slips were studied. The densification, microstructure as well as hardness and fracture toughness were investigated as a function of CaPSi glass content at 1300°C-1500°C. The optimum NH₄PA concentration of 35 vol% AY-TZP5 and AY-TZP10 slips at pH ~9 was found to be about 43% and 67% greater than that of AY-TZP slips; this behavior was related to the greater amounts of Ca²⁺ ions leached out from the CaPSi glass surface. The viscosity of stabilized 40 vol% slips with NH₄PA attained a minimum value at 5.4 vol% CaPSi glass addition, and resulted in a more dense packing of cast samples. AY-TZP5 can be sintered at a lower temperature (1300°C) compared to that of AY-TZP. AY-TZP5 exhibited a fine microstructure of tetragonal ZrO₂ (grain sizes below 0.3 µm), and ZrSiO₄–Ca₂P₂O₇ particles homogeneously distributed within the zirconia matrix. It presented similar fracture toughness and a slightly lower hardness compared to those of AY-TZP.     

High-temperature tribological properties of CrAlN, CrAlSiN and AlCrSiN coatings

Cr-Al-Si-N coatings with high and low Cr/Al ratios (CrAlSiN and AlCrSiN, respectively) were deposited on WC substrates by cathodic arc and compared with a reference Cr-Al-N coating. The silicon content was close to 3 at.%. X-ray diffraction analysis showed that CrAlN and CrAlSiN coatings exhibited the cubic Cr(Al)N structure, whereas in AlCrSiN a mixture of cubic Cr(Al)N and wurtzite-type AlN was identified. All three coatings showed excellent thermal stability and oxidation resistance up to 800 °C. The tribological properties were evaluated by ball-on-disk tribometer in the temperature range 25-600 °C. Two materials were used as counterparts: alumina and 440C steel. Sliding against 440C steel balls led to the extensive wear of the balls and transfer of the ball material to the surface of the coatings. The coatings were not damaged. When sliding against alumina balls, the coating wear was low up to testing temperature 300 °C. At 400 °C, CrAlSiN coating was partially worn through. CrAlN and AlCrSiN coatings were almost immediately worn out at 600 °C. The analysis of the wear debris identified high-temperature adhesive failure of the coatings.