Gas temperature measurements in weakly ionized glow discharges with filtered Rayleigh scattering

We report the first gas temperature measurements in plasmas to our knowledge obtained by filtered Rayleigh scattering (FRS). A narrow-linewidth Ti:sapphire laser is used as the illumination source, and a mercury filter provides strong suppression of elastic background. We perform measurements in weakly ionized glow discharges in pure argon and in an argon-plus-1%-nitrogen mixture. Where possible, we verify the FRS technique by comparing filtered measurements with unfiltered measurements. We present point measurements of axial temperature with uncertainties of less than 5%. We use a planar scheme to obtain radial temperature profiles with uncertainties of 10%.     

Hepatoprotection in ethinylestradiol-treated rats is provided by tauroursodeoxycholic acid, but not by ursodeoxycholic acid

Ursodeoxycholic acid (UDCA) and tauroursodeoxycholic acid (TUDCA) have been suggested as potential treatments for drug-induced cholestasis. It was therefore decided to study the effects of administration of UDCA or TUDCA on individual serum bile acid concentration, conventional liver tests and associated hepatic ultrastructural changes in ethinylestradiol-treated (EE) rats mg/kg per day). Control rats were treated s.c. with propylene glycol. EE-treated rats were randomly assigned to receive daily i.p. injections of placebo, TUDCA or UDCA. Four rats in each group were treated for 4 consecutive days, and a second four for 14 days. After 4 days of treatment, the serum levels of cholic acid and taurocholic acid were significantly increased in EE-treated rats. None of the conventional liver tests were significantly different among the four groups. After 14 days of treatment the serum levels of cholic acid, chenodeoxycholic acid, glycocholic acid, glycochenodeoxycholic acid, taurocholic acid, taurochenodeoxycholic acid, bilirubin, alkaline phosphatase and gamma glutamyltransferase were significantly raised in EE and EE plus UDCA treated rats. EE plus TUDCA treated rats, however, had no significant changes in these individual serum bile acids or conventional liver tests. The ultrastructure of livers from EE plus TUDCA treated rats was similar to those of controls. On the other hand, EE and EE plus UDCA rats both showed a significant reduction in sinusoidal microvilli. These results show that treatment of rats for 4 days with EE induces significant rises in the serum concentrations of two individual bile acids and that TUDCA protects against this.(ABSTRACT TRUNCATED AT 250 WORDS)     

A survey of total hydrocyanic acid content in ready-to-eat cassava-based chips obtained in the Australian market in 2008

Cassava (Manihot esculenta Crantz) is a widely consumed food in the tropics that naturally contains cyanogenic glycosides (cyanogens, mainly composed of linamarin, acetone cyanohydrin, and hydrocyanic acid). If cassava is not adequately processed to reduce the level of cyanogens prior to consumption, these compounds can lead to the formation of hydrocyanic acid in the gut. Exposure to hydrocyanic acid can cause symptoms ranging from vomiting and abdominal pain to coma and death. In 2008, a survey of ready-to-eat (RTE) cassava-based snack foods was undertaken to determine levels of cyanogens measured as total hydrocyanic acid. This survey was undertaken in response to the New South Wales Food Authority being alerted to the detection of elevated levels of cyanogens in an RTE cassava-based snack food. This survey took 374 samples of RTE cassava chips available in the Australian marketplace. Significant variation in the levels of total hydrocyanic acid were observed in the 317 samples testing positive for cyanogens, with levels ranging from 13 to 165 mg of HCN equivalents per kg (mean value, 64.2 mg of HCN eq/kg for positive samples). The results from this survey serve as a timely warning for manufacturers of RTE cassava chips and other cassava-based snack foods to ensure there is tight control over the levels of cyanogens in the cassava ingredient. Evidence from this survey contributed to an amendment to the Australia New Zealand Food Standards Code, which now prescribes a maximum level for hydrocyanic acid in RTE cassava chips of 10 mg of HCN eq/kg, which aligns with the Codex Alimentarius Commission international standard for edible cassava flour.     

