Characterization of Tomato Pulp Stickiness during Spray Drying using a Contact Probe Method

A contact probe test was developed to characterize the surface stickiness of a tomato pulp droplet at various moisture contents and temperatures. To provide tomato pulp samples with different moisture contents, tomato powder produced by a laboratory spray dryer was wetted to seven different moisture levels. The instantaneous tensile force curve was recorded during the probe withdrawal from which the maximum tensile force and other useful information were obtained and cross-examined against images of bonding, debonding, and failure of the material. Generally, at higher moisture contents tomato pulp exhibited cohesive failure followed by semi-adhesive failure, but when moisture content decreased to a certain level, a peak tensile pressure was observed and the failure was adhesive. In addition, higher temperatures shifted the points of adhesive failure toward lower moisture content.     

Spray Drying Performance of a Laboratory Spray Dryer for Tomato Powder Preparation

This work investigates the performance of a spray dryer for tomato powder preparation by spray drying of tomato pulp. Samples of tomato pulp with a 14% constant total solids concentration were used, and a pilot scale spray dryer (Buchi, B-191) with cocurrent operation and a two-fluid nozzle atomizer was employed for the spray drying process. Twenty-four different experiments were conducted keeping constant the feed rate, the feed temperature, and the atomizer pressure, and varying the compressed air flow rate, the flow rate of drying rate, and the air inlet temperature. In each experiment the air outlet temperature was recorded. Data for the residue remaining in the chamber and cyclone walls was gathered and two types of efficiencies were calculated as an indication of the spray dryer performance. Analysis of experimental data yielded correlations between residue accumulation and the variable operating conditions. The same operating parameters had a great influence on the air outlet temperature whereas temperature deviations were observed comparing measured air outlet temperatures with corresponding outlet adiabatic saturation temperatures.     

Survival of Escherichia coli O157:H7 in Galotyri cheese stored at 4 and 12 degrees C

Post-process contamination of fresh acid-curd cheeses with Escherichia coli O157:H7 may pose a risk considering the low infectious dose and the ability of the pathogen to survive in acidic foods. To evaluate its survival in Galotyri, a traditional Greek acid-curd cheese, portions (0.5 kg) of two commercial fresh products, one artisan (pH 3.9+/-0.1) and the other industrial (pH 3.7+/-0.1), were inoculated with approximately 3.0 or 6.5 log cfu g(-1) of a five-strain cocktail of E. coli O157:H7, including rifampicin-resistant derivatives of the strains ATCC 43895 and ATCC 51657, and stored aerobically at 4 and 12 degrees C. Survival was monitored for 28 days by plating cheese samples on tryptic soy agar with 100 mg l(-1) rifampicin (TSA+Rif), SMAC and Fluorocult E. coli O157:H7 agar media. The pathogen declined much faster (P<0.05) in the industrial as compared to the artisan cheeses at both temperatures. Thus, while E. coli O157:H7 became undetectable by culture enrichment after 14 days at 4 degrees C in industrial samples, irrespective of the inoculation level, populations of 1.4-1.9 and 4.2-5.1 log cfu g(-1) survived after 28 days in the corresponding artisan cheeses with the low and high inocula, respectively. Survival was longer and greater (P<0.05) on TSA+Rif than on SMAC and Fluorocult, indicating the presence of acid-injured cells. Interestingly, survival of E. coli O157:H7 after 14-28 days in cheeses was better at 12 degrees C than at 4 degrees C, probably due to yeasts which grew on the surface of temperature-abused cheeses. The large difference in the pathogen's inactivation between the industrial and artisan cheeses at 4 degrees C could not be associated with major differences in pH or type/concentration of organic acids, suggesting another anti-E. coli O157:H7 activity by the industrial starter. The high survival of the pathogen in artisan Galotyri under conditions simulating commercial storage should be of concern.     

An Advanced Centrifugal Technique to Characterize the Sticking Properties of Tomato Pulp during Drying

An advanced centrifugal technique was developed to characterize the stickiness of tomato pulp at various moisture contents and temperatures. To provide tomato pulp samples with different moisture contents, tomato powder produced by a laboratory spray dryer was wetted to six different moisture levels. By noting the rotational speed for a tomato pulp droplet detachment and weighing the mass of the droplet remaining on the surface it is possible to gauge the approximate attachment forces holding the droplet to the substrate. The effects of droplet mass and centrifugation time after reaching the desired rotor speed on the detachment rate were also studied. The detachment force was found to increase at the beginning and then started decreasing as the moisture content decreased presenting a maximum at moisture content of about 34%. In addition, the higher the droplet temperature, the higher the attachment force.     

