Rapid determination of the fracture toughness of metallic materials using circumferentially notched bars

Three types of material whose fracture toughness tests were previously performed by using circumferentially notched bars, namely (1) a dual-phase steel with three different morphologies; (2) an Al-Zn-Mg-Cu-wrought alloy; and (3) Al-Si-cast alloys with three different Si contents, were investigated in terms of accuracy and reliability of the testing method. Also, the advantages of using circumferentially notched bars for fracture toughness determination of metallic materials were discussed. With the help of stress concentration factors, which are associated with the bluntness of the notch, correction factors for the fracture toughness calculations are derived. The corrected fracture toughness values are found to be close to the uncorrected ones, implying that the testing procedure is reliable.     

A comparison of swarm-based optimization algorithms in linear antenna array synthesis

Today, the design of antenna arrays is very important in providing effective and efficient wireless communication. The purpose of antenna array synthesis is to obtain a radiation pattern with a low side lobe level (SLL) at a desired half power beam width in far-field. The amplitude and position values of the array elements can be optimized to obtain a radiation pattern with suppressed SLLs. In this paper, swarm-based metaheuristic algorithms including particle swarm optimization (PSO), artificial bee colony (ABC), mayfly algorithm (MA) and jellyfish search (JS) are compared to determine the optimal design of linear antenna arrays. Extensive experiments are conducted on designing 10-, 16-, 24- and 32-element linear arrays by determining the amplitude and positions. Experiments are repeated 30 times due to the random nature of swarm-based optimizers, and statistical results show that the performance of the novel algorithms, MA and JS, is better than that of the well-known PSO and ABC methods.

     

The musculoskeletal system complaints of office workers at a vehicle production factory

This study aimed to determine the prevalence of and factors contributing to musculoskeletal system complaints (MSC) in office workers of a vehicle production factory and absenteeism due to these complaints. A total of 86.2% (n = 333) of the workers completed the survey. Of the workers, 73 (21.9%) were women, and 260 (78.1%) were men, and the mean age was 36.9 ± 8.75 years. The majority of the personnel had more than one symptom with a prevalence of 80.8%. The most frequently observed discomfort was tension and pain in the back muscles (58.6%) and in the neck muscles (58.3%), followed by low back pain (41%) and shoulder pain (30.3%). Pain in the shoulders, neck, and the back and pain and numbness in the fingers were statistically significantly more prevalent in employees who spent more than 5 hours per day performing desk work. Furthermore, all of the complaints, excluding pain in the elbows and knees, were statistically significantly more common in the women. When each complaint and the effects of contributing risk factors were analyzed by logistic regression analysis, pain in the shoulders, neck, and back; pain that spread to the arms; and pain in the fingers were correlated with longer work hours and the female gender (p < 0.05). The number of employees who had used sick leave within the past year due to MSCs was 11.7%. In conclusion, duration of work hours, frequency of breaks, and gender were determined as the most important risk factors in computer users regarding MSCs. © 2011 Wiley Periodicals, Inc.     

The hydro-abrasive erosion wear behavior of duplex-treated surfaces of AISI H13 tool steel

The influence of duplex surface treatments consisting of a DC-pulsed plasma nitriding process and subsequent coatings of CrN and TiAlN deposited by physical vapor deposition(PVD)on AISI H13 tool steel was studied in this article.The treated samples were characterized using metallographic techniques,SEM,EDS,and microhardness methods.Hydro-abrasive erosion wear tests were performed in a specifically designed wear tester in which the samples were rotated in a wear tank containing a mixture of distilled water and ceramic abrasive chips with a fixed rotational speed.The wear rates caused by the abrasive particle impacts were assessed based on accumulated weight loss measurements.The worn surfaces were also characterized using optical microscopy,SEM,and EDS.Microhardness measurements indicated a significant increase in the surface hardness of the duplex-treated samples.The surfaces of the samples with the TiAlN coating were approximately 15 times harder than that of the untreated samples and 3 times that of the plasma nitrided samples.Hydro-abrasive erosion wear results showed that the duplex surface treatments,especially the CrN coating,displayed the highest erosion wear resistance.     

Calculations of the transmitted gamma photons through infinite slabs

The intensity and number of transmitted multiple scattered photons are calculated for 0.123, 0.320, 0.511,0.662, and 1.115 Me V gamma photons normally incident on slabs of carbon, aluminum, iron, copper, water, muscle,bone, and concrete with thicknesses varying from 1 to 10 mean free paths. The dependence of the transmission probability and energy distribution on the incident energy and material are examined. In general, the obtained results show good agreement with the other values calculated by the Monte Carlo method.     

Synthesis and Characterization of PEG-Sr Hexaferrite by Sol–Gel Conversion

Sr-M-type hexagonal ferrites have been prepared via a sol?Cgel route, and the effects of addition of different molecular weight polyethylene glycol (PEG) into the sol solutions on the static magnetic properties and particle morphology have been studied. Crystalline phases of the samples were determined by XRD analysis. FT-IR and TG analyses were used to prove the presence of PEG on SrFe₁₂O₁₉. The results showed that adding PEG with different molecular weight into the sol solutions affected the formation mechanism of SrFe₁₂O₁₉. Sr-M precursors prepared by various PEG types show different magnetic behaviors after pre-calcination at 150?^°C. This discrepancy is explained by the formation of a different phase during the synthesis of SrM particles.     

Collaborative and Cognitive Network Platforms: Vision and Research Challenges

In this paper, we present a visionary concept referred to as Collaborative and Cognitive Network Platforms (CCNPs) as a future-proof solution for creating a dependable, self-organizing and self-managing communication substrate for effective ICT solutions to societal problems. CCNP creates a cooperative communication platform to support critical services across a range of business sectors. CCNP is based on the personal network (PN) technology which is an inherently cooperative environment prototyped in the Dutch Freeband PNP2008 and the European Union IST MAGNET projects. In CCNP, the cognitive control plane strives to exploit the resources to better satisfy the requirements of networked applications. CCNP facilitates collaboration inherently. Through cognition in the cognitive control plane, CCNP becomes a self-managed substrate. The self-managed substrate, in this paper, is defined as cognitive and collaborative middleware on which future applications run without user intervention. Endemic sensor networks may be incorporated into the CCNP concept to feed its cognitive control plane. In this paper, we present the CCNP concept and discuss the research challenges related to collaboration and cognition.     

One-pot two-step lipase-catalyzed synthesis of α,ω-thiophene-capped poly(ε-caprolactone) macromonomers and their use in electropolymerization

Macromonomers based on poly(ε-caprolactone) (PCL) with α,ω-thiophene functional end groups were prepared in bulk by enzymatic polymerization using immobilized Candida Antarctica lipase B (Novozym 435) as the catalyst. In the synthesis strategy, 3-thiophenemethanol was used to initiate the enzyme-assisted ring-opening polymerization of ε-caprolactone (ε-CL) to yield PCL with α-thiophene end group (initiation reaction, ThPCL) and then 3-thiopheneacetic acid was added to prepolymerized ε-CL to introduce ω-thiophene functionality in termination step (ThPCLTh). Macromonomers were characterized by ¹H and ¹³C NMR, FTIR, and GPC. Moreover, the obtained macromonomers were employed in electropolymerization experiments and copolymers with thiophene or pyrrole were synthesized through their end thiophene groups. These polymers were characterized by cyclic voltammetry (CV), FTIR, and scanning electron microscopy (SEM). Conductivity measurements were carried out by the four-probe technique.