Effect of Bonder at Skin/Core Interface on the Mechanical Performances of Sandwich Structures Used in Marine Industry

The present work is aimed to extend the knowledge of mechanical properties of sandwich structures used for marine applications focusing on the possibility to increase the performances of such structures by adding a bonder at the skin/core interface. Therefore, three sandwich structures that are utilised in different structural components of a yacht were realised by manual lay-up. The mechanical characterisation was performed by flatwise compressive, edgewise compressive and three point flexural tests. The tests execution has allowed both to determine the mechanical performances and to understand the fracture mechanisms that take place when the bonder is added in the stacking sequence of the samples.     

The principle of guarantee availability for security protocol analysis

Conformity to prudent design principles is an established approach to protocol correctness although it is not free of limitations. We term goal availability a design principle that is often implicitly followed, prescribing protocols to aim at principal-centric goals. Adherence to a design principle is normally established through protocol analysis that is an evaluation of whether a protocol achieves its goals. However, the literature shows that there exists no clear guidance on how to conduct and interpret such an analysis, a process that is only left to the analyzer’s skill and experience. Goal availability has the desirable feature that its supporting protocol analysis can be precisely guided by what becomes a principle of realistic analysis, which we call guarantee availability. It prescribes that the outcome of the analysis, which is the set of guarantees confirming the protocol goals, be practically applicable by the protocol participants. In consequence, the guarantees must be based on assumptions that the principals have the capacity to verify. Our focus then turns entirely to protocol analysis, because an analysis conforming to guarantee availability signifies that the analyzed protocol conforms to goal availability. Existing analysis of (both classical and deployed) protocols has been reconsidered with the aim of studying their conformity to guarantee availability. Some experiments clarify the relationships between goal availability and the existing design principles, with particular reference to explicitness. Other experiments demonstrate that boosting an analysis with guarantee availability generally makes it deeper, unveiling additional protocol niceties that depending on the analyzer’s skills may remain overseen otherwise. In particular, an established claim about a protocol (made using a well-known formal method) can be subverted.     

An integrated computer-controlled system for assisting researchers in cortical excitability studies by using transcranial magnetic stimulation

Transcranial magnetic stimulation (TMS) is the most important technique currently available to study cortical excitability. Additionally, TMS can be used for therapeutic and rehabilitation purposes, replacing the more painful transcranial electric stimulation (TES). In this paper we present an innovative and easy-to-use tool that enables neuroscientists to design, carry out and analyze scientific studies based on TMS experiments for both diagnostic and research purposes, assisting them not only in the practicalities of administering the TMS but also in each step of the entire study's workflow. One important aspect of this tool is that it allows neuroscientists to specify research designs at will, enabling them to define any parameter of a TMS study starting from data acquisition and sample group definition to automated statistical data analysis and RDF data storage. It also supports the diagnosing process by using on-line support vector machines able to learn incrementally from the diseases instances that are continuously added into the system. The proposed system is a neuroscientist-centred tool where the protocols being followed in TMS studies are made explicit, leaving to the users flexibility in exploring and sharing the results, and providing assistance in managing the complexity of the final diagnosis. This type of tool can make the results of medical experiments more easily exploitable, thus accelerating scientific progress.     

Geometry and Stacking Sequence Effect on Composite Spinnaker Pole's Stiffness: Experimental and Numerical Analysis

Composite materials are widely employed in sailing sports, a possible application is for the mast pole or other sail poles. In the paper the attention is focused on the spinnaker poles mechanical performances; in particular the focus is on axial and ring compressive properties of three different carbon fibre/epoxy resin spinnaker poles, to investigate both the diameter and stacking sequence effect on the mechanical performance of the structure. Starting from the stacking sequence used in the production of a particular spinnaker pole, the effect of a lamina at 0° in the middle of wall thickness is investigated with the purpose to obtain a more stiff structure. Moreover to test the proposed stacking sequence on different size products, a prototype with lower diameter is realized. To properly evaluate axial and ring stiffness, axial compression test and ring stiffness one are performed. Then a numerical model is developed to support the design of the finished product: A simple and versatile numerical analysis (FEA with software ANSYS), by simulating ring stiffness and pull-direction compression tests, is carried out in elastic regime. Such model should be suitable for designing and/or verifying the mechanical performance of pole structures, even though differing from those above described, for materials, geometry and stacking sequence.     

