Adaptive infill sampling criterion for multi-fidelity optimization based on Gappy-POD

This paper presents a reformulation of the “Gappy Proper Orthogonal Decomposition” (Gappy-POD) multi-fidelity modeling approach and proposes an enrichment criterion associated with an adaptive infill algorithm. The latter is here applied to the study of the flight domain of the RAE-2822 transonic airfoil at two different levels of accuracy to demonstrate its ability to detect areas in a two-dimensional design space where the surrogate model needs improvement to better drive the optimization process.     

Experimental and numerical study of heat and moisture transfers by natural convection in a cavity filled with solid obstacles

Heat, moisture transfers and airflow by natural convection in a rectangular cavity containing on line cylinders were studied. The work zone was arranged in such a way that 2D transfer and flow were established. At steady state, temperature, velocity and humidity fields on the symmetry plane were measured in un-humidified and humidified cavity. These results were then used to compare with CFD simulation. The thermal stratification and circular air flow in the cavity was observed. Humidification at the bottom face of cavity contributes to increase air velocity. The influence of radiation near the cold and warm walls is significant.     

Photoluminescence plasmonic enhancement in InAs quantum dots coupled to gold nanoparticles

Photoluminescence enhancement due to dipole field from gold nanoparticles was observed at 77 K for GaAs capped InAs quantum dots. The gold nanoparticles were coupled to the surface of the cap layer by using dithiol ligands. The enhancement was investigated as a function of the GaAs capped layer thickness. An order of magnitude enhancement in the emission was observed in samples with a cap thickness of 12 nm. This enhancement however is drastically decreased in samples with a cap thickness of 200 nm. The observed enhancement is interpreted in terms of photon scattering from the large dipole scattering cross section.     

“<Emphasis Type="SmallCaps">disassembly plan approach based on subassembly concept</Emphasis>”

A three-dimensional numerical model is established to study the temperature and fluid flow fields in the twin-wire gas metal arc welding (GMAW) process. The high-speed photography system is used to capture the images of the weld pool during the welding. Based on simulation and experimental results, the weld pool formation, convection, and stability in twin-wire GMAW process are investigated. Both “push-pull” and outward flow patterns exist in the twin-wire GMAW weld pool, which can contribute to decreasing the height of the bulge and increasing the width of the pool. The convection in the weld pool can proceed adequately, the arc force between the leading and trailing arcs is relatively balanced, surface tension normal force is uniform along the liquid channel, and the liquid channel is capillary stable, all of those contribute to the stability of the weld bead. The simulation results are in good agreement with those in the experiment.     

Orientations and seed type effect on Al2O3-YAG-ZrO2 eutectic microstructure solidified from the melt by the micro-pulling down technique

Al₂O₃-YAG-ZrO₂ eutectic ceramic rods of 5 mm in diameter were grown by micro-pulling down technique. The seeding and the solidification rate affect microstructure, morphology, crystallography, and thermal stress of the solidified ceramics. The ternary eutectic grown through zirconia (111) seed had inhomogeneous and irregular cellular microstructures. At the stationary stable regime, the microstructure spacing (λ) depends on the pulling rate (v). Under solidification rate of 0.5 mm.min^?1, the rods grown by using eutectic poly-crystal, (100), (111) YAG, and c(0001), A(1?210), M(10?10) sapphire seeds, the YAG and ZrO₂ phases are oriented along the <100> direction parallel to the growth direction. The zirconia (111) seeding X-ray diagram eutectic presents additional peaks and the monoclinic ZrO₂ phase appears at the solidification rate of 1 mm.min-1. The rods grown through ZrO₂ seeding are more stressed than those solidified by using eutectic, YAG and sapphire seeds, respectively.     

Simulation and Experimental Studies of Illumination Effects on the Current Transport of Nitridated GaAs Schottky Diode

Semiconductors - In this paper, we studied the electrical characteristic of Schottky diodes based on gold contact on nitridated GaAs substrates. The used (100) GaAs substrate is n-type with...     

Proposal of new eco-manufacturing feature interaction-based methodology in CAD phase

Following the environmental crises of recent decades, a turning point in the awareness of the fragility of ecosystems has been marked, i.e., environmental awareness. This has contributed to the development of various environmental laws and regulations such as the “Waste Electrical and Electronic Equipment,” the “Restriction of Hazardous Substances,” and the “Registration, Evaluation, Authorization and Restriction of Chemicals” regulations and the “Energy Using Products” Directives. Our work contributes to the development of eco-friendly product manufacturing processes. In order to estimate and optimize the environmental impacts of a product, most of the methodologies, concepts, and tools that integrate computer-aided design (CAD) and life cycle assessment systems generally exploit the feature technology at the level of each feature independently of the others, i.e., “microplanning.” The feature interaction technology (FIT) is treated only in few studies, but it is pivotal in the eco-manufacturing process. In this paper, we propose a new manufacturing-scenarios-based methodology by using FIT and a Multi-criteria Decision Support Method (MCDSM), which helps manufacturers maintain their marketplaces by producing goods in an eco-friendly way. In fact, this methodology helps designers choose from the CAD design phase the most ecological manufacturing process from possible existent scenarios in real time.     

Study of water evaporation and condensation in a domestic refrigerator loaded by wet product

This study was carried out to gain a better insight into evaporation and condensation phenomena due to natural convection in a domestic refrigerator. An experiment was undertaken in a refrigerator loaded with 40 humid plaster cylinders (50 mm diameter). The weight variation of the cylinders was followed over 12 days and the rate of water evaporation (or condensation for some cylinders) was calculated. This measured experimental rate was compared with one obtained from a CFD simulation which took into account air flow by free convection, heat transfer (convection, conduction and radiation) and mass transfer (water evaporation and condensation). The position of high evaporation or condensation rate was well predicted despite the fact that the simulation most often underestimated the experimental values. Near the cold wall where condensation was observed (or near the warm wall where evaporation was observed), the cylinder temperature was lower (or higher) than that of air. This demonstrates the importance of the radiative exchanges between the walls and the products inside a refrigerator which in turn can explain condensation or dehydration phenomena.