Absolute stability of an implicit method based on third-order off-step discretization for the initial-value problem on a graded mesh

Engineering with Computers - We studied a new implicit method of order three based on two off-step points for the numerical solution of second-order nonlinear initial-value problems...     

Conversion of Canola Meal into a High-Protein Feed Additive via Solid-State Fungal Incubation Process

The study goal was to determine the optimal fungal culture to reduce glucosinolates (GLS), fiber, and residual sugars while increasing the protein content and nutritional value of canola meal. Solid‐state incubation conditions were used to enhance filamentous growth of the fungi. Flask trials were performed using 50 % moisture content hexane‐extracted (HE) or cold‐pressed (CP) canola meal with incubation for 168 h at 30 °C. Incubation on HE canola meal Trichoderma reesei (NRRL‐3653) achieved the greatest increase in protein content (23 %), while having the lowest residual levels of sugar (8 % w/w) and GLS (0.4 μM/g). Incubation on CP canola meal Trichoderma reesei (NRRL‐3653), A. pullulans (NRRL‐58522), and A. pullulans (NRRL‐Y‐2311‐1) resulted in the greatest improvement in protein content (22.9, 16.9 and 15.4 %, respectively), while reducing total GLS content from 60.6 to 1.0, 3.2 and 10.7 μM/g, respectively. HE and CP canola meal GLS levels were reduced to 65.5 and 50.7 % by thermal treatments while solid‐state microbial conversion further reduced GLS up to 99 and 98 %, respectively. Fiber levels increased due to the concentration effect of removing oligosaccharides and GLS.     

Effects of climate change on biomass production and substitution in north-central Sweden

In this study we estimate the effects of climate change on forest production in north-central Sweden, as well as the potential climate change mitigation feedback effects of the resulting increased carbon stock and forest product use. Our results show that an average regional temperature rise of 4 °C over the next 100 years may increase annual forest production by 33% and potential annual harvest by 32%, compared to a reference case without climate change. This increased biomass production, if used to substitute fossil fuels and energy-intensive materials, can result in a significant net carbon emission reduction. We find that carbon stock in forest biomass, forest soils, and wood products also increase, but this effect is less significant than biomass substitution. A total net reduction in carbon emissions of up to 104 Tg of carbon can occur over 100 years, depending on harvest level and reference fossil fuel.     

Soft computing‐based approach for optimal design of on‐chip comparator and folded‐cascode op‐amp using colliding bodies optimization

This paper presents an efficient approach for the optimal designs of two analog circuits, namely complementary metal oxide semiconductor) two‐stage comparator with p‐channel metal oxide semiconductor input driver and n‐channel input and folded‐cascode operational amplifier using a recently proposed meta‐heuristic‐based optimization algorithm named as colliding bodies optimization (CBO). It is a multi‐agent algorithm that does not depend upon any internal control parameter, making the algorithm extremely simple. The main objective of this paper is to optimize the metal oxide semiconductor (MOS) transistors' sizes using CBO in order to reduce the areas occupied by the circuits and to get better performance parameters of the circuits. Simulation Program with Integrated Circuit Emphasis simulation has been carried out by using the optimal values of MOS transistors' sizes and other design parameters to validate that CBO‐based design is satisfying the desired specifications. Simulation results demonstrate that the design specifications are closely met and the required functionalities are achieved. The simulation results also confirm that the CBO‐based approach is superior to the other algorithms in terms of MOS area and performance parameters like gain, power dissipation, etc., for the examples considered. Copyright © 2016 John Wiley & Sons, Ltd.     

Quantifying in-use PM measurements for heavy duty diesel vehicles

Heavy duty emissions regulations have recently expanded from the laboratory to include in-use requirements. This paradigm shift to in-use testing has forced the development of portable emissions measurement systems (PEMS) for particulate matter (PM). These PM measurements are not trivial for laboratory work, and are even more complex for in-use testing. This study evaluates five PM PEMS in comparison to UCR's mobile reference laboratory under in-use conditions. Three on-highway, heavy-duty trucks were selected to provide PM emissions levels from 0.1 to 0.0003 g/hp-h, with varying compositions of elemental carbon (EC), organic carbon (OC), and sulfate. The on-road driving courses included segments near sea level, at elevations up to 1500 m, and coastal and desert regions. The photoacoustic measurement PEMS performed best for the non-after treatment system (ATS)-equipped engine, where the PM was mostly EC, with a linear regression slope of 0.91 and an R(2) of 0.95. The PEMS did not perform as well for the 2007 modified ATS equipped engines. The best performing PEMS showed a slope of 0.16 for the ATS-equipped engine with predominantly sulfate emissions and 0.89 for the ATS-equipped engine with predominantly OC emissions, with the next best slope at 0.45 for the predominantly OC engine.     

Characterization of highly hydrophobic coatings deposited onto pre-oxidized silicon from water dispersible organosilanes

The formation and quality of highly hydrophobic coatings deposited from water dispersible organosilanes onto pre-oxidized single crystal silicon were studied using atomic force microscopy, ellipsometry, dynamic contact angle measurements and electrochemical impedance spectroscopy (EIS). Highly hydrophobic films of a commercially available water dispersible silane and two different cationic alkoxysilanes were prepared by dip coating. It was found using atomic force microscopy that, in general, the structure of these highly hydrophobic films is a continuous film with some particulates attributed to bulk polymerization of the precursor molecule in water. Film defects were quantified using EIS by the value of charge transfer resistance at the hydrofluoric acid/silicon interface. Potential applications of this type of coatings include reduction/elimination of stiction in micro-electromechanical systems, contact printing in materials microfabrication, inhibition of corrosion and oxidation, prevention of water wetting, lubrication and protein adsorption.     

Enhancing protein and sugar release from defatted soy flakes using ultrasound technology

This research focused on the use of high-power ultrasound prior to soy protein extraction to simultaneously enhance protein and sugar release in the extract. Defatted soy flakes dispersed in water were sonicated for 15, 30, 60 and 120 s using a bench-scale ultrasound unit. The ultrasonic amplitudes used were: 0, 21, 42, 63 and 84 μm_pp (peak-to-peak). The respective power densities were 0.30, 0.87, 1.53 and 2.56 W/ml. Scanning electron micrographs of sonicated samples showed the structural disruption of soy flakes. The particle size decreased nearly 10-fold following ultrasonic treatment at high amplitudes. Sonication at high amplitude for 120 s gave the highest increase in total sugar released (50%) and protein yield (46%) when compared with non-sonicated samples (control). Ultrasonic pretreatment was also carried out with and without cooling for temperature moderation. The heat generated during sonication had no significant effect on protein and sugar release from defatted soy flakes. The use of ultrasound can significantly improve protein yield and reduce the overall cost of producing soy protein from flakes.