Structural transformation in Mn-substituted Sr2Bi2Ta2TiO12 Aurivillius phase synthesized by hydrothermal method: A comparative study and dielectric properties

In this study, a hydrothermal method was applied to synthesize the three-layer Aurivillius phase Sr₂Bi₂Ta₂TiO₁₂ (SBTTO) and Mn-substituted Sr_1·5Bi_2·5Ta₂Ti_0·5Mn_0·5O₁₂ (SBTTMO), with the use of NaOH as a mineralizer. The crystal structure, morphology, dielectric properties, and the correlation between the structural transformation and dielectric properties were investigated. The XRD data reveal that the SBTTO sample adopts a tetragonal crystal structure with the I4/mmm space group and is then transformed into an orthorhombic structure with the B2cb space group for SBTTMO. The morphology of both samples was observed by SEM, which showed anisotropic plate-like grains. With the Mn substitution, the ferroelectric transition temperature (T_c) significantly increases as the influence of the 6s² lone pair of Bi³⁺ increases, and this in turn further induces the relaxor-ferroelectric behavior. Consequently, the increase in T_c confirms the structural transformation from the paraelectric-tetragonal to the ferroelectric-orthorhombic phase.     

Targeting Serotonin 2A and Adrenergic α1 Receptors for Ocular Antihypertensive Agents: Discovery of 3,4‐Dihydropyrazino[1,2‐b]indazol‐1(2H)‐one Derivatives

Glaucoma affects millions of people worldwide and causes optic nerve damage and blindness. The elevation of the intraocular pressure (IOP) is the main risk factor associated with this pathology, and decreasing IOP is the key therapeutic target of current pharmacological treatments. As potential ocular hypotensive agents, we studied compounds that act on two receptors (serotonin 2A and adrenergic α₁) linked to the regulation of aqueous humour dynamics. Herein we describe the design, synthesis, and pharmacological profiling of a series of novel bicyclic and tricyclic N2‐alkyl‐indazole‐amide derivatives. This study identified a 3,4‐dihydropyrazino[1,2‐b]indazol‐1(2H)‐one derivative with potent serotonin 2A receptor antagonism, >100‐fold selectivity over other serotonin subtype receptors, and high affinity for the α₁ receptor. Moreover, upon local administration, this compound showed superior ocular hypotensive action in vivo relative to the clinically used reference compound timolol.     

Control of Polymer Composition in Pd‐Catalyzed CO/Olefin Terpolymerization Reactions

The CO/tert‐butylstyrene/ethylene terpolymerization catalyzed by Pd‐(N‐N′) complexes was studied. The results evidence that the olefin preferentially inserted in the terpolymer chain is strictly related to the nature of the nitrogen ligand, mainly to its steric constraints, and not to the kind of ligand. Indeed, slight variations in the backbone of the nitrogen ligands coordinated to palladium allow for the synthesis of terpolymers with a controlled composition.     

A New Design Paradigm for Smart Windows: Photocurable Polymers for Quasi‐Solid Photoelectrochromic Devices with Excellent Long‐Term Stability under Real Outdoor Operating Conditions

A new photoelectrochromic device (PECD) is presented in this work proposing the combination of a WO₃‐based electrochromic device (ECD) and a polymer‐based dye‐sensitized solar cell (DSSC). In the newly designed architecture, a photocurable polymeric membrane is employed as quasi‐solid electrolyte for both the ECD and the DSSC. In addition, a photocurable fluoropolymeric system is incorporated as solution‐processable external protective thin coating film with easy‐cleaning and UV‐shielding functionalities. Such new polymer‐based device assembly is characterized by excellent device operation with improved photocoloration efficiency and switching ability compared with analogous PECDs based on standard liquid electrolyte systems. In addition, long‐term (>2100 h) stability tests under continuous exposure to real outdoor conditions reveal the remarkable performance stability of this new quasi‐solid PECD system, attributed to the protective action of the photocurable fluorinated coating that effectively prevents photochemical and physical degradation of the PECD components during operation. This first example of quasi‐solid PECD systems paves the way for a new generation of thermally, electrochemically, and photochemically stable polymer‐based PECDs, and provides for the first time a clear demonstration of their true potential as readily upscalable smart window components for energy‐saving buildings.