Effect of Boronizing on Operating Stability of Steel AISI 304L under Erosion Impact of Hard Particles

Metal Science and Heat Treatment - The effect of solid boronizing at 950°C for 2 and 4 h on the phase composition, microstructure, hardness and abrasive wear of steel AISI 304L is studied...     

A new boundary finite element method for fluid–structure interaction problems

In order to study problems on fluid–structure interaction, we have used a mixed formulation which couples the classical functional of the structure with a new variational formulation by integral equations for the fluid. This formulation has the advantage over the finite element methods of avoiding the discretization of the fluid domain. Furthermore, unlike collocation methods, the explicit calculation of the Hadamard finite part of the singular integrals is avoided. This leads after discretization by boundary finite elements to a small and symmetrical algebraic system. Typical examples are presented that demonstrate the efficiency of this variational formulation by studying the sound transmission through a baffled plane structure and through a flexible panel backed by a rigid cavity. These include the calculation of the transmission loss factor and the determination of which modes dominate the noise transmission. Good agreement is obtained between numerical results and analytical results found in the literature.     

Interference characterization in the unlicensed band

We consider performance of a wireless communication receiver in the presence of a field of continuous wave (CW) interferers that are randomly distributed according to a Poisson process in space and frequency domain in the unlicensed band. From our theoretical model, we derive an accurate analytical expression for average bit error rate (BER). Judging from our results for a strong desired signal, when the user density grows up to ten times its value for a given signal to noise ratio (SNR), BER performance falls by 9.09% and 8.51 % for BPSK and DPSK respectively.     

Shear mode coupling and tilted grain growth of A1N thin films in BAW resonators.

Polycrystalline A1N thin films were deposited by RF reactive magnetron sputtering on Pt(111)/Ti electrode films. The substrates were tilted by an angle ranging from 40 degrees to 70 degrees with respect to the target normal. A low deposition temperature and a high sputter gas pressure were found ideal for tilted growth. The resulting grain tilt angle amounts to about half the substrate tilt angle. For coupling evaluation, 5 GHz solidly mounted resonator structures have been realized. The tilted grain A1N films exhibited a permittivity in the 9.5-10.5 range and loss tangent of 0.3%. Two shear modes as well as the longitudinal mode could be clearly identified. The coupling coefficient k2(eff) of the fundamental thickness shear mode (TS0) was found to be about 0.5%, which is compatible with a c-axis tilt of about 6 degrees.     

A novel energy-efficient encryption algorithm for secure data in WSNs

The Journal of Supercomputing - Wireless sensor networks (WSNs) are typically deployed environments, often very hostile and without assistance. A certain level of security must be provided....     

Rheological behaviour of polysaccharide aqueous solutions

Several data relative to the viscosity of water-soluble polysaccharide solutions were collected from the literature and processed by different rheological models. Some relationships between the viscosity of these polymer solutions, their molecular weight and their solution concentrations, were established and their validity checked. Thus, an accurate equation correlating the viscosity and both the shear rate and the solution concentration of different water soluble polysaccharides (xanthan, hyaluronan, carboxymethylcellulose) was deduced on the basis of Cross' model which suggests two domains in which the viscosity is constant, i.e. very low and very high shear rate ranges. Then, an expression relating the zero-shear viscosity (A) and the concentration of their solutions was proposed. Finally, an alternative equation to that of Mark–Houwink correlating the molecular weight and the intrinsic viscosity of the water-soluble polysaccharides studied in this paper was found.     

Robust control of T‐S fuzzy systems with time‐varying delay using new approach

This paper aims to design a controller to robustly stabilize uncertain nonlinear systems with time‐varying delay and norm bounded uncertainties via Takagi–Sugeno (T‐S) fuzzy model. The stabilization conditions are given in the form of linear matrix inequalities using a single Lyapunov–Krasovskii functional (LKF) combining the introduction of some relaxation matrices and only one tuning parameter. In comparison with the existing techniques in the literature, the proposed approach has two major advantages. The first is the reduction of computational complexity when the number of IF‐THEN rules, r, is big. The second concerns the conservatism reduction. Several examples are given to show the effectiveness and the merits of the design procedure. Copyright © 2009 John Wiley & Sons, Ltd.     

Evidence for internal phosphorus loading,hypoxia and effects on phytoplankton in partially polymictic Lake Simcoe,Ontario

Hypoxia and cyanobacterial blooms were extensive in Lake Simcoe during the 1980s and are still a problem to a lesser degree despite extensive nutrient load reduction from the catchment basin. The continuing signs of productivity indicate a potential internal phosphorus (P) source. Internal P load, as a redox-dependent release from bottom sediments, is hard to determine in a large, relatively shallow and partially unstratified lake such as Lake Simcoe. Of the lake's three major basins, only Kempenfelt Bay stratifies long enough to develop hypoxia in the stagnant summer hypolimnion. The following indications of sediment P release are available from historic data: 1) hypolimnetic hypoxia still occurs in Kempenfelt Bay although the hypoxic factor (number of days that an area equal to the bay's surface area is overlain by water of ≤ 2 mg/L dissolved oxygen, DO) has decreased substantially and significantly from 15.8 d/yr (1980–1994) to 4.0 d/yr (1995–2011); 2) hypoxic factors for other lake sections and at different DO levels also indicate widespread hypoxia; 3) concentrations of redox dependent metals, Fe and Mn, increase with depth; and 4) euphotic zone P and chlorophyll concentrations increase and water clarity decreases during fall turnover. Cyanobacterial blooms appear to occur in response to internal load as supported by occasional cyanobacteria counts. These indicators provide evidence that internal loading is likely occurring and affecting the water quality in Lake Simcoe. We expect that further monitoring, specific for internal load, will corroborate these results.     

Local Convergence of the Lavrentiev Method for the Cauchy Problem via a Carleman Inequality

The purpose is to perform a sharp analysis of the Lavrentiev method applied to the regularization of the ill-posed Cauchy problem, set in the Steklov-Poincaré variational framework. Global approximation results have been stated earlier that demonstrate that the Lavrentiev procedure yields a convergent strategy. However, no convergence rates are available unless a source condition is assumed on the exact Cauchy solution. We pursue here bounds on the approximation (bias) and the noise propagation (variance) errors away from the incomplete boundary where instabilities are located. The investigation relies on a Carleman inequality that enables enhanced local convergence rates for both bias and variance errors without any particular smoothness assumption on the exact solution. These improved results allows a new insight on the behavior of the Lavrentiev solution, look similar to those established for the Quasi-Reversibility method in [Inverse Problems 25, 035005, 2009]. There is a case for saying that this sort of ??super-convergence?? is rather inherent to the nature of the Cauchy problem and any reasonable regularization procedure would enjoy the same locally super-convergent behavior.