A study on dynamic friction of different spun yarns

This article presents the results from a study of yarn-to-yarn (YY) and yarn-to-metal (YM) frictions conducted on ring, rotor, air-jet, and open-end friction (OE friction) spun yarns at different relative speeds and input tensions. The results indicate that the behavior of frictions for YY is different than that of YM. In case of YY friction, OE friction yarn shows maximum friction followed by rotor, air-jet, and ring spun yarns; however, a reverse order is noticed for YM friction. The relative speed and input tension have significant influence on the frictional behavior of spun yarns. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Sand corrosion,thermal expansion,and ablation of medium- and high-entropy compositionally complex fluorite oxides

Sand corrosion, thermal expansion, and ablation properties of a new class of medium- and high-entropy compositionally complex fluorite oxides (CCFOs) are examined as potential protective coating materials. Five binary oxides were mixed and sintered into dense, single-phase CCFOs of the general formula: [Hf_(1-2x)/3Zr_(1-2x)/3Ce_(1-2x)/3Y_xYb_x]O_2-δ (x = 0.2, 0.074, and 0.029). These CCFOs exhibit decreased molten sand infiltration and interaction at intermediate temperatures (1200-1300°C) in comparison with a cubic yttria-stabilized zirconia (YSZ) reference; however, at higher temperatures, the trend is reversed due to the increased chemical reactivity. The equimolar high-entropy (Hf_0.2Zr_0.2Ce_0.2Y_0.2Yb_0.2)O_2-δ exhibits no grain boundary penetration by molten sand at all examined temperatures (1200°C-1500°C), although reaction and precipitation are significant. Moreover, these CCFOs exhibit higher intrinsic thermal expansion coefficients (CTE) than the YSZ reference, thereby being more compatible with Ni-based superalloys. The 8YSZ-like (Hf_0.284Zr_0.284Ce_0.284Y_0.074Yb_0.074)O_2-δ exhibits the highest CTE in this series of CCFOs due to oxygen clustering effects. Finally, these CCFOs also exhibit lower emissivities and form unique faceted microstructures in ablative environments.     

Architectural design and FPGA implementation of radix-4 CORDIC processor

A new scaled radix-4 CORDIC architecture that incorporates pipelining and parallelism is presented. The latency of the architecture is n/2 clock cycles and throughput rate is one valid result per n/2 clocks for n bit precision. A 16 bit radix-4 CORDIC architecture is implemented on the available FPGA platform. The corresponding latency of the architecture is eight clock cycles and throughput rate is one valid result per eight clock cycles. The entire scaled architecture operates at 56.96 MHz of clock rate with a power consumption of 380 mW. The speed can be enhanced with the upgraded version of FPGA device. A speed-area optimized processor is obtained through this architecture and is suitable for real time applications.     

Zodiac: A history-based interactive video authoring system

Easy-to-use audio/video authoring tools play a crucial role in moving multimedia software from research curiosity to mainstream applications. However, research in multimedia authoring systems has rarely been documented in the literature. This paper describes the design and implementation of an interactive video authoring system called Zodiac, which employs an innovative edit history abstraction to support several unique editing features not found in existing commercial and research video editing systems. Zodiac provides users a conceptually clean and semantically powerful branching history model of edit operations to organize the authoring process, and to navigate among versions of authored documents. In addition, by analyzing the edit history, Zodiac is able to reliably detect a composed video stream's shot and scene boundaries, which facilitates interactive video browsing. Zodiac also features a video object annotation capability that allows users to associate annotations to moving objects in a video sequence. The annotations themselves could be text, image, audio, or video. Zodiac is built on top of MMFS, a file system specifically designed for interactive multimedia development environments, and implements an internal buffer manager that supports transparent lossless compression/decompression. Shot/scene detection, video object annotation, and buffer management all exploit the edit history information for performance optimization.     

Lattice Boltzmann method simulation of electroosmotic stirring in a microscale cavity

The suitable surface modification of microfluidic channels can enable a neutral electrolyte solution to develop an electric double layer (EDL). The ions contained within the EDL can be moved by applying an external electric field, inducing electroosmotic flows (EOFs) that results in associated stirring. This provides a solution for the rapid mixing required for many microfluidic applications. We have investigated EOFs generated by applying a steady electric field across a square cavity that has homogenous electric potentials along its walls. The flowfield is simulated using the lattice Boltzmann method. The extent of mixing is characterized for different electrode configurations and electric field strengths. We find that rapid mixing can be achieved by using this simple configuration which increases with increasing electric field strength. The mixing time for water-soluble organic molecules can be decreased by four orders of magnitude by suitable choice of wall zeta potential and electric field. We dedicate this paper to the memory of our colleagues Professors Kevin Granata and Liviu Librescu who fell tragically on April 16, 2007 while answering their call to serve higher education. They continue to inspire us. AM gratefully acknowledges support from Jadavpur University under the World Bank funded Technical Education Quality Improvement Programme of the Government of India and the hospitality of the Virginia Tech ESM Department where he conducted a portion of this work.     

