A PV installation framework concerning electricity variable rates

This paper assesses building integrated photovoltaic (BIPV) installation parameters based on the profit generated by a photovoltaic system. It takes into consideration a home building case study and it investigates its monthly energy demand based on a specific location and a typical occupancy. The capability of a photovoltaic (PV) system to generate more profit occurs when solar intensity is maximum while the electric energy price is at its highest rate. The paper traces a framework that encompasses different aspects such as energy demand, energy price, and solar intensity. This framework identifies profit alternatives according to different installation parameters. A tool that predicts a PV installation hourly electric energy production is developed. The profit generated is simulated for home buildings located in Beirut (Lebanon) and Xihua (China), both at 33.8° latitude north. The paper highlights a new approach for BIPV installations, taking into account weather conditions, energy demand, and electric energy utility rates.     

An in situ TEM study of phase formation in gold-aluminum couples

In the gold wire bonding of aluminum in microelectronic devices the presence of aluminum oxide on the metallization surface may be expected. Electron transparent couples containing an oxide layer at the interface were heated in a TEM to determine the effects of a passivation layer on intermetallic formation. Intermetallic phases were evidenced by changes in sample appearance and their structure was determined by electron diffraction. The presence of an oxide at the interface hindered second phase formation at temperatures at which they were usually expected to form. In aluminum rich couples, the formation of the AuAl₂ intermetallic was not observed to form until about 350°C with the oxide present. In a reverse configuration involving a gold rich couple, an amorphous oxide phase was observed between the Al and the advancing Au₂Al front. The movement of the reaction front appeared to be controlled by surface diffusion across this phase.     

Rooster testicular germ cells and epididymal sperm contain P450 aromatase

We recently found that cytochrome P450 aromatase (P450arom) is present in germ cells of the mammalian testis and is capable of converting androgens to estrogens in the male reproductive tract. The objective of the present study was to determine whether testicular germ cells and epididymal sperm of an avian species are also capable of synthesizing estrogen. P450arom was localized in the rooster testis and epididymal region by immunocytochemistry, using an antiserum generated against purified human placental cytochrome P450arom. Immunostaining was present in pachytene spermatocytes, round spermatids, elongated spermatids, flagella of late spermatids, and sperm in the epididymal region. A positive reaction was also found in nonciliated cells of the epididymal region. However, the absence of mRNA for P450arom in the epididymal region indicated that the immunoreactive protein present in the epididymal region is not synthesized in this region. The immunoreactive P450arom found in epididymal sperm was shown to be active through use of a 3H2O assay. On the basis of these data, we conclude that rooster testicular germ cells and epididymal sperm are sites for the synthesis of estrogen, a potential regulator or modulator of germinal epithelium in the testis and the epithelium of the epididymal region of the avian species.     

Quick simulation of detector error probabilities in the presence ofmemory and nonlinearity

One would like to compare and analyze digital communication systems based upon their overall probability of error. Unfortunately, easily evaluated closed form expressions for these probabilities are almost impossible to derive due to the complexity of the stochastic systems usually encountered. Hence, one must often resort to simulation to obtain the desired quantities. The most obvious technique is Monte Carlo simulation, which directly counts the number of errors in repeated trials. The problem is that error probabilities are usually quite small, requiring numerous simulation runs to sufficiently “hit” the rare event to gain adequate knowledge of its statistics. This places severe demands on the computer's random number generator. Importance sampling strategies simulate under altered input signal distributions (e.g., translation or stretching) so as to “speedup” convergence of the error estimators. The authors discuss a speedup technique termed quick simulation based upon results in large deviation theory. The quick simulation method is shown to compare favorably with three other importance sampling techniques for simulating a simple nonlinear system with memory     

