Synergistic Effects of Polybenzimidazole and Aramide on Enhancing Flame-Retardancy and Solubility

Aromatic and functional polymers with processibility derived from biobased starting materials are prerequisite considering sustainable society. Poly(2,5-benzimidazole)s are rigid-rod polymers to show ultrahigh thermal stability such as flame retardance, while usually suffer from poor solubility. Here, poly(benzimidazole-co-amide)s are synthesized from two biobased monomers, 3,4-diaminobenzoic acid and a semirigid comonomer, 4-aminohydrocinnamic acid. The copolymers with an amide composition of 80 mol% and higher are soluble in widely used polar solvents to fabricate the films keeping high flame retardance, which is comparable with popular high-performance polymers such as aromatic polyimides, polyetheretherketone, polyphenylene sulfide, etc.     

Development of LTCC micro-hotplate with PTC temperature sensor for gas-sensing applications

Low temperature co-fired ceramic (LTCC) micro-hotplates show wide applications in gas sensors and micro-fluidic devices. It is easily structured in three-dimensional structures. This paper presents the low power consumption micro-hotplates which were developed with PTC (positive temperature coefficient) temperature sensor and inter-digitated electrodes. The paper presents two different structures for micro-hotplate with platinum as a heating element. The PTC temperature sensor using two different materials viz. PdAg and platinum paste are developed with micro-hotplates. The simulation has been achieved through COMSOL for LTCC and alumina micro-hotplates. The temperature variation with power consumption has been measured for the developed LTCC micro-hotplates. The change in resistance of PTC temperature sensors was measured with micro-hotplate temperature. The aim of this study was to place a temperature sensor with the gas sensor module to measure and control the temperature of micro-hotplate. A SnO₂ sensing layer is coated on LTCC micro-hotplate using screen printing and characterized for the sensing of carbon monoxide gas (CO). This study will be beneficial for designing hotplates based on LTCC technology with low power consumption and better stability of temperature for gas-sensing applications.     

Using Web resources to construct multilingual medical thesaurus for cross-language medical information retrieval

Due to the language barrier, non-English users are unable to retrieve the most updated medical information from the U.S. authoritative medical websites, such as PubMed and MedlinePlus. However, currently, there is no any cross-language medical information retrieval (CLMIR) system that can help Chinese-speaking consumers cross the language barrier in finding useful English medical information. A few CLMIR systems utilize MeSH (Medical Subject Headings) to help overcome the language barrier. Unfortunately, the traditional Chinese version of MeSH is currently unavailable.In this paper, we employ a semi-automatic term translation method to construct a Chinese–English MeSH by exploiting abundant multilingual Web resources, including Web anchor texts and search–result pages. Through this method, we have developed a Chinese–English Mesh Compilation System to assist knowledge engineers in compiling a Chinese–English medical thesaurus with more than 19,000 entries. Furthermore, this thesaurus has been used to develop a prototypical system for cross-language medical information retrieval, MMODE, which can help consumers retrieve top-quality English medical information using Chinese terms.     

Antihyperglycemic activity of phenolics from Pterocarpus marsupium

Glucose levels in rats with hyperglycemia induced by streptozotocin were determined after i.p. administration of marsupsin (1), pterosupin (2), and pterostilbene (3), three important phenolic constituents of the heartwood of Pterocarpus marsupium. Marsupsin and pterostilbene significantly lowered the blood glucose level of hyperglycemic rats, and the effect was comparable to that of 1,1-dimethylbiguanide (metformin).     