Pipelined VLSI Architecture using CORDIC for Transform Domain Equalizer

In this paper, a pipelined architecture using CORDIC for realization of transform domain equalizer is presented. Transform domain equalizer has much faster convergence than its time domain counterpart for practical hardware realization having nonzero adaptation delay. Here running DFT is employed as the transform, and CORDIC is used for realization of running DFT. Pipelining is applied throughout the architecture, thus limiting the critical path delay to the propagation delay of a single 16 bit adder for 16 bit arithmetic. For N tap equalizer, primary clock speed is N times of the sample clock speed, so that on arrival of each sample, the computation of whole transform and weight update is possible. In the proposed architecture, hardware complexity is reduced by fully utilizing the pipeline without using parallel structures. The adaptation delay is only 2 sample clock periods resulting in fast convergence. The proposed architecture is suitable for VLSI implementation with primary clock speed limited by the binary adder propagation delay which could be as low as 2 ns in the present state-of-the-art technology.     

Analysis of Frequency,Intensity, and Interference of Discomfort in Computerized Numeric Control Machine Operations

The introduction of Computerized Numeric Control (CNC) technology in manufacturing industries revolutionized the production process a few decades back. There are some health and safety problems associated with these machine operations, however. The main objectives of the present work is to study the health and safety issues associated with the CNC machines with respect to control and display, specifically to determine the frequency, intensity of discomfort, and its interference in operating different CNC machines as reported by the workers operating them. The postural discomfort associated with CNC machines was studied, and the frequency, intensity of discomfort, and interference of the level of discomfort with the participants' ability to work were recorded and analyzed. The study revealed that 20.5% of the operators reported discomfort 1 or 2 times, 25.4% experienced discomfort 3 to 4 times in a week, 37.7% had discomfort daily, and 16.4% reported discomfort several times a day. Discomfort was reported in all the body parts involved (lower back, neck, upper back, shoulder, and leg), but the highest discomfort scores were associated with the shoulder and arm region. Workers reporting discomfort several times a day also reported high mean discomfort scores. The study established that the frequency and intensity of the discomfort in all body parts is related to the position of the control panel and display. © 2012 Wiley Periodicals, Inc.     

Performance enhancement and energy reduction using hybrid cryogenic distillation networks for purification of natural gas with high CO2 content

A novel concept of hybrid cryogenic distillation network has been explored which maximizes the benefits of both desublimation or solid-vapor based separation as well as distillation or vapor-liquid equilibrium based separation during the separation of carbon dioxide from methane or natural gas. Process network synthesis has been performed for four case studies with high carbon dioxide (72 mole%) and medium carbon dioxide (50 mole%) natural gas feed streams. The benefits of optimal locations for cryogenic packed beds were investigated. A conventional cryogenic network consisting of multiple distillation columns with butane as additive for extractive distillation was also studied and presented in this paper. Process modeling of cryogenic distillation network with MESH equations was attempted using an integrated dual loop (C+3) convergence and the results were compared with Aspen Plus simulator for benchmarking. The prediction of solidification region was employed using experimental data from literature to avoid solidification regions in the column. The proposed hybrid cryogenic distillation network showed promising potential for energy and size reduction.     

Offshore manufacturing contract design based on transfer price considering green tax: a bilevel programming approach

The problem of designing offshore manufacturing contract resulting in optimal transfer price is troubling multinational companies over the past few years. This paper proposes designing offshore manufacturing contracts based on the transfer price in the form of bilevel programming problems after considering green tax. In these contract designs, a firm in a developed country sells a single product in its market. The same product is simultaneously being manufactured by another firm in a developing country with lower manufacturing cost. After anticipating the consumer demand, the seller places an order, based on which the manufacturer manufactures the ordered quantity, and offers a transfer price which in turn maximises its net profit after paying green tax to its government. While setting the transfer price, the manufacturer considers the manufacturing cost, the export duty payable to its government and the cost of shipping the product to the developed country. After buying the product from the manufacturer at the transfer price, the seller then sets the retail price which maximises its net profit after paying the import duty to its government; the retail price, however, must not be more than the maximum retail price applicable to the market. Thus, offshore manufacturing contract results in optimal after-tax profits for both the firms. An experimental study has been carried out to discuss the practical aspects of the results developed, where a US firm is offshoring its manufacturing activity to a Chinese firm in order to draw maximum profit.     

A column dependency-based approach for static and dynamic recovery of databases from malicious transactions

Even state of the art database protection mechanisms often fail to prevent occurrence of malicious attacks. Since in a database environment, the modifications made by one transaction may affect the execution of some of the later transactions, it leads to spreading of the damage caused by malicious (bad) transactions. Following traditional log-based recovery schemes, one can rollback (undo) the effect of all the transactions, both malicious as well as non-malicious. In such a scenario, even the unaffected transactions are also rolled back. In this paper, we propose a column dependency-based approach to identify the affected transactions which need to be compensated along with the malicious transactions. To ensure durability, committed non-malicious transactions are then re-executed in a manner that retains database consistency. We present a static recovery algorithm as well as an on-line version of the same and prove their correctness. A detailed performance evaluation of the proposed scheme with TPC-C benchmark suite is also presented.