Phase behavior of polycarbonate blends with selected halogenated polymers

Bisphenol A polycarbonate is shown to be miscible with a vinylidene chloride based polymer containing 13.5% by weight of vinyl chloride. On the other hand, polycarbonate is found to be immiscible with poly(vinyl chloride), poly(vinylidene fluoride), and polyepichlorohydrin.     

Collaborative test of determination of iodine value in fish oils. 1. Reaction time and carbon tetrachloride or cyclohexane as solvents

Twenty-two laboratories participated in a collaborative test to determine the iodine value (IV) of eight samples of fish oil (four with IV<150, four with IV>150) with either carbon tetrachloride (AOCS Official Method Cd 1–25) or cyclohexane (AOCS Recommended Practice Cd 1b-87) as solvent and either 1 or 2 h of reaction time. Laboratories received coded duplicate samples (hidden duplicates) and carried out duplicate determinations on each oil by each solvent-time combination (open duplicates). Replacing carbon tetrachloride with cyclohexane resulted in a lower IV (P<0.001). The decrease averaged 1.6 IV units for low-IV oils and 3.8 IV units for high-IV oils; this difference in response of 2.2 IV units between low- and high-IV oils was significant (P<0.001). Increasing the reaction time had a relatively small effect (0.34±0.18). There was no interaction of reaction time with solvent or oil type. Cyclohexane caused emulsions, which made it difficult to titrate residual iodine and thus increased the variability of the determination. The repeatability standard deviations (s _r ), based on hidden duplicates, for 1-h reaction time with carbon tetrachloride and cyclohexane were 2.17 and 3.35, respectively. The corresponding reproducibility standard deviations were 2.73 and 4.53.     

Chemistry of miscible polycarbonate–copolyester blends

Blends of polycarbonate and the copolyester based on 1,4-cyclohexanedimethanol and a mixture of terephthalic and isophthalic acids are known to be completely miscible. This study was concerned with various chemical events which may occur in this system, particularly during melt processing. Degradation reactions were studied by both TGA and dilute viscometry techniques, and some indications of component interaction were noted. The residual titanium catalyst from the copolyester formation was found to produce color formation by interaction with phenolic end groups in the polycarbonate and to promote interchange reactions. Both events could be suppressed by deactivation of the residual catalyst with appropriate additives. An indication of the extent of interchange reactions was obtained by following the crystallizability of the copolyester component using differential scanning calorimetry.     

Measurement of the PVT behavior of cis-1,4-polybutadiene

The volume of cis-1,4-polybutadiene between 5 and 55°C and 1 and 3000 atmospheres was measured to within a relative error of 0.1 percent with an especially developed, bellows-type dilatometer. The presence of a small transition near 55°C was indicated by analysis of the data and confirmed by differential thermal analysis.     

Phase behavior of blends of aliphatic polyesters with a vinylidene chloride/vinyl chloride copolymer

A series of aliphatic polyesters having CH₂/COO ratios from 2 to 14 in their repeat units were blended with a copolymer of vinylidene chloride containing 13.5% by weight of vinyl chloride. Blends of polyesters having CH₂/COO < 4 did not form completely miscible amorphous phases, whereas polyesters having CH₂/COO ≥ 4 did form completely homogeneous amorphous phases for all temperatures below the decomposition point except for the polyester with CH₂/COO = 14 which showed reversible phase separation on heating, i.e., lower critical solution temperature behavior. Interaction parameters were estimated by melting point depression and by analog calorimetry. The behavior reported here is qualitatively similar to that reported earlier for blends of aliphatic polyesters with poly(vinyl chloride), polyepichlorohydrin, polycarbonate, styrene–allyl alcohol copolymers, and the hydroxy ether of bisphenol A.     

Polyester–polycarbonate blends. V. Linear aliphatic polyesters

Polycarbonate blends with the linear aliphatic polyesters poly(ethylene succinate) (PES), poly(ethylene adipate) (PEA), poly(1,4-butylene adipate) (PBA), and poly(hexamethylene sebacate) (PHS) were prepared by solution casting. Blends containing PES, PEA, and PBA exhibited a single T_g by DSC and thus form a single, miscible amorphous phase with polycarbonate. However, blends containing PHS exhibited only partial miscibility. Crystallinity of the polyesters was reduced by mixing with polycarbonate; however, plasticization by the polyesters induced crystallization of the polycarbonate. Miscibility in these systems is the result of an exothermic heat of mixing stemming from an interaction of the carbonyl dipole of the ester group with the aromatic carbonate. The effect of polyester structure on miscibility with polycarbonate is interpreted by and correlated with heats of mixing obtained by direct calorimetry of low molecular weight liquid analogs of the polymers.     

Phase behavior for blends of styrene containing triblock copolymers with poly(2,6-dimethyl-1,4-phenylene oxide)

The extent to which the styrene end-blocks of three commercially available triblock copolymers can mix with a particular poly(2,6-dimethyl-1,4-phenylene oxide) (M_n = 22,600 and M_w = 34,000) or PPO has been examined by investigation of the glass transition behavior of the PPO and polystyrene (PS) portions of the blends using differential scanning calorimetry. Each block copolymer has a butadiene-based mid-block which was hydrogenated for two of these materials, but not the third. The three copolymers differ substantially in overall molecular weight and in molecula weight of the blocks. However, in analogy with the literature on blends of homopolymer polystyrene with styrene-based block copolymers, the molecular weight of the PS block should be the principal factor affecting the phase behavior in the present blends. Mixtures of the PPO with the block copolymers having PS blocks with M = 14,500 (nonhydrogenated midblock) and with M = 29,000 (hydrogenated mid-block) exhibited single composition-dependent T_gs for the hard phase, indicating complete mixing of PS segments with the PPO, for all proportions. On the other hand, the block copolymer having a PS block with M = 7,500 and a hydrogenated mid-block exhibited two separate hard phase T_gs corresponding to an essentially pure PPO phase and a PS-rich phase. For blends of homopolymer PS with styrene-based block copolymers, the similar two-phase behavior of the glassy portion can be readily explained by entropic considerations. For the present case, the favorable enthalpic contribution for mixing PPO and PS is an additional factor which seems to influence the restrictions on molecular weight for complete mixing; however, additional work is needed to develop a more quantitative assessment of this new issue.     

Intraneuronal information processing, directional selectivity and memory for spatio-temporal sequences

Interacting intracellular signalling pathways can perform computations on a scale that is slower, but more fine-grained, than the interactions between neurons upon which we normally build our computational models of the brain (Bray D 1995 Nature 376 307-12). What computations might these potentially powerful intraneuronal mechanisms be performing? The answer suggested here is: storage of spatio-temporal sequences of synaptic excitation so that each individual neuron can recognize recurrent patterns that have excited it in the past. The experimental facts about directionally selective neurons in the visual system show that neurons do not integrate separately in space and time, but along straight spatio-temporal trajectories; thus, neurons have some of the capacities required to perform such a task. In the retina, it is suggested that calcium-induced calcium release (CICR) may provide the basis for directional selectivity. In the cortex, if activation mechanisms with different delays could be separately reinforced at individual synapses, then each such Hebbian super-synapse would store a memory trace of the delay between pre- and post-synaptic activity, forming an ideal basis for the memory and response to phase sequences.