Modeling subthreshold SOI logic for static timing analysis

A simple, yet realistic physics-based model is introduced to describe the subthreshold drain current of a MOSFET taking into account the body- and drain-voltage dependencies, including the short channel effects. This model, verified by SPICE simulations, describes adequately the pseudotriode and pseudosaturation regions of MOS transistors operated below V/sub T/. It can be applied for predicting bulk- or partially depleted (PD) SOI CMOS circuit operation. Analytical expressions derived for the logic switching threshold and delay are applied to predict the performance of CMOS-SOI inverters.     

SHS of shape memory CuZnAl alloys

Aiming at preparation of shape memory alloys (SMAs), we explored the SHS of Cu_{1 − x} Zn_{1 − y} Al_{1 − z} alloys (0.29 < x < 0.30, 0.74 < y < 0.75, and 0.83 < z < 0.96). The most pronounced shape memory effect was exhibited by the alloys of the following compositions (wt %): (1) Cu(70.6)Zn(25.4)Al(4.0), (2) Cu(70.1)Zn(25.9)Al(4.0), and (3) Cu(69.9)Zn(26.1)Al(4.0). The effect of process parameters on the synthesis of CuZnAl alloys was studied by XRD, optical microscopy, and scanning electron microscopy (SEM). The grain size of CuZnAl was found to depend on the relative amount of the primary CuZn and AlZn phases. Changes in the transformation temperature and heat of transformation are discussed in terms of ignition intensity and compaction. Mechanism of the process depends on the level of the temperature attained relative to the melting point of components. At the melting point of AlZn, the process is controlled by the solid-state diffusion of AlZn into a product layer. The ignition temperature for this system depends on the temperature of the austenite-martensite transformation in CuZnAl alloys. The composition and structure of the products was found to markedly depend on process parameters. The SHS technique has been successfully used to prepare a variety of SMAs.      

Electrical and optical study of Cu(In, Ga)Se2 co-evaporated thin films

Co-evaporation technique from three sources was used to prepare Cu(In, Ga)Se₂ polycrystalline thin films for photovoltaic conversion. Their conductivity was studied in the range 20–300 K. The grain boundary scattering mechanism is mainly responsible for the diffusion process in the latter materials. In the low temperature region, we interpret the data in terms of Mott law and the analysis is very consistent with the variable range hopping. However, thermoionic emission is predominant at high temperatures. When the conductivity deviates from the classical grain boundary conduction models, inhomogeneity is then considered and parameters such as the standard deviation and the mean potential barrier height are derived. Transmittance measurements yielded band gap values of 1.07 and 1.64 eV for CuInSe₂ and CuGaSe₂, respectively.     

Inter-comparative study of quantitative methods of industrial clinker

Impurities from the raw materials, the grinding and the homogenization of the raw materials, the kiln instability and the complexity of the cooling step, all these factors make it difficult to obtain a perfect evaluation of the mineralogical composition of Portland clinker. We studied the limitations of the most commonly used quantitative methods and recommend some procedures to obtain reliable and reproducible results of quantitative analyses. Different clinker samples (provided by the Bizerte Cement Company (Tunisia)) were subjected to an elemental analysis by X-ray fluorescence and the mineralogical composition was determined by the Bogue calculation and by X-ray powder diffraction combined with the Rietveld method (Different softwares were used: XPert High Score Plus version 2.0 and TOPAS version 4.2). We then compared the results obtained by the Rietveld method and the Bogue calculation to the specific peak areas of each phase. The content of each phase, determined by the Rietveld method, varied proportionally to the change in peak area; a significant difference in these results was found by using the elementary Bogue calculation.     

Mechanical activation-assisted electro-thermal explosion synthesis of the Ti2AlC phase

This study deals with the synthesis of the Ti₂AlC phase using the Electro-Thermal Explosion under Pressure with Confinement (ETEPC) technique. The effects of the ETEPC technique and the milling process parameters on the TiC_x phase content and the formation mechanism of the Ti₂AlC phase were investigated. The latter is mainly affected by the morphology of the powder mixture and aluminum melted amount. The optimization of the above parameters allowed the achievement of the desired reaction, leading to the formation of the Ti₂AlC phase with a purity of about 97?wt%. The results clearly demonstrate that the ETEPC process enables one to control both time and material synthesis temperature.     

Patterns of Innovation Capabilities in KIBS Firms: Evidence from the 2003 Statistics Canada Innovation Survey on Services

The aim of this paper is to shed light on complementarities and substitutions between various types of innovation capabilities in knowledge-intensive-based service (KIBS) firms. The data used in this study are the responses of 2,625 innovative firms to the 2003 Statistics Canada Innovation Survey on services. The empirical results suggest the presence of three patterns of complementary innovation capabilities, one pattern of substitute activities and finally, four patterns of innovation capabilities that are independent from each other. Hence, the results suggest the presence of complementarities: first, between internal R&D, external R&D, acquisition of equipment and machinery, and marketing activities; second, between external R&D, acquisition of equipment and machinery, acquisition of external knowledge and marketing activities; third, between acquisition of equipment and machinery, acquisition of external knowledge and marketing activities. Such complementarities lead to the conclusion that, in practice, managers of KIBS firms consider the consolidation of these capabilities jointly instead of separately. The paper also discusses issues related to patterns of capabilities that are substitutes and independent from each other. The results of this study also show significant heterogeneity in the determinants of the different patterns of innovation capabilities.     

Stator iron loss of tubular permanent-magnet Machines

While methods of determining the iron loss in rotating permanent-magnet (PM) machines have been investigated extensively, the study of iron loss in linear machines is relatively poorly documented. This paper describes a simple analytical method to predict flux density waveforms in discrete regions of the laminated stator of a tubular PM machine, and employs an established iron loss model to determine the iron loss components, on both no load and on load. Analytical predictions are compared with the iron loss deduced from finite-element analyses for two tubular PM machine designs, and it is shown that if a machine has a relatively high electrical loading, the on-load iron loss can be significantly higher than the no-load value.     

Forced migration of soluble and suspended materials by freezing front in aqueous systems

Migration of soluble and suspended materials by directional freezing of aqueous systems has been studied qualitatively. Slow freezing was employed vertically as well as horizontally through solutions and suspensions. In all cases, the impurities (soluble salts as well as suspended materials) were appreciably forced out by dynamic freezing front. The phenomenon worked for concentrating/separating inorganic ions, soluble organic compounds and dyes in synthetic solutions as well as in natural streams. Various analytical techniques were employed to monitor the migrating species through the freezing media. It was found that separation efficiency depends on different factors like rate of cooling, pH and concentration. Model experiments were designed and exercised successfully to employ the technique for treatment of dye-polluted water.