This work presents a complete bond graph modeling of a hybrid photovoltaic-fuel cell-electrolyzer-battery system. These are multi-physics models that will take into account the influence of temperature on the electrochemical parameters. A bond graph modeling of the electrical dynamics of each source will be introduced. The bond graph models were developed to highlight the multi-physics aspect describing the interaction between hydraulic, thermal, electrochemical, thermodynamic, and electrical fields. This will involve using the most generic modeling approach possible for managing the energy flows of the system while taking into account the viability of the system. Another point treated in this work is to propose. In this work, a new strategy for the power flow management of the studied system has been proposed. This strategy aims to improve the overall efficiency of the studied system by optimizing the decisions made when starting and stopping the fuel cell and the electrolyzer. It was verified that the simulation results of the proposed system, when compared to simulation results presented in the literature, that the hydrogen demand is increased by an average of 8%. The developed management algorithm allows reducing the fuel cell degradation by 87% and the electrolyzer degradation by 65%. As for the operating time of the electrolyzer, an increment of 65% was achieved, thus improving the quality of the produced hydrogen. The Fuel Cell's running time has been decreased by 59%. With the ambition to validate the models proposed and the associated commands, the development of this study gave rise to the creation of an experimental platform. Using this high-performance experimental platform, experimental tests were carried out and the results obtained are compared with those obtained by simulation under the same metrological conditions. 相似文献
Wireless Personal Communications - This paper presents an analytical investigation on the effect of nonlinear high-power amplifiers on the physical layer security of multiple-input-multiple-output... 相似文献
A pilot plant of biomass pyrolysis using pyrolysis products as fuel has been tested and shown to improve energy balance of the process and to be environmentally friendly by avoiding rejection of pyrolysis pollutants fumes into the atmosphere. The high number of parameters involved in a pyrolysis process makes it difficult to specify an optimum procedure for charcoal yield and pyrolysis cycle durability. So the knowledge of the essential parameters which govern the kinetics mechanisms of the biomass thermal decomposition and the combustion of pyrolysis gases is very useful to understand the operating cycle of the plant. In the present study a thermochemical model is developed in order to simulate and control the operating cycle of the system. The effect of the inlet molar air flow rate on the temporal evolution of biomass mass loss rate and temperatures in the different active zones of the pilot plant as well as the determination of the critical inlet molar air flow rate for which accidental runaway of combustion reactions occurs are presented. To avoid this accidental phenomenon a Proportional-Integral-Derived (PID) anticipated regulation is used in order to control temperatures evolution in the different zones of the device and avoid the runaway of combustion reactions. 相似文献
This paper presents ADR-SPLDA, an unsupervised model for human activity discovery and recognition in pervasive environments. The activities are encoded in sequences recorded by non-intrusive sensors placed at various locations in the environment. Our model studies the relationship between the activities and the sequential patterns extracted from the sequences. Activity discovery is formulated as an optimization problem in which sequences are modeled as probability distributions over activities, and activities are, in turn, modeled as probability distributions over sequential patterns. The optimization problem is solved by maximization of the likelihood of data. We present experimental results on real datasets gathered in smart homes where people perform various activities of daily living. The results obtained demonstrate the suitability of our model for activity discovery and characterization. Also, we empirically demonstrate the effectiveness of our model for activity recognition by comparing it with two of the widely used models reported in the literature, the Hidden Markov model and the Conditional Random Field model. 相似文献
This paper presents a numerical study about the performance of a Beta Stirling solar thermal engine system. This system is composed of a solar collector box connected to a regenerator hydraulic system and a transmitting power system. The objective of the system is to offer a new alternative to help solving stagnant water pollution in hot countries like Thailand by circulating water in canals, lakes, ponds etc. for aeration using solar energy.The purpose of this study is to determine the power output and actual heat transfer on the performance of the solar thermal engine. The solar thermal engine is analyzed using a mathematical model based on the first law of thermodynamics for processes with finite speed, with particular attention to the energy balance at the receiver. The result of calculations showed that the regenerator volume and phase angle must be chosen carefully to fulfill the requirement that total fluid mass in the system is constant and to obtain maximum power output throughout the day. 相似文献
Aquivion membrane displays improved properties as compared to Nafion membrane, partly due to shorter side chains. However, some improvements are still necessary for proton exchange membrane fuel cell to operate at low relative humidity. To overcome this drawback, the addition of clay nanoparticle into the Aquivion matrix can be considered. In this study, different composite membranes have been prepared mixing short-side-chain PFSA (perfluorosulfonic acid) Aquivion and selectively modified halloysite nanotubes for PEMFC low relative humidity operation. Halloysites were grafted with fluorinated groups, sulfonated groups, or perfluoro-sulfonated groups on inner or outer surface of the tubes. The obtained composite membranes showed improved properties, especially higher water uptake associated with reduced swelling and better mechanical strength compared to pristine Aquivion membrane and commercially available Nafion HP used as reference. The best performance in this study was obtained with Aquivion loaded with 5 wt% of pretreated perfluoro-sulfonated halloysite. The composite membrane, referred to as Aq/pHNT-SF5, displayed the largest water uptake and proton conductivity among the panel of membranes tested. The chemical stability was not affected by the presence of halloysite in the Aquivion matrix.
Life cycle assessment (LCA) is an environmental assessment tool generally applied to products but also to processes. Features of the LCA of processes are presented in this paper. This approach was used to compare two flue gas cleaning processes: the typical wet-type process and the new transported droplets column process. The LCA result shows that the global environmental burden is similar between the two processes, which confirms the viability of the transported droplets column. The distribution of the environmental burden, however, is different between the two processes. The weak points of the transported droplets column are the pollution transfer from air to water and a larger volume to stabilize. Its strong point: it is more efficient in capturing dust particles and toxic pollutants. This process could be improved from an environmental standpoint by adding an electrostatic filter upstream of the transported droplets column to capture the particles. The laboratory results of the transported droplets column need, however, to be confirmed at a larger scale. 相似文献
The purpose of this study was to control the fabrication of new labile supramolecular assemblies by formulating associations of DNA molecules with inorganic layered double hydroxides (LDHs). The results show that LDH/DNA hybrids synthesized by a coprecipitation route involving the in situ formation of LDHs around DNA molecules acting as templates were characterized by a lamellar organization, with DNA molecules sandwiched between hydroxide layers, exhibiting a regular spacing of 1.96 nm. Our results indicate that labile complexes resulting from the association of nucleic acids and inorganic materials can be obtained not only by anion exchange but also by a direct self-assembly route. 相似文献