A Mass Transport Model for Drying Wood under Isothermal Conditions

Mass transport in wood during drying can have different mechanisms at different periods of drying. Depending on the current moisture content (MC) and the structure of the wood, the driving forces for the mass transport are essentially different. Above the fiber saturation point (FSP), the lumens are partially saturated and the transport of liquid (free) water occurs as a consequence of capillary action. On the other hand, below the FSP, bound water within the cell walls is conveyed by diffusion, and water vapor in the lumens moves under influence of pressures gradient. Based on these considerations, a unified model is presented that takes into account the transport of the different moisture phases. Simulation of the drying of a Norway spruce sample at 50°C from about 135 to 7% MC is carried out using the finite element method (FEM). Comparison between the simulated average MC and the experimental observations obtained from X-ray computed tomography (CT) shows reasonable agreement. Possible simplifications in the model are briefly discussed as well as some aspects of the numerical implementation. Finally, the influence of absolute permeability on the average MC is studied.     

The influence of NaCl and CO2 on the atmospheric corrosion of magnesium alloy AZ91

The influence of NaCl and CO₂ on the atmospheric corrosion of magnesium alloy AZ91 is studied in the laboratory. Samples were exposed under carefully controlled air and flow conditions; the relative humidity was 95%, the temperature was 22.0°C and the concentration of CO₂ was < 1 ppm or 350 ppm. Different amounts of sodium chloride (0–70 μg/cm²) were added before exposure. The corrosion products were analyzed by gravimetry, ion chromatography, X‐ray diffraction and scanning electron microscopy. Mass gain and metal loss results are reported. The combination of high humidity and NaCl is very corrosive towards AZ91. However, the NaCl‐induced corrosion is inhibited by ambient concentrations of CO₂. Exposure in the absence of CO₂ gives rise to heavy pitting, with brucite, Mg(OH)₂, being the dominant corrosion product. In the presence of CO₂ a layer of hydrated magnesium hydroxy carbonate, Mg₅(CO₃)₄(OH)₂ · 5 H₂O forms. A tentative corrosion mechanism is presented that explains the behavior in the two environments.     

External and internal calibration of the MHC class I-specific receptor Ly49A on murine natural killer cells

Expression of the H-2Dd-specific inhibitory receptor Ly49A on murine NK cells is subject to MHC class I-dependent modulation in vivo. As a result, NK cells in H-2Dd-transgenic mice express low cell surface levels of Ly49A, whereas NK cells from nontransgenic C57BL/6 (B6) mice express high levels. The purpose of this study was to assess the role of MHC class I molecules on the NK cell itself vs those on surrounding cells in this calibration and to test whether the Ly49A levels are subject to regulation in mature NK cells also. Analysis of transgenic mice with mosaic expression of an H-2Dd/Ld transgene showed that MHC class I molecules on surrounding cells (external ligands) and on the NK cell itself (internal ligands) played distinct roles in the determination of Ly49A levels. External ligands were involved in down-regulation of Ly49A levels in vivo, whereas internal ligands kept the down-regulated levels of Ly49A low upon NK cell activation in vitro. Furthermore, in an experimental system based on adoptive transfer of spleen cells, receptor down-regulation of Ly49A occurred as a rapid adaptation process in mature NK cells after interaction with the H-2Dd ligand in vivo. This suggests that Ly49 levels are not fixed but can be changed in mature NK cells when they are exposed to a changed MHC class I environment.     

Bone growth and bone development in the presence of implants or after induced leg-lengthening studied using the Oxford Scanning Proton Microprobe

To respond to varying environmental demands the bone tissue in the body is under continual reconstruction throughout life. It is known that metallic elements are important for maintaining normal bone structure, but their roles are not well understood. More information about the effects of metal excess or deficiency is needed to help in the development of metallic bone implants and to improve the treatment of bone fractures and defects. The Oxford Scanning Proton Microprobe (SPM) is being applied in two studies involving metal ions in bone: (1) bone regrowth and bonding to titanium bone implants may be influenced by diffusion of Ti ions into the bone. We are using microPIXE to determine the metal ion content of bone developing in contact with implants of pure Nb, Ti and Ti alloys. (2) Bone lengthening as a surgical procedure is induced by fracturing the bone and allowing it to heal with a small gap between the fractured ends created by the use of external fixators. The gap can be slowly increased during the healing process to stimulate the production of new bone. The enzymes and other constituents of the developing bone need certain metals for their function. Using experimental animals we have studied the concentrations of the metals and whether a deficiency of trace metals limits the optimum rate of bone lengthening.     

