Microwave hybrid fast sintering of red clay ceramics

This work aimed to examine the performance of the hybrid sintering of clay ceramic in a microwave furnace, compared to the sintering process in a conventional furnace. The raw materials were subjected to X-ray fluorescence, loss on ignition (LOI), X-ray diffraction, particle size distribution, real specific mass, and thermogravimetric analyses. The red clay ceramic mass was prepared, extruded, pre-sintered in a conventional furnace at 600°C/60 min, and sintered at temperatures between 700 °C and 1100 °C. The sintering conventional (resistive oven) was carried out for 60 min with a heating rate of 10°C/min. In the microwave furnace, the sintering times were 5, 10, and 15 min, with a heating rate of 50°C/min, with a sintering chamber coated with silicon carbide (susceptor). The sintered specimens were characterized according to linear shrinkage, water absorption, apparent porosity, apparent specific mass, X-ray diffraction, Raman spectroscopy analysis, spectroscopy analysis in the ultraviolet and visible regions, microhardness, and scanning electron microscopy. The results showed that microwave sintering promoted an increase in the microhardness and apparent specific mass, and reduction in water absorption and apparent porosity values, due to greater densification in the microstructure. The best results occurred for specimens sintered at 1100°C.     

Fat Distribution and Lipid Profile of Young Adults with Congenital Adrenal Hyperplasia Due to 21-Hydroxylase Enzyme Deficiency

We aimed to compare detailed fat distribution and lipid profile between young adults with congenital adrenal hyperplasia due to 21-hydroxylase enzyme deficiency and a control group. We also verified independent associations of treatment duration and daily hydrocortisone dose equivalent (HDE) with lipid profile within patients. This case–control study included 23 patients (7 male and 16 female) matched by an age range of young adults (18–31 years) with 20 control subjects (8 male and 12 female). Dual energy X-ray absorptiometry was used to measure the fat distribution. Male patients demonstrated elevated indices of fat mass for total (7.7 ± 2.1 vs. 4.5 ± 1.3 kg/m², p = 0.003), trunk (4.0 ± 1.2 vs. 2.2 ± 0.8 kg/m², p = 0.005), android (0.63 ± 0.24 vs. 0.32 ± 0.15 kg/m², p = 0.008), gynoid (1.34 ± 0.43 vs. 0.74 ± 0.24 kg/m², p = 0.005), arm (0.65 ± 0.16 vs. 0.39 ± 0.10 kg/m², p = 0.009), and leg regions (2.7 ± 0.8 vs. 1.6 ± 0.4 kg/m², p = 0.005) than the control group, but not in females. However, female patients demonstrated elevated ratio of low-density lipoprotein cholesterol to high-density lipoprotein cholesterol (1.90 ± 0.46 vs. 1.39 ± 0.47, p = 0.009) than the control group, but not in males. Total fat mass was inversely correlated with total testosterone (r = −0.64, p = 0.014) and positively correlated with leptin in males (r = 0.75, p = 0.002). An elevated daily HDE (β = 0.43, p = 0.038 and β = 0.47, p = 0.033) and trunk to total fat mass ratio (β = 0.46, p = 0.025, and β = 0.45, p = 0.037) were independently correlated with impaired lipid profile markers. Although there is no altered lipid profile, male patients demonstrated an increased fat distribution. However, female patients presented with an impaired lipid profile marker but demonstrated close values of normal fat distribution. Interestingly, the dose of glucocorticoid therapy can have some role in the lipid mechanisms.     

Oxidative Stress and Low-Grade Inflammation in Polycystic Ovary Syndrome: Controversies and New Insights

The pathophysiology of Polycystic Ovary Syndrome (PCOS) is quite complex and different mechanisms could contribute to hyperandrogenism and anovulation, which are the main features of the syndrome. Obesity and insulin-resistance are claimed as the principal factors contributing to the clinical presentation; in normal weight PCOS either, increased visceral adipose tissue has been described. However, their role is still debated, as debated are the biochemical markers linked to obesity per se. Oxidative stress (OS) and low-grade inflammation (LGI) have recently been a matter of researcher attention; they can influence each other in a reciprocal vicious cycle. In this review, we summarize the main mechanism of radical generation and the link with LGI. Furthermore, we discuss papers in favor or against the role of obesity as the first pathogenetic factor, and show how OS itself, on the contrary, can induce obesity and insulin resistance; in particular, the role of GH-IGF-1 axis is highlighted. Finally, the possible consequences on vitamin D synthesis and activation on the immune system are briefly discussed. This review intends to underline the key role of oxidative stress and low-grade inflammation in the physiopathology of PCOS, they can cause or worsen obesity, insulin-resistance, vitamin D deficiency, and immune dyscrasia, suggesting an inverse interaction to what is usually considered.     

