Interaction of inositol phosphate with calcite

The interaction of myo-inositol hexaphosphate with calcite was studied to evaluate the adsorption mechanisms and the electrochemical modifications induced by interaction of a molecule at such a high-charge density. In addition to quantitative information through the construction of adsorption isotherms, FT-IR and Laser Doppler Velocimetry - Photon Correlation Spectroscopy (LDV-PCS) were employed to investigate the nature of the adsorbent-adsorbate bonds and to determine the electrophoretic mobility and size of the particles before and after sorption. The experiments were also run with orthophosphate (Pi) for comparison. The amount of sorbed P increased to reach a plateau at 17.8 mol m^-2 for inositol hexaphosphate (IHP) while for Pi rose 1.4 mol m^-2 but at C_e > 610^-4 M it had a sharp increase reaching 155 mol m^-2. As expected, for Pi, adsorption predominated up Ce 610^-4 M by covering about 20% of total surface. The adsorption occurred at sites that behaved as nucleus of formation of the clustering of Ca- and PO₄-ions with the ending formation of calcium phosphate precipitates at C_e higher than 610^-4 M. The reaction of inositol hexaphosphate with calcite involves, besides adsorption, precipitation of Ca salts and hence calcite dissolution also at the lowest added IHP concentrations, accounting for the large amount retained by calcite. Sorption of IHP on calcite caused aggregation of particles at low concentrations followed by an increase of their negative charge and hence re-dispersion at higher concentrations. These results indicate a great IHP-fixing capacity of calcite that can affect its accumulation in soils and P bioavailability, and a considerable change of calcite electrochemical properties and particle size distribution that can modify aggregate stability.     

Local impairment of immunoreactivity in HIV-infected women with HPV-related squamous intraepithelial lesions of the cervix

The effect on the nasopharyngeal bacterial flora of therapy for 10 days with co-amoxiclav or cefprozil was studied in 50 children with acute otitis media. Before therapy, potential pathogens (Streptococcus pneumoniae, Haemophilus influenzae and Moraxella catarrhalis) were isolated in 14 (56%) of those treated with co-amoxiclav and 15 (60%) of those treated with cefprozil. Following therapy, the reduction in the number of these pathogens was the same in the two groups. However, differences between the groups were noted in the recovery of organisms with interfering capability, namely alpha-haemolytic streptococci, Peptostreptococcus anaerobius and Prevotella melaninogenica. Fifty interfering organisms were recovered from each group before therapy. After therapy with co-amoxiclav or cefprozil their number declined to 11 and 42, respectively (P< 0.001).     

Biomedical Instrumentation for the Measurements of Skin Sensitivity

This paper reports on the development of two techniques designed to measure the electric responses to periodic tactile and thermal0 stimuli on the skin of the hand.     

Maximum volumetric production of β‐galactosidase by Kluyveromyces fragilis in fed‐batch culture with automatic control

The production of β‐galactosidase by Kluyveromyces fragilis was studied in different culture systems, with dissolved oxygen concentration control and using defined media. An operating strategy of fed‐batch culture with automatic control of substrate addition regulated by dissolved oxygen concentration, consisting of the replacement of variable volumes of broth by fresh medium (once the fed‐batch culture has finished), was designed. The volumetric enzyme productivity (Q_p, 13 600 UI dm^?3 h^?1) obtained was 38% higher than that reached in continuous culture of K fragilis with dissolved oxygen concentration control and far higher than that obtained by batch culture of K fragilis under the same aeration conditions. © 2002 Society of Chemical Industry     

Formulation of muds for pelotherapy: effects of “maturation” by different mineral waters

Spa centres in northern Italy use clayey admixtures for the formulation of muds to be used in pelotherapy. The basic ingredient (“virgin” clay) is a dressed bentonitic geomaterial with mineralogical composition: smectite 60–70%, illite 5–10%, kaolinite 10–15%, quartz 5–10%, calcite 5–10% and feldspars 2–3%.The peloid muds are obtained by “maturation” of the virgin clay with mineral waters gushing out in situ which have different geochemistry: sulphureous, Ca-sulphate, Ca–Mg-sulphate and Br–I-salty (after the Italian regulation DPR 105/92). The maturation treatment is varying with respect to the mixing procedure and lasting time.Peculiar parameters have been tested to verify the effects of various maturation treatments, i.e., changes with respect to virgin clay.Formation of organic matter is due to the presence of microorganisms and algae in the maturation habitat. The <2 μm fraction is generally decreased due to clay particles agglomeration. Mineralogical changes are mainly concerning the degradation of clay minerals, as smectite and illite, and subordinately to the dissolution of calcite. Cation exchange capacity (CEC), soluble salts, water retention, swelling index, activity, consistency parameters (WL, WP and PI), thermal behaviour and cooling kinetics are influenced by the geochemistry of mineral waters used for the maturation treatments but with some opposite trends for Br–I-salty water, and for sulphureous and Ca-sulphate waters, respectively.Noteworthy was the influence of high-pH value of the virgin clay on the pH of peloid muds (in fact, the pH of the used mineral waters is ranging around the natural value). Furthermore, the temperature reached by the peloid muds after 20 min of application (calculated after an innovative mathematical model) is influenced by water retention. An increase in plasticity index and a slower cooling are considered to improve the quality of the obtained peloid muds for pelotherapy.The observed different cation exchange behaviour and soluble salt content could be discriminant for either dermatological masks or thermal body cataplasms.A need of regulation (standard procedures) is suggested to certificate the clay geomaterials suitable for pelotherapy and also for drugs formulation.     

Searching potential candidates for development of protective cultures: Evaluation of two Lactobacillus strains to reduce Listeria monocytogenes in artificially contaminated milk

The aims of this work were (a) to select the minimum concentrations of two bacteriocin-producing lactobacilli strains to reduce Listeria monocytogenes growth in whole milk, (b) to evaluate the individual and combined application of these chosen lactobacilli concentrations as protective culture in this food and, (c) to estimate if lactobacilli growth caused undesirable changes in the visible characteristics of milk. The selected minimum lactobacilli concentration with antilisterial activity was 10⁶ CFU ml⁻¹ for both lactobacilli. Although a high initial concentration of L. monocytogenes (10⁴ CFU ml⁻¹) was added to milk, a notable reduction on listerial counts (2–4 log CFU ml⁻¹) was achieved in comparison to the control. These lactobacilli showed a good adaptability in milk reaching optimal counts and not causing undesirable visible changes. In conclusion, the use of these lactobacilli could be considered as a bio-strategy potentially effective to limit the contamination by L. monocytogenes in certain milk-derived products.     

Research note: Effect of dissolved oxygen level on lactase production by Kluyveromyces fragilis

The influence of dissolved oxygen (% DO) on lactase production by Kluyveromyces fragilis (NRRL-Y-1109) in chemostat culture using a defined medium was studied. The aim was to determine conditions for both high specific enzyme activity and high volumetric enzyme productivity. Significant differences in the specific enzyme activity and specific and volumetric enzyme productivity were found at the corresponding steady states when the DO was varied between 0 and 90%. Maximum lactase production was attained at 10% DO. Under this condition the best results were an enzyme activity of 5910 IU g⁻¹, specific production rate of 1810 IU g⁻¹ h⁻¹ and volumetric production rate of 1530 IU dm⁻³ h⁻¹. This seem to be due to the fact that at low aeration conditions the yeast metabolism is more reductive and as a consequence it verifies both higher specific lactose consumption rate and higher enzyme expression than in full aeration conditions. The results of this investigation are also compared with those of other studies of lactase production by Kluyveromyces sp. © 1998 Society of Chemical Industry