Ultrasound-assisted extraction of pomegranate seed oil – Kinetic modeling

In this work, ultrasound-assisted extraction was employed to extract oil from pomegranate seeds. Seed particle size, extraction temperature, solvent/solid ratio, amplitude level, and pulse duration/pulse interval ratio were the factors investigated with respect to extraction yield using a central composite design. The optimum operating conditions were found to be: seed particle size, 0.2 mm; extraction temperature, 20 ^oC; solvent/solid ratio, 20/1; amplitude level, 60%; pulse duration/pulse interval ratio, 5/15. Under these optimized conditions, the predicted value for extraction yield was 59.8%. A second-order kinetic model was successfully developed for describing the mechanism of ultrasound extraction under different processing parameters.     

Enhanced antiviral activity of soybean β-conglycinin-derived peptides by acylation with saturated fatty acids

Abstract: Peptide mixtures prepared from soybean β‐conglycinin (7S‐peptides) were acylated with saturated fatty acids of different chain length (6C‐18C) in order to improve their antiviral activity against Feline calicivirus (FCV) strain F9 which is a typical norovirus surrogate. Among the fatty acids varieties, it was revealed that 7S‐peptides acylated with myristic and palmitic acids potently inhibited FCV replication. Myristorylation and palmitoylation of 7S‐peptides kept host cells viability at 91.51% and 98.90%, respectively. The infectivity of FCV on Crandell–Reese feline kidney cells was further determined after exposure of initial titer of 10^6.47 TCID₅₀/mL. Myristoylated and palmitoylated 7S‐peptides significantly (P < 0.006) reduced FCV infectivity as compared to native 7S‐peptides. Native 7S‐peptides showed 25% FCV inhibitory activity while myristoylated and palmitoylated 7S‐peptides exhibited 98.59% and 99.98% reduction in FCV infectivity, respectively. Myristoylated and palmitoylated 7S‐peptides demonstrated higher anti‐FCV activity in a wide range of concentration with complete reduction at 25 μg/mL. Surface hydrophobicity was significantly (P < 0.05) increased after attachment of long hydrocarbon fatty acids to 7S‐peptides as supported by changes in fluorescence intensity. Enzymatic hydrolysis together with acylation will give an insight into surface and physiological functional lipopeptides derived from soy β‐conglycinin.     

Spray Drying of Tomato Pulp: Effect of Feed Concentration

The effect of feed concentration on spray drying of tomato pulp preconcentrated to 78, 82, and 86% wet basis is investigated in two spray drying systems: a pilot scale spray dryer (Buchi, B-191) with cocurrent regime and a two-fluid nozzle atomizer, and the same connected with an absorption air dryer (Ultrapac 2000). Data for the residue on the chamber and cyclone walls were gathered and two types of efficiencies were calculated as an indication of the spray dryer performance. Tomato powders were analyzed for moisture, particle size, and bulk density. In both spray drying systems, with increases in tomato pulp concentration overall thermal efficiency, evaporative efficiency, material loss in the cyclone, powder moisture content, and bulk density decreased, whereas powder particle size increased. On the contrary, the effect of feed solids content on residue formation and product recovery was dependent on the drying medium. In the standard dryer, the higher the feed concentration, the higher was the residue accumulation, and the lower the product recovery, whereas in the modified system increases in pulp concentration resulted in lower residue formations and higher product yields.     

The Role of Leptin in Childhood Immune Thrombocytopenia (ITP): An Anti-Inflammatory Agent?

To investigate the effect of leptin in childhood ITP, we measured plasma leptin in 39 children with acute ITP, after treatment and in remission, and in 33 healthy age/BMI-matched controls. We also cultured ITP and control peripheral blood mononuclear cells (PBMCs) with recombinant leptin to assess its direct effect on pro/anti-inflammatory cytokine gene expression. A significant increase in leptin was observed in children with active disease compared to controls. A significant inverse correlation of leptin with platelet count was also observed in children with acute ITP. Leptin remained high after treatment with IVIg, whereas steroid treatment lowered leptin below control levels. In remission, leptin was in the control range. Cytokine gene expression was significantly increased in children with acute ITP compared with controls, with highest expression for IFN-γ and IL-10. IVIg/steroid treatment significantly decreased IFN-γ and IL-10 expression. In remission, IFN-γ and IL-10 expression remained low. Addition of leptin to PBMCs isolated from patients in remission resulted in a significant increase in IL-10 gene expression compared to controls. Further experiments with purified T-cells and monocytes identified monocytes as the source of leptin-induced IL-10. We suggest that leptin acts as an active anti-inflammatory agent in childhood ITP by promoting IL-10 secretion by monocytes.