The Effect of Nonuniform Chemistry on Interfacial Fracture Toughness

The adhesion of metallic-ceramic interfaces is generally ascribed to the mixture of several mechanisms, including chemical bonding, texture, strain transfer, and plasticity. This study examines the impact of alterations in chemical bonding along an interface on the nanometer scale on the interfacial fracture energy. Using a well-characterized system of W/SiO₂, small areas of the interface were masked with polymer tubes to prohibit the area from adhering well to the W film. This showed that the interfacial fracture energy was proportional to the area of higher adhesion. This finding was then used to study the growth of a Ti interlayer used for adhesion promotion in a Pt/SiO₂ system. Because the adhesion energy slowly grew from values near the Pt/SiO₂ to values typical of Ti/SiO₂, the growth mechanism for DC magnetron sputtering of thin film Ti on SiO₂ was inferred to be island growth instead of layer-by-layer growth. This article is based on a presentation given in the symposium entitled “Deformation and Fracture from Nano to Macro: A Symposium Honoring W.W. Gerberich’s 70th Birthday,” which occurred during the TMS Annual Meeting, March 12–16, 2006 in San Antonio, Texas and was sponsored by the Mechanical Behavior of Materials and Nanomechanical Behavior Committees of TMS.     

Synthesis and characterization of perfectly alternating polycarbonate‐polydimethylsiloxane multiblock copolymers possessing controlled block lengths

An array of perfectly alternating polycarbonate‐polydimethylsiloxane (PC‐PDMS) multiblock copolymers possessing systematic variations in block molecular weights were successfully produced by coupling preformed PC and PDMS telechelic oligomers using hydrosilylation. Based on gel permeation chromatography results, the multiblock copolymers were essentially void of the oligomeric precursors. Despite the relatively large difference in solubility parameter between PC and PDMS, the multiblock copolymers exhibited significant partial miscibility between the two phases. As expected, the degree of partial miscibility was dependent on the molecular weight of the blocks with the extent of partial miscibility increasing with decreasing block molecular weights. Morphological characterization using small angle X‐ray scattering showed that, at a given PC block molecular weight, the uniformity of the two phase morphology increased with increasing PDMS block molecular weight, which is consistent with a decrease in the extent of phase mixing with increasing PDMS block molecular weight. POLYM. ENG. SCI., 54:1648–1663, 2014. © 2013 Society of Plastics Engineers     

Narrowband auscultatory blood pressure measurement

Auscultatory blood pressure measurement uses the presence and absence of acoustic pulses generated by an artery (i.e., Korotkoff sound), detected with a stethoscope or a sensitive microphone, to noninvasively estimate systolic and diastolic pressures. Unfortunately, in high noise situations, such as ambulatory environments or when the patient moves moderately, the current auscultatory blood pressure method is unreliable, if at all possible. Empirical evidence suggests that the pulse beneath an artery occlusion travels relatively slow compared with the speed of sound. By placing two microphones along the bicep muscle near the brachial artery under the occlusion cuff, a similar blood pressure pulse appears in the two microphones with a relative time delay. The acoustic noise, on the other hand, appears in both microphones simultaneously. The contribution of this paper is to utilize this phenomenon by filtering the microphone waveforms to create spatially narrowband information signals. With a narrowband signal, the microphone signal phasing information is adequate for distinguishing between acoustic noise and the blood pressure pulse. By choosing the microphone spacing correctly, subtraction of the two signals will enhance the information signal and cancel the noise signal. The general spacing problem is also presented.     

Failure Strains in Micromachined Piezoelectric Membranes

Abstract:  The strain at failure was investigated for micromachined lead zirconate titinate (PZT) piezoelectric membranes. The effect of microcracking in the PZT films was overshadowed by the support layers present in the devices. Bare Si membranes achieved the highest strain at failure, 0.49% with the pressure applied to the back side of the membranes compared to Si/SiO₂ and composite PZT membrane structures. Variation in the volume of PZT that was strained and the side length of the composite membranes did not decrease the strain at failure. In addition, the materials utilised in the composite structure for the bottom electrode material and PZT chemistry were investigated and the strain at failure levels was effectively the same for each material system. Composite structures with significantly different levels of effective residual stress failed at applied strains of up to 0.2%. This paper details each of the tests that were performed and the results obtained.