A Potent Mimetic of the Siglec-8 Ligand 6’-Sulfo-Sialyl Lewisx

Siglecs are members of the immunoglobulin gene family containing sialic acid binding N-terminal domains. Among them, Siglec-8 is expressed on various cell types of the immune system such as eosinophils, mast cells and weakly on basophils. Cross-linking of Siglec-8 with monoclonal antibodies triggers apoptosis in eosinophils and inhibits degranulation of mast cells, making Siglec-8 a promising target for the treatment of eosinophil- and mast cell-associated diseases such as asthma. The tetrasaccharide 6’-sulfo-sialyl Lewis^x has been identified as a specific Siglec-8 ligand in glycan array screening. Here, we describe an extended study enlightening the pharmacophores of 6’-sulfo-sialyl Lewis^x and the successful development of a high-affinity mimetic. Retaining the neuraminic acid core, the introduction of a carbocyclic mimetic of the Gal moiety and a sulfonamide substituent in the 9-position gave a 20-fold improved binding affinity. Finally, the residence time, which usually is the Achilles tendon of carbohydrate/lectin interactions, could be improved.     

Kinetic of CO2 absorption and carbamate formation in aqueous solutions of diethanolamine

The absorption rates of CO₂ into aqueous solutions of Diethanolamine (DEA) with varying concentrations from 0.2 to 4M and temperature range from 293 to 323 K were measured by using a laboratory stirred reactor. The CO₂ partial pressure was varied in a range that the reaction would occur in pseudo first order regime. Experimental data were analyzed and the kinetic parameters associated with the reaction were determined. The activation energy for the deprotonation of the intermediate zwitterion was estimated at about 11.4 kcal/mol. The contribution of carbamate formation to the overall absorbed CO₂ was experimentally evaluated and found to be of the order of 100%.     

Performance comparison of space-time block coded and cyclic delay diversity MC-CDMA systems

Spatial diversity is a widely applied technique for enhancing wireless system performance since it greatly reduces the detrimental effects of multipath fading. Space-time block codes have been considered the best choice for transmit diversity in narrowband environments, but their use in broadband channels is questionable due to their inability to pick up multipath diversity. However, when used in conjunction with an MC-CDMA system, they achieve not only full spatial but also variable multipath diversity depending on the employed spreading. In comparison, cyclic delay diversity is an attractive approach to achieve spatial and multipath diversity. Its simplicity and conformability with current standards makes it desirable for multicarrier systems. Previous studies suggest that CDD is only advantageous with an outer channel code for OFDM systems. In this article, we compare STBCs and CDD applied to an MC-CDMA system in terms of complexity and performance. It is shown that for an MC-CDMA system, CDD benefits from spreading and channel coding that makes it very competitive with STBCs, particularly since it is applicable to any number of transmit antennas with no loss in rate.     

Circuit analysis of an ultrafast junction mixing scanning tunnelingmicroscope

A lumped element circuit model for the operation of a junction mixing scanning tunneling microscope (JM-STM) is presented. Fits from this model show excellent agreement with experimental results in the picosecond time regime. The tip sample capacitance employed in the model was calculated to be 33 fF, using the method of images. By varying the capacitance, various tip/sample geometries can be investigated. Testing the response of the model tunnel junction, for faster electrical pulses, suggests how the JM-STM can be pushed into the femtosecond time regime     

Use of pyrogenic silicas for petroleum oil polar fraction characterisation. Fourier transform infrared spectroscopy and microelectrophoresis studies

In the power transformer, the presence of polar or charged species in the insulating oil can cause failure and electric discharges. Solid substrates such as silica can be used to extract the polar species and to refine the oil in order to prevent future failure in the power transformer. However, the use of silica for petroleum oil separation and refining will depend on the silica characteristics such as surface charge, surface composition, specific surface area and particle size.Various pyrogenic silicas having various specific surface areas (49-200 m² g⁻¹) and particle sizes (207-500 nm) were used to extract the polar fractions from the neat transformer insulating oils (a new, NO, and used, UO2, oils). The oil covered silica samples were investigated by diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy in the range 4000-600 cm⁻¹. The bare silica surfaces present two main hydroxyl components, a sharper peak at 3745 cm⁻¹, I₃₇₄₅, due to isolated silanols and a second broad, which spreads over 3745-3000 cm⁻¹, I_3745-3000, due to H-bonded silanols. The relative intensities of the two components, I₃₇₄₅/I_3745-3000, varied for the bare and the oil covered silicas depending on the solid surface characteristics. The adsorption of the NO polar fraction onto silica leads to strong reduction in intensity of the sharper peak in favour of the broad one. However, the adsorption of the UO2 polar fraction onto silica leads in all cases to the decrease in the intensity of the both silica OH components. Further, the UO2 adsorption on the silica leads to the apparition of a broad peak at low frequency in the region 3250-3300 cm⁻¹ which, is due to the associated phenolic groups of UO2 oil polar fraction. The analysis of the DRIFT spectra for various samples indicates that the oil polar fraction resembles to asphaltenes compounds.The microelectrophoresis method used to investigate the surface charge at the water/oil polar fraction covered silica interface, indicates negatively charged particles. Further, the negative charge increased with the pH, as resulting from the increase of the ionisation and/or the amount of the oil polar carboxylic and phenolic groups. The oil polar fraction, i.e. the asphaltene components, in contact with both the silica surface and water at high pH values rearrange, due to their amphiphilic character.Finally, the use of the silica substrates seems to be suited to extract and analyse polar species present in petroleum oil. A correlation is found between the nature of the oil, its functionalities, and the magnitude of its zeta potential value at the water/oil covered silica interface.     

