Geometric features of the flame propagation process for an SI engine having dual‐ignition system

Flame front surface area and enflamed volume (the volume enclosed with flame front) is theoretically analysed for a spark‐ignition engine, having cylindrical disc‐shaped combustion chamber with two spark plugs located axisymmetrically on cylinder head, between cylinder axis and cylinder wall. Spherical flame front assumption is used. A computer code is developed based on purely geometric consideration of the flame development process in combustion chamber, and is used to investigate the effects of variations of spark plugs' locations on geometric features of the flame front. A comparison has also been made with a spark‐ignition engine having one spark plug at the same location. Copyright © 2002 John Wiley & Sons, Ltd.     

二维地震过障碍观测系统模式及其参数设计

在二维地震勘探中,为了避免因地表障碍物使地震反射剖面出现间断现象,需要改变观测系统设计,跨越障碍物(江河、城镇等),以保证反射同相轴能连续追踪对比。在以往地震勘探中,有时因过障碍观测系统设计不合理,不但增加勘探费用,而且影响采集质量。因此只有科学合理地设计过障碍观测系统模式和参数,才能保证地震测线顺利通过障碍物,得到较好的障碍物下方的地震资料并降低勘探成本。为此本文在调查和研究大量野外实际的过障碍观测系统的基础上,总结归纳成三大类过障碍观测系统模式,并分析其特点和应用范围。采用图解法,推导出主要模式的跨越宽度、最小炮检距及最大炮检距等参数公式。采用这套过障碍观测模式不仅可以得到和障碍区两侧等质量的地震资料,而且可以有效地降低勘探成本。     

THE RELATION BETWEEN WETTING EFFICIENCY AND LIQUID HOLDUP IN PACKED COLUMNS

Liquid holdup and wetting efficiency in packed columns were determined using a tracer method. A new model was developed considering axial dispersion, and analysis was made using the moment technique. The saturated solution of KG was used as an inert tracer and total liquid holdups were determined in the first part of experiments. As an adsorbable tracer, dioxane was utilized in the second part of the work and wetting efficiencies were obtained. Adsorption equilibrium constant was determined by the experiments conducted in a liquid full bed. A model proposed between liquid holdup and wetting efficiency gave good agreement with the experimental results. Axial dispersion effects were also taken into account during the work. It was also shown that axial dispersion of liquid phase should be considered especially in the small scale trickle bed reactors. @KEYWORDS:Packed beds,Wetting efficiency,Liquid holdup,Tracer method,Moment technique,Trickle bed reactors.     

Methacrylate-functionalized POSS influence on cross-linking and mechanical properties of styrene-butadiene rubber

Iranian Polymer Journal - The addition of methacrylate-functional polyhedral oligomeric silsesquioxane (MA-POSS) nanoparticles to styrene-butadiene rubber (SBR) composites was evaluated in terms of...     

Siamese multi-layer perceptrons for dimensionality reduction and face identification

This paper presents a framework using siamese Multi-layer Perceptrons (MLP) for supervised dimensionality reduction and face identification. Compared with the classical MLP that trains on fully labeled data, the siamese MLP learns on side information only, i.e., how similar of data examples are to each other. In this study, we compare it with the classical MLP on the problem of face identification. Experimental results on the Extended Yale B database demonstrate that the siamese MLP training with side information achieves comparable classification performance with the classical MLP training on fully labeled data. Besides, while the classical MLP fixes the dimension of the output space, the siamese MLP allows flexible output dimension, hence we also apply the siamese MLP for visualization of the dimensionality reduction to the 2-d and 3-d spaces.     

Investigating the influence of tool shape during FSW of aluminum alloy via CFD analysis

This paper describes the application of the CFD code, Comsol Multiphysics, to modeling the 3-D metal flow in friction stir welding of AA 2024-T3 aluminum alloy in order to investigate the influence of tool shape over the metal flow. Heat transfer and non-Newtonian flow equations were solved simultaneously. The results from the benchmark experiments found in the literature were used for validation purposes. Scrolled shoulders and threaded pins were given as kinematic boundary conditions. This made the computational problem an easy one. A welding engineer can predict the metal flow around the tool with different scrolls and threads under any welding conditions without making expensive experiments. Investigation of the velocity field before actual welding can save a lot of engineering hours.     

Two new control signal approaches for obtaining the MRAS-CDM and a real-time application

The coefficient diagram method (CDM) is one of the most effective control design methods. It creates control systems that are very stable and robust with responses without the overshoot and small settling time. Furthermore, all control parameters of the control systems are changed by varying some adjustment parameters in CDM depending on the demands. The model reference adaptive systems (MRAS) are the systems that follow and change the control parameters according to a given model reference system. There are several methods to combine the CDM with MRAS. One of these is to use the MRAS parameters as a gain of the CDM parameters. Another is to directly use the CDM parameters as the MRAS parameters. In the industrial applications, the system parameters can be changed frequently, but if the controller, by self-tuning, recalculates and develops its own parameters continuously, the system becomes more robust. Also, if the poles of the controlled systems approach the jw axis, the response of the closed-loop MRAS becomes more and more insufficient. In order to obtain better results, CDM is combined with a self-tuning model reference adaptive system. Systems controlled by a model reference adaptive controller give responses with small or without overshoot, have small settling times, and are more robust. Thus, in this paper, a hybrid combination of MRAS and CDM is developed and two different control structures of the control signal are investigated. The two methods are compared with MRAS and applied to real-time process control systems.     

Graft copolymers from commercial chlorinated polypropylene via Cu(0)‐mediated atom transfer radical polymerization

Commercially available chlorinated polypropylene has been used as a macroinitiator for the Cu(0)‐mediated atom transfer radical polymerization of methyl methacrylate and tert‐butyl acrylate to obtain well‐defined graft copolymers. The relatively narrow molecular weight distribution in the graft copolymers and linear kinetic plots indicated the controlled nature of the copolymerization reactions. Both Fourier transform infrared and ¹H NMR studies confirmed that the graft reactions had taken place successfully. After graft copolymer formation, tert‐butyl groups of poly(tert‐butyl acrylate) side chains were completely converted into poly(acrylic acid) chains to afford corresponding amphiphilic graft copolymers. © 2016 Society of Chemical Industry