Work environment functions in small enterprises in Sweden

In Sweden, a governmental commission has formed new strategies concerning the work environment with the aims of reducing employee absenteeism and re-employing those individuals who have already left employment as a result of bad working conditions. The main features in this new approach are: strengthening of the legislation; a responsibility for work injury costs; and a distinct rehabilitation responsibility. In this paper the authors discuss how these proposals suited the constraints and facilities of small enterprises, employing less than 50 persons. The results are based on interviews carried out with company directors, safety representatives and labour inspectors. The interviews revealed that the company directors had a negative attitude towards both the strengthening of legislation and responsibility for work injury costs. It was also revealed that the small companies lack both knowledge of how a good environment can be created and the state of their own work environment. It seems that the small companies cannot handle work environment questions in a systematic way without comprehensive education and training or without seeking expert assistance outside the company.     

A NUMERICAL SOLUTION OF THE FLOW AROUND A SPHERE IN A CIRCULAR CYLINDER

A numerical solution of the Navier-Stokes equations is presented for Poiseuille flow around an axially placed, fixed sphere in a circular cylinder. Streamlines and isovorticity lines are calculated from the governing equations for the strearnfunction and the vorticity. Isobars are calculated from a Poisson equation, derived from the Navier-Stokes equations. The pressure and vorticity distribution on the surface of the sphere, the additional pressure drop and the drag coefficients are presented. Solutions are obtained for Reynolds numbers up to 150 (based on cylinder diameter and mean velocity). The wall effects are examined by comparison with results of previous investigations for an unbounded flow around a sphere.     

The content and composition of sterols and sterol esters in low erucic acid rapeseed (Brassica napus)

The low temperature crystallization technique for the enrichment of “minor” components, such as sterols and sterol esters, from vegetable oils was applied to low erucic acid rapeseed oils. The recovery of free sterols and sterol esters was estimated by use of¹⁴C-cholesterol and¹⁴C-cholesterol oleate. 80% of the free sterols and 45% of the sterol esters were recovered in the liquid fraction, while in two studies total recoveries were 95% and 99%, respectively. This technique showed some selectivity toward the sterol bound fatty acids when compared to direct preparative thin layer chromatography (TLC) of the crude oil. Gas liquid chromatography (GLC) analysis of the free and esterified sterols as TMS-derivatives showed very little selectivity in the enrichment procedure. The fatty acid patterns of the sterol esters demonstrated, however, a preference in the liquid fraction for those sterol esters which have a high linoleic and linolenic acid content. The content of free sterols was 0.3–0.4% and that of sterol esters 0.7–1.2% of the rapeseed oils in both winter and summer types of low erucic acid rapeseed (Brassica napus) when the lipid classes were isolated by direct preparative TLC of the oils. The free sterols in the seven cultivars or breeding lines analyzed were composed of 44–55% sitosterol, 27–36% campesterol, 17–21% brassicasterol, and a trace of cholesterol. The esterified sterols were 47–57% sitosterol, 36–44% campesterol, 6–9% brassicasterol, and traces of cholesterol and Δ5-avenasterol. The fatty acid patterns of these esters were characterized by ca. 30% oleic acid and ca. 50% linoleic acid, whereas these acids constitute 60% and 20%, respectively, of the total fatty acids in the oil. Little or no variation in sterol and sterol ester patterns with locality within Sweden was observed for the one cultivar of summer rapeseed investigated by the low temperature crystallization technique.     

Adsorption on activated carbon in countercurrent flow: An experimental study

The work describes adsorption experiments from aqueous solutions on activated carbon using a counter-current adsorber. Phenol and paranitrophenol were used for single component adsorption and molasses colour for multicomponent adsorption experiments. Isotherms were determined using simple equilibrium experiments. Three different techniques were used for determination of the kinetics. These were finite bath, infinite bath and fixed bed experiments. A mathematical model for countercurrent adsorption was tested. The model includes the effect of film diffusion and pore diffusion as well as surface diffusion, and can handle systems with a nonlinear isotherms. Kinetic data in the form of an average diffusivity in the carbon determined from the finite bath experiments and isotherm data did not predict the operation of the countercurrent column well. Data from the fixed bed experiments predicted countercurrent column operation much better. This is deemed to be due to inhomogeneities in the carbon used, resulting in a fairly quick initial uptake of the main part of the solute and a slower uptake of a minor amount.     

The method of fundamental solutions for problems in static thermo-elasticity with incomplete boundary data

An inverse problem in static thermo-elasticity is investigated. The aim is to reconstruct the unspecified boundary data, as well as the temperature and displacement inside a body from over-specified boundary data measured on an accessible portion of its boundary. The problem is linear but ill-posed. The uniqueness of the solution is established but the continuous dependence on the input data is violated. In order to reconstruct a stable and accurate solution, the method of fundamental solutions is combined with Tikhonov regularization where the regularization parameter is selected based on the L-curve criterion. Numerical results are presented in both two and three dimensions showing the feasibility and ease of implementation of the proposed technique.