An image multiresolution representation for lossless and lossycompression

We propose a new image multiresolution transform that is suited for both lossless (reversible) and lossy compression. The new transformation is similar to the subband decomposition, but can be computed with only integer addition and bit-shift operations. During its calculation, the number of bits required to represent the transformed image is kept small through careful scaling and truncations. Numerical results show that the entropy obtained with the new transform is smaller than that obtained with predictive coding of similar complexity. In addition, we propose entropy-coding methods that exploit the multiresolution structure, and can efficiently compress the transformed image for progressive transmission (up to exact recovery). The lossless compression ratios are among the best in the literature, and simultaneously the rate versus distortion performance is comparable to those of the most efficient lossy compression methods.     

Some Physical Properties of Pure and Doped Polyvinyl Alcohol under Applied Stress

Thick films of polyvinyl alcohol (PVA) containing very finemetallic powder, copper (Cu), iron (Fe) and aluminum (Al) 2.5% by weight,were prepared by the casting method. The temperature dependence of Young'smodulus at constant stress, the stress dependence of Young's modulus(Y), the stress dependence of dielectric constant (ε) and stressdependence of phonon velocity, were studied. It was found that Young'smodulus (Y) of the pure sample has the lowest value and that of PVA + Alhas the highest value. This can be explained on the basis that Ydepends on the ratio between the energy of molecular interactions andthe energy of thermal motion of the sample units. We also found that thedielectric constant increases with the addition of metallic powder, andwith an increasing applied stress. The phonon velocity increased withincreasing stress. The increase of stress decreases imperfectionsleading to the increased phonon velocity. The electronic absorptionspectra of PVA is not affected by doping Al and Fe, whereas the PVA dopedwith Cu shows a shift of the absorption maxima toward a longer wavelength.The instantaneous elastic behavior may be observed only at lowtemperatures and very short creep times.     

Shear mode coupling and tilted grain growth of A1N thin films in BAW resonators.

Polycrystalline A1N thin films were deposited by RF reactive magnetron sputtering on Pt(111)/Ti electrode films. The substrates were tilted by an angle ranging from 40 degrees to 70 degrees with respect to the target normal. A low deposition temperature and a high sputter gas pressure were found ideal for tilted growth. The resulting grain tilt angle amounts to about half the substrate tilt angle. For coupling evaluation, 5 GHz solidly mounted resonator structures have been realized. The tilted grain A1N films exhibited a permittivity in the 9.5-10.5 range and loss tangent of 0.3%. Two shear modes as well as the longitudinal mode could be clearly identified. The coupling coefficient k2(eff) of the fundamental thickness shear mode (TS0) was found to be about 0.5%, which is compatible with a c-axis tilt of about 6 degrees.     

Latexes with intrinsic crosslink activity

In order to develop and study ‘two pack in one pot’ systems, i.e. binder systems consisting of a blend of complementary reactive latexes, epoxy- and amino-functional latexes were prepared and characterised, with atte lion especially directed to control of the number of functional groups and control of the molecular weight. The investigation is focused on the control of the molecular weight of epoxy-functional latexes and on the incorporation of amino groups in latexes by using amino-functional methacrylic monomers. To determine the reactivity of the epoxy and amino groups and to check which factors influence the crosslink reaction a number of blends were prepared from both solution and emulsion copolymers and dried at ambient temperatures. It was found that the major factors, which affect the efficiency of crosslinking, are the T_g and the molecular weight of the copolymers and, in the case of a ‘two pack in one pot system’, the rate of the polymer-polymer reaction in relation to that of the polymer-polymer interdiffusion.