Synergistic effect of high-intensity ultrasound and β-cyclodextrin treatments on browning control in apple juice

This work evaluated the synergistic effects of combined high-intensity ultrasound (HIU) with β-cyclodextrin (β-CD) treatments on inhibiting browning of apple juice and explored the mechanism through simulation system. The combined treatment of 300 W HIU with 0.006 g mL⁻¹ β-CD had a synergistic impact on maintaining juice colour, resulting in a 39.06% reduction in browning degree, only a 36.64% decrease in total phenolic content, and a 17.82% reduction in PPO activity. The inhibition of enzymatic browning in simulated system revealed that HIU suppressed the enzyme (Polyphenol oxidase, PPO) and β-CD inhibited enzyme (PPO) and embedded substrate (polyphenol). The results of spectroscopic analysis showed that the particle-size distribution of PPO narrowed, the content of α-helix in the secondary structure increased, the fluorescence intensity increased, and the maximum wavelength was red-shifted after HIU and β-CD treatment. Changes in structure could further result in PPO activity loss. Hence, the combined treatment could synthetically alleviate the browning of apple juice.     

Superradiant Emission from Coherent Excitons in van Der Waals Heterostructures

Recent advancements in isolation and stacking of layered van der Waals materials have created an unprecedented paradigm for demonstrating varieties of 2D quantum materials. Rationally designed van der Waals heterostructures composed of monolayer transition-metal dichalcogenides (TMDs) and few-layer hBN show several unique optoelectronic features driven by correlations. However, entangled superradiant excitonic species in such systems have not been observed before. In this report, it is demonstrated that strong suppression of phonon population at low temperature results in a formation of a coherent excitonic-dipoles ensemble in the heterostructure, and the collective oscillation of those dipoles stimulates a robust phase synchronized ultra-narrow band superradiant emission even at extremely low pumping intensity. Such emitters are in high demand for a multitude of applications, including fundamental research on many-body correlations and other state-of-the-art technologies. This timely demonstration paves the way for further exploration of ultralow-threshold quantum-emitting devices with unmatched design freedom and spectral tunability.     

Efficient driving-capability programmable frequency divider with a wide division ratio range

A programmable frequency divider with close-to-50% output duty-cycle, with a wide division ratio range, is presented. The proposed divider has also provisions for binary division ratio controls, and has demonstrated operation at frequencies as high as 3.5 GHz. With the above features, the proposed divider can be used in phase-locked loops, and is capable of driving various clocked circuits, which need different clock frequencies. The proposed divider has division ratios from 8 to 510, but it can easily be extended to higher ranges by simply adding more divider stages. The divider circuit has been realised in a 0.18-mum RF CMOS process. Test results show that the output duty-cycle is 50% when the division ratio is an even number. For odd division ratios the worst-case duty-cycle is 44.4% when the division ratio is 9. The output duty-cycle becomes closer to 50% when the division ratio is an increasing odd number. For each division ratio, the output duty-cycle remains constant for different chips, with different input frequencies from gigahertz down to kilohertz ranges, and with different power supply voltages.     

PMSS: A programmable memory system and scheduler for complex memory patterns

HPC industry demands more computing units on FPGAs, to enhance the performance by using task/data parallelism. FPGAs can provide its ultimate performance on certain kernels by customizing the hardware for the applications. However, applications are getting more complex, with multiple kernels and complex data arrangements, generating overhead while scheduling/managing system resources. Due to this reason all classes of multi threaded machines–minicomputer to supercomputer–require to have efficient hardware scheduler and memory manager that improves the effective bandwidth and latency of the DRAM main memory. This architecture could be a very competitive choice for supercomputing systems that meets the demand of parallelism for HPC benchmarks. In this article, we proposed a Programmable Memory System and Scheduler (PMSS), which provides high speed complex data access pattern to the multi threaded architecture. This proposed PMSS system is implemented and tested on a Xilinx ML505 evaluation FPGA board. The performance of the system is compared with a microprocessor based system that has been integrated with the Xilkernel operating system. Results show that the modified PMSS based multi-accelerator system consumes 50% less hardware resources, 32% less on-chip power and achieves approximately a 19x speedup compared to the MicroBlaze based system.     

Self and static interference mitigation scheme for coexisting wireless networks

High density of coexisting networks in the Industrial, Scientific and Medical (ISM) band leads to static and self interferences among different communication entities. The inevitability of these interferences demands for interference avoidance schemes to ensure reliability of network operations. This paper proposes a novel Diversified Adaptive Frequency Rolling (DAFR) technique for frequency hopping in Bluetooth piconets. DAFR employs intelligent hopping procedures in order to mitigate self interferences, weeds out the static interferer efficiently and ensures sufficient frequency diversity. We compare the performance of our proposed technique with the widely used existing frequency hopping techniques, namely, Adaptive Frequency Hopping (AFH) and Adaptive Frequency Rolling (AFR). Simulation studies validate the significant improvement in goodput and hopping diversity of our scheme compared to other schemes and demonstrate its potential benefit in real world deployment.     

Polymer and nanobelt derived nanomaterials: opening doors to revolutionary stadia

ABSTRACT

The state-of-the-art article presents concepts of nanobelt nanofiller, inimitable properties of derived polymeric nanocomposite, applications, and outlook on challenges to gain next generation high-performance materials. Nanobelt is a one-dimensional nanostructured nanomaterial. Owing to minuscule size and high surface area, nanobelt possesses unique structural, optical, electronic, mechanical, and thermal characteristics. Nanobelt exists in various forms such as carbon nanobelt, polymer nanobelt, and inorganic. These nanobelts have been used to develop polymer/nanobelt nanocomposites. Homogeneous dispersion of nanobelt in polymer matrices is desirable to enhance the characteristics of polymer/nanobelt nanocomposite. Consequently, innovations in design, fabrication, and properties of various polymer/nanobelt nanocomposite are summarized. Applications of polymer/nanobelt nanocomposite are reviewed for Li-ion battery, supercapacitor, sensor, membrane, and biomedical arenas.     

Eco-friendly electronics,based on nanocomposites of biopolyester reinforced with carbon nanotubes: a review

ABSTRACT

Fabrication of electronic materials from nanocomposite of biopolyesters reinforced with carbon nanotubes can be regarded as the effective alternative for conventional nanocomposites consisting of non-biodegradable polymers. Commercial availability of biopolyester-based nanocomposites is limited because of their high cost compared to other polymers, but the factor of their compostable nature is worthless for environmental protection. Such nanocomposites have potential applications in biodegradable sensors, EMI materials, etc. In this review, the current progress of biopolyester/CNTs nanocomposites in the field of biodegradable electronics is reviewed and also the impact of CNTs dispersion on electrical, thermal and mechanical properties of eco composites is stipulated.     

Impact of processing conditions and sizing on the thermomechanical and morphological properties of polypropylene/carbon fiber composites fabricated by material extrusion additive manufacturing

For the 3D printed composites, fiber alignment is affected by the direction of melt-flow during extrusion of filaments and subsequently through the printing nozzle. The resulting fibers orientation and the fiber-matrix compatibility have a direct correlation with mechanical properties. This study investigates the impact of processing conditions on the state of the carbon fiber types and their orientation on the mechanical properties of 3D-printed composites. Short and long carbon fibers were used as starting reinforcing materials, and the state of fibers at the beginning and on the printed parts were evaluated. Strong anisotropy in terms of mechanical properties (flexural and impact properties) was observed for the samples printed with different printing orientations. Interestingly, the number of voids in the printed composites was found to be correlated with the fiber types. The present work provides a step towards the optimization of tailored composite properties by additive manufacturing.