A data-driven multitone echo canceller

A data-driven echo canceller for full-duplex data transmission with multitone modulation is presented. This multitone echo canceller (MTEC) is not impaired by eigenvalue-spread problems that are inherent in signal-driven echo cancellers-it has numerical performance and cancellation range that equals, and in most cases exceeds, that of data-driven echo cancellers used in data transmission with baseband or quadrature amplitude modulation. The method makes use of frequency-domain updating, but time-domain implementation of the canceller. It introduces no delay into the received signal path and presents no special difficulties for interframe interpolation between near-end echo, far-end echo, or far-end data signal. The authors also investigate the fast initialization and the special case of far-end frequency offset in the echo signal     

X-linked juvenile retinoschisis: localization between (DXS1195, DXS418) and AFM291wf5 on a single YAC

We studied 17 pedigrees with 108 affected males with X-linked juvenile retinoschisis (RS; McKusick No. 31270) and have analyzed all of the known polymorphic markers in the RS region of Xp22.1-p22.2 between DXS987 and DXS41. By haplotype analyses we found 7 individuals who showed crossovers in this interval surrounding RS. We previously reported AFM291wf5 as the centromeric boundary, and this remains unchanged in the present study. A new recombination was identified on the telomeric side at (DXS1195, DXS418). Our data support the locus order Xpter--(DXS987, DXS207, DXS1053, DXS43)--(DXS1195, DXS418)--(RS, DXS257, DXS999)--(AFM291wf5, DXS443)--DXS1052--(DXS1226, DXS274, DXS41)--Xcen; loci grouped in parentheses could not be mutually ordered by our genetic data. Physical mapping has indicated a distance of at most 900-1,000 kb between (DXS1195, DXS418) and AFM291wf5. No recombination was observed between RS and DXS257 which lies in our new interval of interest, but one critical individual was not informative with this marker. Our data now define the smallest RS inclusion interval. This interval is contained on a single YAC from which we have identified expressed sequences as candidate genes for RS.     

Impact of apolipoprotein E polymorphism on lipoproteins and risk of myocardial infarction. The ECTIM Study

Human apolipoprotein (apo) E, a polymorphic protein with three common alleles, epsilon 2, epsilon 3, and epsilon 4, plays an important role in lipoprotein metabolism. This article describes the association of this polymorphism with lipids, apolipoproteins, and lipoproteins with a particular regard to lipoprotein particles, as defined by their apolipoprotein content, as well as the risk of myocardial infarction in a multicenter population-based case-control study (ECTIM study). In the ECTIM study, 574 male patients aged 25 to 64 were examined 3 to 9 months after myocardial infarction in four regions participating in the World Health Organization MONICA project: Belfast (Northern Ireland) and Lille, Strasbourg, and Toulouse (France). Control subjects (n = 722) were randomly selected from the regional populations. The distribution of apoE phenotypes was significantly different across the four control samples (P = .04), with a higher frequency of the epsilon 4 allele in Belfast (14.3%) than in Toulouse (8.2%). The association of apoE polymorphism with biological measurements was studied in the control groups (n = 640) after men with coronary heart disease or those taking hypolipidemic drugs were omitted, with the apoE3/3 phenotype as a reference after adjustment for concomitant factors. Individuals carrying the epsilon 2 allele had lower levels of plasma cholesterol, low-density lipoprotein cholesterol (LDL-C), and apoB and higher levels of triglycerides, very-low-density lipoprotein cholesterol (VLDL-C), apoC-III, apoE, lipoprotein (Lp) C-III:B, and Lp E:B. However, the effect of the epsilon 2 allele on triglyceride, VLDL-C, apoE, and Lp E:B parameters was heterogeneous across the populations.(ABSTRACT TRUNCATED AT 250 WORDS)     

Effects of composition and phase relations on mechanical properties and crystallization of silicate glasses

