Deflection Calculation of FRP Reinforced Concrete Beams Based on Modifications to the Existing Branson Equation

Fundamental concepts of tension stiffening are used to explain why Branson’s equation for the effective moment of inertia Ie does not predict deflection well for fiber reinforced polymer (FRP) reinforced concrete beams. The tension stiffening component in Branson’s equation is shown to depend on the ratio of gross-to-cracked moment of inertia (Ig/Icr), and gives too much tension stiffening for beams with an Ig/Icr ratio greater than 3. FRP beams typically have an Ig/Icr ratio greater than 5, leading to a much stiffer response and underprediction of computed deflections as observed by others in the past. One common approach to computing deflection of FRP reinforced concrete beams has been to use a modified form of the Branson equation. This paper presents a rational development of appropriate modification factors needed to reduce the tension stiffening component in Branson’s original expression to realistic levels. Computed deflections using this approach give reasonable results with the right modification factor, and compare well with a more general unified approach that incorporates a realistic tension stiffening model. Comparison is made with the existing and past correction factors recommended by ACI 440 for predicting deflection of FRP beams. The method presently used by ACI 440 gives reasonable estimates of deflection for glass and carbon FRP reinforced beams. However, this method underestimates deflection of aramid FRP reinforced beams and is restricted to rectangular sections. A proposal is made for adoption of a simple modification factor that works well for all types of FRP bar and beam cross-sectional shape.     

Indomethacin inhibits the natriuretic effects of neuropeptide Y in anesthetized rats

Neuropeptide Y (NPY) is a unique modulator of renal function that enhances urine flow and sodium excretion despite marked reductions in renal blood flow. We investigated whether the cyclooxygenase inhibitor indomethacin alters the renal NPY effects in anesthetized rats. Treatment with 5 mg/kg indomethacin i.p. lowered urinary prostaglandin excretion by approximately 85%. Systemic infusion of NPY elevated mean arterial pressure by approximately 15 mm Hg and renovascular resistance by approximately 8.0 mm Hg/ml/min, whereas the related peptide YY3-36 (PYY3-36) did not. Nevertheless, both peptides enhanced urine flow rate by approximately 250 and approximately 100 microl/15 min, respectively, and sodium excretion by approximately 15 micromol/15 min. Treatment with indomethacin did not affect NPY- and PYY3-36-induced alterations of systemic and renovascular hemodynamics but completely abolished NPY- and PYY3-36-induced diuresis and natriuresis. Endogenous creatinine clearance was not affected by any treatment. We conclude that cyclooxygenase-derived arachidonic acid metabolites are not involved in the systemic or renal hemodynamic effects of NPY and PYY3-36 but mediate NPY- and PYY3-36-induced diuresis and natriuresis.     

Fiber Coating Concepts for Brittle-Matrix Composites

The current interest in tough, high-temperature materials has motivated fiber coating development for brittle-matrix composites with brittle reinforcements. Such coatings are needed for controlled interface debonding and frictional sliding. The system investigated in this study was sapphire fiber-reinforced alumina. This system is thermochemically stable for severe use conditions, exhibits little thermal expansion mismatch, and utilizes the excellent strength and creep resistance of sapphire reinforcements. Porous oxide and refractory metal coatings which satisfy requirements for toughness improvement in these composites were identified by employing a variety of newly developed mechanical testing techniques for determining the interfacial fracture energies and sliding resistances.     

Precise selective deposition of microparticles on electrodes of microelectronic chips

We examined the high precision deposition of toner and polymer microparticles with a typical size of approximately 10 microm on electrode arrays with electrodes of 100 microm and below using custom-made microelectronic chips. Selective desorption of redundant particles was employed to obtain a given particle pattern from preadsorbed particle layers. Microparticle desorption was regulated by dielectrophoretic attracting forces generated by individual pixel electrodes, tangential detaching forces of an air flow, and adhesion forces on the microchip surface. A theoretical consideration of the acting forces showed that without pixel voltage, the tangential force applied for particle detachment exceeded the particle adhesion force. When the pixel voltage was switched on, however, the sum of attracting forces was larger than the tangential detaching force, which was crucial for desorption efficiency. In our experiments, appropriately large dielectrophoretic forces were achieved by applying high voltages of up to 100 V on the pixel electrodes. In addition, electrode geometries on the chip's surface as well as particle size influenced the desorption quality. We further demonstrated the compatibility of this procedure to complementary metal oxide semiconductor chip technology, which should allow for an easy technical implementation with respect to high-resolution microparticle deposition.     

Evolution of the oxide structure of 9CrODS steel exposed to supercritical water

The corrosion behavior and oxide structure of 9CrODS steel in supercritical water has been studied. Samples were exposed to supercritical water at 500 and 600 °C for times of 2, 4 and 6 weeks. The oxide structure was studied using microbeam synchrotron X-ray diffraction and fluorescence analysis. The 600 °C samples exhibited a three-layer structure with Fe₃O₄ in the outer layer, a mixture of FeCr₂O₄ and Fe₃O₄ in the inner layer, and a mixture of metal and oxide grains (FeCr₂O₄ and Cr₂O₃) in the diffusion layer. Between the 2 and 4-week samples exposed to 600 °C supercritical water, a Cr₂O₃ film appeared at the diffusion layer-metal interface which appears to be associated with slower oxidation of the metal. The 500 °C samples also showed a three-layer structure, but both the outer and inner oxide layers contained mainly Fe₃O₄, and the diffusion layer contained much fewer oxide precipitates and was a solid solution of oxygen ahead of the oxide front.     

A new enzymatically produced 1-lactulose: A pilot study to test the bifidogenic effects

In a novel pilot plant scale process, lactulose was synthesized enzymatically, operating a maximum batch volume of 170 L. The test product was subjected to a randomized, double-blind, placebo-controlled pilot feeding study. Participants consumed a milk serum drink for 14 days, equalling a daily intake of about 3 g d⁻¹ galactosyl-fructoses. Additionally, the effect of industrially produced lactulose and a placebo drink without lactulose was determined. So far, clinical studies on the prebiotic action of lactulose only focussed on the effects of industrially generated lactulose. The intake of enzymatically synthesized lactulose significantly increased (p = 0.001) faecal bifidobacterial counts, while there was no difference with industrially produced lactulose. Analysis of the compounds showed that the drink with enzymatically synthesized lactulose contained an additional disaccharide, β-1,1-galactosyl-fructose. Presumably, this sugar has a bifidogenic effect and may represent a novel prebiotic.     

Atomic layer deposition process with TiF4 as a precursor for depositing metal fluoride thin films

A novel atomic layer deposition process for the preparation of fluoride thin films in a temperature range of 225 degrees C-400 degrees C is introduced. The crystallinity, morphology, composition, thicknesses, refractive indices, and transmittance of the films are analyzed. Low impurity levels are obtained at 350 degrees C-400 degrees C with good stoichiometry. Refractive indices of 1.34-1.42 for MgF(2), 1.43 for CaF(2), and 1.57-1.61 for LaF(3) films are obtained.