Piezoelectric properties of PVDF-conjugated polymer nanofibers

This study presents the development and characterization of PVDF-conjugated polymer nanofiber-based systems. Five different conducting polymers (CPs) were synthesized successfully and used to create the nanofiber systems. The CPs used are polyaniline (PANI), polypyrrole (PPY), polyindole (PIN), polyanthranilic acid (PANA), and polycarbazole (PCZ). Nanofiber systems were produced utilizing the Forcespinning® technique. The nanofiber systems were developed by mechanical stretching. No electrical field or post-process poling was used in the nanofiber systems. The morphology, structure, electrochemical and piezoelectric performance was characterized. All of the nanofiber PVDF/CP systems displayed higher piezoelectric performance than the fine fiber PVDF systems. The PVDF/PPY nanofiber system displays the highest piezoelectric performance of 15.56 V. The piezoelectric performance of the PVDF/CP nanofiber systems favors potential for an attractive source of energy where highly flexible membranes could be used in power actuators, sensors and portable, and wireless devices to mention some.     

Cheese fortification using saturated monoglyceride self‐assembly structures as carrier of omega‐3 fatty acids

The purpose of this research was to study the capacity of emulsions containing saturated monoglyceride self‐assembly structures to deliver omega‐3 fatty acids in fresh soft cheese. To this aim, fortified emulsions containing different ratios of milk, saturated monoglycerides (MGs) and cod liver oil were added to milk before cheese‐making. These emulsions were characterised by distinct microstructural features observed by polarised light microscopy and apparent viscosity values. The omega‐3 delivery performance of MG emulsions highlighted that this strategy allowed a good retention of the omega‐3‐rich oil in the curd (up to 75%). The fortified cheeses showed yield value and fat content higher than those of control samples. The enriched cheese showed hardness and cohesiveness obtained by texture profile analysis similar to those of the unfortified product. Only a slight decrease in gumminess was detected in fortified cheese.     

Formulation of sage essential oil (Salvia officinalis,L.) monoterpenes into chitosan hydrogels and permeation study with GC-MS analysis

This study deals with the formulation of natural drugs into hydrogels. For the first time, compounds from the sage essential oil were formulated into chitosan hydrogels. A sample preparation procedure for hydrophobic volatile analytes present in a hydrophilic water matrix along with an analytical method based on the gas chromatography coupled with the mass spectrometry (GC-MS) was developed and applied for the evaluation of the identity and quantity of essential oil components in the hydrogels and saline samples. The experimental results revealed that the chitosan hydrogels are suitable for the formulation of sage essential oil. The monoterpene release can be effectively controlled by both chitosan and caffeine concentration in the hydrogels. Permeation experiment, based on a hydrogel with the optimized composition [3.5% (w/w) sage essential oil, 2.0% (w/w) caffeine, 2.5% (w/w) chitosan and 0.1% (w/w) Tween-80] in donor compartment, saline solution in acceptor compartment, and semi-permeable cellophane membrane, demonstrated the useful permeation selectivity. Here, (according to lipophilicity) an enhanced permeation of the bicyclic monoterpenes with antiflogistic and antiseptic properties (eucalyptol, camphor and borneol) and, at the same time, suppressed permeation of toxic thujone (not exceeding its permitted applicable concentration) was observed. These properties highlight the pharmaceutical importance of the developed chitosan hydrogel formulating sage essential oil in the dermal applications.     

Polymer cosolvent system

Summary Both preferential adsorption coefficient λ and intrinsic viscosity [η] for poly (di-o-alkylphenyl methacrylates) /Tetrahydrofuran (THF)/water have been determined. The results are discussed in relation to the steric effect of the ortho-substituent groups on the aromatic ring.     