A fault-tolerant strategy based on SMC for current-controlled converters

The sliding mode control (SMC) is used to control variable structure systems such as power electronics converters. This paper presents a fault-tolerant strategy based on the SMC for current-controlled AC–DC converters. The proposed SMC is based on three sliding surfaces for the three legs of the AC–DC converter. Two sliding surfaces are assigned to control the phase currents since the input three-phase currents are balanced. Hence, the third sliding surface is considered as an extra degree of freedom which is utilised to control the neutral voltage. This action is utilised to enhance the performance of the converter during open-switch faults. The proposed fault-tolerant strategy is based on allocating the sliding surface of the faulty leg to control the neutral voltage. Consequently, the current waveform is improved. The behaviour of the current-controlled converter during different types of open-switch faults is analysed. Double switch faults include three cases: two upper switch fault; upper and lower switch fault at different legs; and two switches of the same leg. The dynamic performance of the proposed system is evaluated during healthy and open-switch fault operations. Simulation results exhibit the various merits of the proposed SMC-based fault-tolerant strategy.     

Segmented OTA Platform Over ICN Vehicular Networks

Mobile Networks and Applications - The Internet Protocol (IP) architecture could not fully satisfy the Vehicular Ad-hoc Networks (VANETs) needed efficiency, due to their dynamic topology and high...     

Changes in Web client access patterns: Characteristics and caching implications

Understanding the nature of the workloads and system demands created by users of the World Wide Web is crucial to properly designing and provisioning Web services. Previous measurements of Web client workloads have been shown to exhibit a number of characteristic features; however, it is not clear how those features may be changing with time. In this study we compare two measurements of Web client workloads separated in time by three years, both captured from the same computing facility at Boston University. The older dataset, obtained in 1995, is well known in the research literature and has been the basis for a wide variety of studies. The newer dataset was captured in 1998 and is comparable in size to the older dataset. The new dataset has the drawback that the collection of users measured may no longer be representative of general Web users; however, using it has the advantage that many comparisons can be drawn more clearly than would be possible using a new, different source of measurement. Our results fall into two categories. First we compare the statistical and distributional properties of Web requests across the two datasets. This serves to reinforce and deepen our understanding of the characteristic statistical properties of Web client requests. We find that the kinds of distributions that best describe document sizes have not changed between 1995 and 1998, although specific values of the distributional parameters are different. Second, we explore the question of how the observed differences in the properties of Web client requests, particularly the popularity and temporal locality properties, affect the potential for Web file caching in the network. We find that for the computing facility represented by our traces between 1995 and 1998, (1) the benefits of using size‐based caching policies have diminished; and (2) the potential for caching requested files in the network has declined. This revised version was published online in August 2006 with corrections to the Cover Date.     

Adaptive toolpath deposition method for laser net shape manufacturing and repair of turbine compressor airfoils

The aim of this research is to develop a geometry-based adaptive toolpath laser powder deposition method for the manufacturing and repair of advanced turbine engine compressor or blisk airfoils. To realize that, the design of experiments (DoE) method was used to study the deposition geometric responses of a single-pass multilayer Inconel 718 laser powder deposition process. In the first step, the processing feasibility domain was quickly explored with a set of screening DoE. The dominating factors, which have significant effects on the deposition bead width and maximum stable layer height, were identified among the various deposition parameters. Based on this result, a more accurate quadratic regression transfer function was developed to predict the deposition bead width as a function of the dominating processing parameters identified in the first step. With the transfer function, deposition toolpath for net shape airfoil fabrication or repair was designed with predetermined bead width, stable layer height, and bead overlap ratios. Adaptive deposition bead widths were obtained by varying the laser power according to the transfer function, so that a constant bead width overlap ratio was maintained. Finally, compressor and blisk airfoils repaired by the geometry-based adaptive toolpath deposition method are demonstrated.     

Peer-assisted content distribution on a budget

In this paper, we propose a general framework and present a prototype implementation of peer-assisted content delivery application. Our system – called Cyclops – dynamically adjusts the bandwidth consumed by content servers (which represents the bulk of content delivery costs) to feed a set of swarming clients, based on a feedback signal that gauges the real-time health of the swarm. Our extensive evaluation of Cyclops in a variety of settings – including controlled PlanetLab and live Internet experiments involving thousands of users – shows a significant reduction in content distribution costs when compared to existing swarming solutions, with a minor impact on the content delivery times.