Crystallization, mechanical properties, and workability are all important for the commercialization and optimization of silicate glass compositions. However, the inter-relations of these properties as a function of glass composition have received little investigation. Soda-lime-silica glasses with Na₂O-MgO-CaO-Al₂O₃-SiO₂ compositions relevant to commercial glass manufacture were experimentally studied and multiple liquidus temperature and viscosity models were used to complement the experimental results. Liquidus temperatures of the fabricated glasses were measured by the temperature gradient technique, and Rietveld refinements were applied to X-Ray powder diffraction (XRD) data for devitrified glasses, enabling quantitative determination of the crystalline and amorphous fractions and the nature of the crystals. Structural properties were investigated by Raman spectroscopy. Acoustic echography, micro-Vicker's indentation, and single-edge-notched bend testing methods were used to measure Young's moduli, hardness, and fracture toughness, respectively. It is shown that it is possible to design lower-melting soda-lime-silica glass compositions without compromising their mechanical and crystallization properties. Unlike Young's modulus, brittleness is highly responsive to the composition in soda-lime-silica glasses, and notably low brittleness values can be obtained in glasses with compositions in the wollastonite primary phase field: an effect that is more pronounced in the silica primary phase field. The measured bulk crystal fractions of the glasses subjected to devitrification at the lowest possible industrial conditioning temperatures indicate that soda-lime-silica glass melts can be conditioned close to their liquidus temperatures within the compositional ranges of the primary phase fields of cristobalite, wollastonite, or their combinations.     

Nodal DG-FEM solution of high-order Boussinesq-type equations

A discontinuous Galerkin finite-element method (DG-FEM) solution to a set of high-order Boussinesq-type equations for modelling highly nonlinear and dispersive water waves in one horizontal dimension is presented. The continuous equations are discretized using nodal polynomial basis functions of arbitrary order in space on each element of an unstructured computational domain. A fourth-order explicit Runge-Kutta scheme is used to advance the solution in time. Methods for introducing artificial damping to control mild nonlinear instabilities are also discussed. The accuracy and convergence of the model with both h (grid size) and p (order) refinement are confirmed for the linearized equations, and calculations are provided for two nonlinear test cases in one horizontal dimension: harmonic generation over a submerged bar, and reflection of a steep solitary wave from a vertical wall. Test cases for two horizontal dimensions will be considered in future work.     

Topic Identification in Dynamical Text by Complexity Pursuit

The problem of analysing dynamically evolving textual data has arisen within the last few years. An example of such data is the discussion appearing in Internet chat lines. In this Letter a recently introduced source separation method, termed as complexity pursuit, is applied to the problem of finding topics in dynamical text and is compared against several blind separation algorithms for the problem considered. Complexity pursuit is a generalisation of projection pursuit to time series and it is able to use both higher-order statistical measures and temporal dependency information in separating the topics. Experimental results on chat line and newsgroup data demonstrate that the minimum complexity time series indeed do correspond to meaningful topics inherent in the dynamical text data, and also suggest the applicability of the method to query-based retrieval from a temporally changing text stream. This revised version was published online in June 2006 with corrections to the Cover Date.     

Design and Analysis of Experiments on Nonconvex Regions

Modeling a response over a nonconvex design region is a common problem in diverse areas such as engineering and geophysics. The tools available to model and design for such responses are limited and have received little attention. We propose a new method for selecting design points over nonconvex regions that is based on the application of multidimensional scaling to the geodesic distance. Optimal designs for prediction are described, with special emphasis on Gaussian process models, followed by a simulation study and an application in glaciology. Supplementary materials for this article are available online.     

Eurocorr 2016: linking science and engineering – part 4

The 2016 Eurocorr Meeting was held in Montpellier, France, from 12 to 15 September 2016. The focus of the meeting was Linking Science and Engineering. The meeting attracted over 1000 delegates from at least 53 countries with France, Germany, the UK and Japan providing around half the delegates between them. Over 400 oral presentations, more than 200 of which were full papers, and over 140 posters were presented during the sessions and workshops. Parts 1–4 of this report present a review of the technical sessions over four issues with sessions on Advanced Analytical Methods for Corrosion Research, CO₂-Corrosion in Industrial Capture Transportation and Utilisation Applications, Cathodic Protection of Steel in Concrete, Coatings for High Temperature, Corrosion Education, Improving Corrosion Control of Ships, Marine Corrosion, Corrosion Issues for Renewable Energies, Nuclear Corrosion, and Nuclear Corrosion Mechanisms being covered in this report.