Specific interactions in blends containing Chitosan and functionalized polymers. Molecular dynamics simulations

Chitosan (CS)/poly(vinyl alcohol) (PVA) and Chitosan/poly(2-hydroxyethyl methacrylate) (P2HEM) blends have been studied through molecular dynamic simulations. In a previous work it was found miscibility between these polymers and it was attributed to hydrogen bonding formation. However, the experimental information obtained was not enough to know which of the interacting groups of Chitosan, i.e. -CH₂OH or -NH₂, are responsible of the interaction. Therefore, we have performed molecular dynamics simulation runs of 1 ns in order to calculate radial distribution functions (RDF) for the groups tentatively involved in the interaction. The results are correlated with our previous experimental data. This way, we have obtained a more precise conclusive information about the interactions involved as function of the blends composition. For low compositions of PVA and P2HEM the interaction is predominantly with the hydroxymethyl groups of CS while as the composition of PVA and P2HEM increases, the interaction with the amine groups increases.     

Failure analysis of a wire rope

Wire ropes, pulleys, counterweights, and connecting systems are used for auto tensioning of contact wires of electric railways. A wire rope in one such auto tensioning system suffered premature failure. Failure investigation revealed fatigue cracks initiating at nonmetallic inclusions near the surface of individual wire strands in the rope. The inclusions were identified as Al-Ca-Ti silicates in a large number of stringers, and some oxide and nitride inclusions were also found. The wire used in the rope did not conform to the composition specified for AISI 316 grade steel, nor did it satisfy the minimum tensile strength requirements. Failure of the wire rope was found to be due to fatigue; however, the ultimate fracture of the rope was the result of overload that occurred after fatigue failure had reduced the number of wire strands supporting the load.     

Inherent emf relaxation of electrochemical cells with nanocrystalline Ag electrodes

The open circuit voltage of the electrochemical cell Ag (nano)|solid silver electrolyte|Ag (macro) is found to be inherently unstable. Even under conditions which support the morphological stability of the arrangement of nanocrystalline silver, the particles grow significantly as soon as they function as electrodes; i.e. when they are in contact with a silver electrolyte and connected electronically at the same time. The process is shown to be due to electrochemical Ostwald ripening with the interfacial transfer of Ag⁺ through the Ag/electrolyte interface being the rate limiting step. Its activation energy is 0.01 eV. The decay is in good agreement with modelling results.     

A comparative study of thin film insulation techniques for gold electrodes

The increasing use of microelectrodes in small sample volumes and biological environments require the use of thin film insulators. The insulating ability of the thin film insulators electrophoretic paint, polyimide, allylphenol phenol copolymer and an epoxy dip coat have been assessed using gold wires coated in the relevant film. Insulation was assessed by recording the current from the wires in a solution of known redox couple. The effect of prolonged storage in aqueous solutions was also investigated. The most successful insulating approach, with regards to insulative ability, prolonged use in aqueous environments and speed of application, was the combination of cathodic electrophoretic paint followed by polyimide.     

Gaze cueing of attention: Visual attention, social cognition, and individual differences.

During social interactions, people's eyes convey a wealth of information about their direction of attention and their emotional and mental states. This review aims to provide a comprehensive overview of past and current research into the perception of gaze behavior and its effect on the observer. This encompasses the perception of gaze direction and its influence on perception of the other person, as well as gaze-following behavior such as joint attention, in infant, adult, and clinical populations. Particular focus is given to the gaze-cueing paradigm that has been used to investigate the mechanisms of joint attention. The contribution of this paradigm has been significant and will likely continue to advance knowledge across diverse fields within psychology and neuroscience. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The microbiology of mixed salad containing raw and cooked ingredients without dressing

Growth of aerobic mesophilic bacteria in mixed salad without dressing, containing cooked sweet corn and raw endive, was similar to that of raw endive alone. At 9°C, sweet corn permitted the growth of the lactic acid bacterium Leuconostoc mesenteroides , whenever the bacterium was present on raw endive, whereas no growth of lactic acid bacteria was recorded on raw endive alone. Listeria monocytogenes , artificially inoculated in the samples, grew more in the mixed salad than in the raw endive alone, for products stored at 6°C and 9°C. Acidification of sweet corn to pH 5.0 was proposed to reduce the development of L. monocytogenes in the mixed salad to a level similar to that recorded in the raw endive alone. Acidification with citric acid reduced spoilage of sweet corn, whereas acetic acid caused necrosis on the leaves of raw endive.