The electrochemical behaviour of nitrogen-containing austenitic stainless steel in methanolic solution

The corrosion behaviour of nitrogen-containing austenitic stainless steel in methanol containing different concentrations of H₂SO₄, HCl, LiCl and H₂SO₄ + HCl has been investigated using a potentiostatic polarization method. The cathodic reaction in the H₂SO₄, HCl and H₂SO₄ + HCl solutions was proton reduction whereas in the neutral LiCl solution, oxygen reduction was the predominant cathodic reaction. Active, passive and transpassive behaviours were observed only for higher concentrations of H₂SO₄ (0.01–2.0 M) due to the inherent water content. A cathodic loop, characterized by measured negative current in the anodic region, was also observed in solutions, in which the concentration of H₂SO₄ was 1.0 M or higher. The relative stability of the passive films decreased as the H₂SO₄ concentration increased, and thus the steel suffered from mild pitting corrosion. In the chloride environment, the rate of corrosion increased as the Cl⁻ ion concentration increased. The presence of acid along with Cl⁻ ions enhanced corrosion, and the corrosion rate increased significantly. The steel suffered from mild intergranular corrosion in acidic chloride solutions of methanol. In the H₂SO₄ + HCl solutions, passive films were only formed when the H₂SO₄ to HCl concentration ratio was greater than ∼10:1.     

Characterization of tempered martensite embrittlement using hardness measurement

A series of experiments were carried out on three commercial steels to explore the possibility for characterizing tempered martensite embrittlement (TME) by Rockwell, macro-, and micro-Vickers hardness tests. The results indicate distinct hardness peaks in two steels and an inflection in the other around the TME temperature. A new analytical approach for examining the slope of hardness-tempering temperature plots appears to reveal the TME phenomenon more sensitively. Dilatometric examinations substantiate that the temperature of hardness peak/inflection occurs beyond the second stage of tempering.     

Randomized trial of breast self-examination in Shanghai: methodology and preliminary results

BACKGROUND: The efficacy of breast self-examination in helping to reduce mortality from breast cancer has not been rigorously demonstrated. PURPOSE: To assess efficacy, a large, randomized trial was initiated in Shanghai, China. METHODS: From October 1989 to October 1991, 267040 current and retired female employees associated with 520 factories in the Shanghai Textile Industry Bureau were randomly assigned on the basis of factory to either a self-examination instruction group (133375 women) or a control group (133665 women). The women were born within the period from 1925 through 1958. Women in the instruction group were given intensive training in breast self-examination, including the use of silicone breast models and personalized instruction, plus two subsequent reinforcement sessions and multiple reminders to practice the technique. Women in the control group were asked to attend training sessions on the prevention of low back pain. All women have been followed for the development of breast diseases and for death from breast cancer. RESULTS: A high level of participation during the first 4-5 years of the trial was documented among women in the instruction group. Randomly sampled women in this group demonstrated greater proficiency in detecting lumps in breast models than did randomly sampled women in the control group. Approximately equal numbers of breast cancers were detected in the two groups (331 in the instruction group and 322 in the control group) through 1994, which is the last year for which case-finding efforts have been completed. The breast cancers detected in the instruction group were not diagnosed at an appreciably earlier stage or smaller size than those in the control group. More benign breast lesions were detected in the instruction group than in the control group (1457 versus 623, respectively), suggesting a higher index of suspicion for women who received training. Cumulative breast cancer mortality rates through 5 years from entry into the study were nearly equivalent for the two groups. CONCLUSIONS: Breast self-examination has not led to a reduction in mortality from breast cancer in this study cohort in the first several years since the trial began. A shift toward the diagnosis of disease at a less advanced stage in women given instruction has also not been demonstrated. Longer follow-up of participants in this trial is required before final assessment can be made of the efficacy of breast self-examination. IMPLICATIONS: At this time, there is insufficient evidence to recommend for or against the teaching of breast self-examination.     

Electrical properties of N2O/NH3 plasma grownoxynitride on strained-Si

Growth of ultrathin (<100 Å) oxynitride on strained-Si using microwave N₂O and NH₃ plasma is reported. X-ray photoelectron spectroscopy (XPS) results indicate a nitrogen-rich layer at the strained-Si/SiO₂ interface. The electrical properties of oxynitrides have been characterized using a metal-insulator-semiconductor (MIS) structure. A moderately low value of insulator charge density (6.1×10¹⁰ cm^-2) has been obtained for NH₃ plasma treated N₂O oxide sample. Nitrided oxide shows a larger breakdown voltage and an improved charge trapping properties under Fowler-Nordheim (F-N) constant current stress