Interfacing Renewable Energy Sources to the Utility Grid Using a Three-Level Inverter

This paper presents a novel approach for the connection of renewable energy sources to the utility grid. Due to the increasing power capability of the available generation systems, a three-level three-phase neutral-point-clamped voltage-source inverter is selected as the heart of the interfacing system. A multivariable control law is used for the regulator because of the intrinsic multivariable structure of the system. A current source (playing the role of a generic renewable energy source) is connected to the grid using a three-level inverter in order to verify the good performance of the proposed approach. Large- and small-signal d-q state-space averaged models of the system are obtained and used to calculate the multivariable controller based on the linear quadratic regulator technique. This controller simultaneously regulates the dc-link voltage (to operate at the maximum power point of the renewable energy source), the mains power factor (the power is delivered to the grid at unity power factor), and the dc-link neutral-point voltage balance. With the model and regulator presented, a specific switching strategy to control the dc-link neutral-point voltage is not required. The proposed controller can be used for any application, since its nature makes possible the control of any system variable. The good performance of the presented interfacing solution in both steady-state and transient operation is verified through simulation and experimentation using a 1-kW neutral-point-clamped voltage-source-inverter prototype, where a PC-embedded digital signal processor board is used for the controller implementation     

Capacitor Voltage Balance for the Neutral-Point- Clamped Converter using the Virtual Space Vector Concept With Optimized Spectral Performance

This paper presents a new pulsewidth modulation (PWM) for the complete control of the neutral-point voltage in the three-level three-phase neutral-point-clamped (NPC) direct current-alternating current (dc-ac) converter. The balancing of the neutral-point voltage is achieved over the full range of converter output voltages and for all load power factors with the minimum output voltage distortion at around the switching frequency. The simple phase duty-ratio expressions in d-q-0 coordinates that define this modulation are presented. The performance of this modulation approach and its benefits over other previously proposed solutions are verified through simulation and experiments.     

Design of a boost power factor correction converter using optimization techniques

This paper presents an approach to continuous variable design optimization of a power electronics converter. The objective of the optimization approach is to minimize the total component cost. The methodology is illustrated with the design of a boost power factor correction front-end converter with an input electromagnetic interference filter. The system design variables are first identified. The relevant system responses and component costs are then expressed as a function of these design variables. Finally, by using mathematical optimization techniques, the design variable values that minimize the total system component cost are obtained, given practical constraints on these design variables and system responses.     

The nearest three virtual space vector PWM - a modulation for the comprehensive neutral-point balancing in the three-level NPC inverter

This letter presents a new modulation approach for the complete control of the neutral-point voltage in the three-level three-phase neutral-point-clamped voltage source inverter. The new modulation approach, based on the virtual space vector concept, guarantees the balancing of the neutral-point voltage for any load (linear or nonlinear) over the full range of converter output voltage and for all load power factors, the only requirement being that the addition of the output three-phase currents equals zero. The implementation of the proposed modulation is simple according to the phase duty-ratio expressions presented. These expressions are only dependent on the modulation index and reference vector angle. The performance of this modulation approach and its benefits over other previously proposed solutions are verified experimentally.     

Output voltage distortion characterization in multilevel PWM converters

One of the main features to consider in the development of new pulsewidth modulations (PWM) for multilevel converters is the high-frequency output-voltage distortion. In this letter, a novel per-switching-cycle figure, the harmonic distortion of order n for switching cycle k(HD/sub n,k/), is introduced to quantitatively characterize the output three-phase voltage harmonic distortion of multilevel converters around all the integer multiples of the switching frequency. This figure allows for the decomposing of the modulation design problem within an output voltage fundamental cycle into an independent set of smaller problems for every switching cycle. The expression of HD/sub n,k/ as a function of the switching states' duty-ratio is presented for the three-level three-phase neutral-point-clamped voltage source inverter and it can be easily obtained for any other multilevel converter. From the evaluation of HD/sub n,k/ over 1/6th of the output-voltage fundamental-period the value of HD/sub n/ is obtained, providing a measure of the output voltage distortion in a fundamental period. This information is obtained at a lower computational cost than conventional fast Fourier transform (FFT) analysis. The accuracy of the HD/sub n/ distortion predictions is verified by comparing it to FFT-based results obtained from simulation and experiments. The expression to compute the total harmonic distortion (THD) as a function of HD/sub n/ is also derived.     

Multilevel Diode-Clamped Converter for Photovoltaic Generators With Independent Voltage Control of Each Solar Array

In photovoltaic (PV) power systems where a set of series-connected PV arrays (PVAs) is connected to a conventional two-level inverter, the occurrence of partial shades and/or the mismatching of PVAs leads to a reduction of the power generated from its potential maximum. To overcome these problems, the connection of the PVAs to a multilevel diode-clamped converter is considered in this paper. A control and pulsewidth-modulation scheme is proposed, capable of independently controlling the operating voltage of each PVA. Compared to a conventional two-level inverter system, the proposed system configuration allows one to extract maximum power, to reduce the devices voltage rating (with the subsequent benefits in device-performance characteristics), to reduce the output-voltage distortion, and to increase the system efficiency. Simulation and experimental tests have been conducted with three PVAs connected to a four-level three-phase diode-clamped converter to verify the good performance of the proposed system configuration and control strategy.     

Closed-Loop Control of a Three-Phase Neutral-Point-Clamped Inverter Using an Optimized Virtual-Vector-Based Pulsewidth Modulation

This paper presents a closed-loop control scheme for the three-level three-phase neutral-point-clamped dc-ac converter using the optimized nearest three virtual-space-vector pulsewidth modulation, which is a modulation that produces low output-voltage distortion with a significant reduction of the dc-link capacitance. A new specific loop modifying the modulating waveforms is proposed to rapidly control possible perturbations in the neutral-point voltage balance. An online estimation of the load displacement angle and load linear/nonlinear nature is introduced at no extra cost. The remaining part of the control is analogous to the control for a two-level converter with an appropriate interfacing to the selected modulation. The closed-loop control is designed for the case of a renewable-energy source connected to the ac mains, and its performance is analyzed through simulation and experiments.