A self‐scalable load injection service

Load testing of applications is an important and costly activity for software provider companies. Classical solutions are very difficult to set up statically, and their cost is prohibitive in terms of both human and hardware resources. Virtualized cloud computing platforms provide new opportunities for stressing an application's scalability, by providing a large range of flexible and less expensive (pay‐per‐use model) computation units. On the basis of these advantages, load testing solutions could be provided on demand in the cloud. This paper describes a Benchmark‐as‐a‐Service solution that automatically scales the load injection platform and facilitates its setup according to load profiles. Our approach is based on: (i) virtualization of the benchmarking platform to create self‐scaling injectors; (ii) online calibration to characterize the injector's capacity and impact on the benched application; and (iii) a provisioning solution to appropriately scale the load injection platform ahead of time. We also report experiments on a benchmark illustrating the benefits of this system in terms of cost and resource reductions. Copyright © 2013 John Wiley & Sons, Ltd.     

Consistency-based and abductive diagnoses as generalised stable models

If realistic systems are to be successfully modelled and efficiently diagnosed using model-based techniques, a more expressive language than classical logic is required. In this paper, we present a definition of diagnosis which allows the use of a nonmonotonic construct, negation as failure, in the modelling language. This definition is based on thegeneralised stable model semantics of abduction. Furthermore, we argue that, if negation as failure is permitted in the modelling language, the distinction between abductive and consistency-based diagnosis is no longer clear. Our definition allows both forms of diagnosis to be expressed in a single framework. It also allows a single interference procedure to perform abductive or consistency-based diagnosis, as appropriate.This paper is an extended and revised version of ref. [29].     

Testable heuristics for the 0–1 knapsack problem

Two kinds of heuristics, fixed time and cut time, are proposed in order to use the running time available in solving 0–1 knapsack problems profitably.Translated from Kibernetika, No. 2, pp. 44–52, March–April, 1991.     

Comparison of finite element reliability methods

The spectral stochastic finite element method (SSFEM) aims at constructing a probabilistic representation of the response of a mechanical system, whose material properties are random fields. The response quantities, e.g. the nodal displacements, are represented by a polynomial series expansion in terms of standard normal random variables. This expansion is usually post-processed to obtain the second-order statistical moments of the response quantities. However, in the literature, the SSFEM has also been suggested as a method for reliability analysis. No careful examination of this potential has been made yet. In this paper, the SSFEM is considered in conjunction with the first-order reliability method (FORM) and with importance sampling for finite element reliability analysis. This approach is compared with the direct coupling of a FORM reliability code and a finite element code. The two procedures are applied to the reliability analysis of the settlement of a foundation lying on a randomly heterogeneous soil layer. The results are used to make a comprehensive comparison of the two methods in terms of their relative accuracies and efficiencies.     

Affordances in the design of enactive systems

Enactive interfaces must incorporate intuitive activity that characterizes naturalistic perception. However, the manner in which information is presented is not more important than the contents: what information is presented. In this contribution, we address the contents of perception. We argue that people perceive affordances, that is, the possible actions that are available in any given situation. We further argue that enactive interfaces should be designed to optimize presentation of information about the possible actions that are available to a person using the enactive interface. The design of enactive interfaces might be guided by an extension of the theory of ecological interface design (Vicente in Hum Factors 44:62–78, 2002) to include multimodal information that is accessed through fast, intuitive exploratory movement. We review two empirical studies that illustrate our arguments. Careful analysis of affordances, together with our increasing understanding of the enactive perception of affordances, should influence the design of enactive interfaces.