Control of NO x emissions from diesel engine by selective catalytic reduction (SCR) with urea

Topics in Catalysis - Among the catalysts screened, Cu-ion exchanged ZSM5 zeolite exhibited the highest NO removal activity, particularly at low reaction temperatures below 200 °C,...     

Continuous polymerization of lactam–lactone block copolymers in a twin‐screw extruder

Continuous copolymerizations of ?‐caprolactone with ?‐caprolactam and ω‐lauryl lactam were carried out in a modular intermeshing corotating twin‐screw extruder. Sodium hydride (initiator) and N‐acetyl caprolactam (coinitiator) were used to synthesize lactam–lactone copolymers in a twin‐screw extruder. We consider the variables of feeding order and feed rate of comonomers on the reactive extrusion of lactam–lactone copolymers. It was observed that simultaneous feeding of both monomers with initiator and coinitiator in the first hopper produced a mixture of homopolymers. When we fed the lactam into the first hopper and caprolactone sequentially into the second hopper, we obtained the lactam–caprolactone block copolymers. However, when we fed caprolactone first into the first hopper and the lactam into the second hopper, the extruded product was a mixture of poly(?‐caprolactone) and lactam monomer. We synthesized high molecular weight copolymers of poly(caprolactam‐b‐caprolactone) and poly(lauryl lactam‐b‐caprolactone) with different block lengths by sequential feeding of monomers. The block length of the block copolymer could be adjusted by controlling the feed rate of each monomer during reactive extrusion. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1429–1437, 2003     

Using Numerical Analysis to Develop and Evaluate the Method of High Temperature Sous‐Vide to Soften Carrot Texture in Different‐Sized Packages

The high‐temperature sous‐vide (HTSV) method was developed to prepare carrots with a soft texture at the appropriate degree of pasteurization. The effect of heating conditions, such as temperature and time, was investigated on various package sizes. Heating temperatures of 70, 80, and 90 °C and heating times of 10 and 20 min were used to evaluate the HTSV method. A 3‐dimensional conduction model and numerical simulations were used to estimate the temperature distribution and the rate of heat transfer to samples with various geometries. Four different‐sized packages were prepared by stacking carrot sticks of identical size (9.6 × 9.6 × 90 mm) in a row. The sizes of the packages used were as follows: (1) 9.6 × 86.4 × 90, (2) 19.2 × 163.2 × 90, (3) 28.8 × 86.4 × 90, and (4) 38.4 × 86.4 × 90 mm. Although only a moderate change in color (L*, a*, and b*) was observed following HTSV cooking, there was a significant decrease in carrot hardness. The geometry of the package and the heating conditions significantly influenced the degree of pasteurization and the final texture of the carrots. Numerical simulations successfully described the effect of geometry on samples at different heating conditions.     

Fabrication and characterization of ZrO2–CaO–P2O5–Na2O–SiO2 bioactive glass ceramics

SiO₂–CaO–Na₂O–P₂O₅–ZrO₂ based bioactive glasses with different compositions of SiO₂ and yttrium stabilized ZrO₂ were prepared by the conventional melt quenching technique. The effects on the chemical–mechanical properties of bioactive glasses due to the addition of ZrO₂ by replacing SiO₂ were investigated. Microstructure and phase behavior were studied by scanning electron microscopy, energy-dispersive spectroscopy, and X-ray diffraction analysis. Compressive strength, porosity, Vickers hardness, and Young’s modulus were measured as mechanical properties. Bioactivity and cell viability were investigated by immersion in simulated body fluid and MTT assay analysis. Osteosarcoma cell proliferation on the specimen surfaces was examined by confocal laser scanning microscopy. The results showed that replacing SiO₂ with ZrO₂ helps the bioactive glass to be completely vitrified at comparatively lower sintering temperature than conventional Bioglass^®. The mechanical properties were also improved without compromising biocompatibility. Bioactive glass containing 10 wt% ZrO₂ and 35 wt% SiO₂ showed compressive strength of 399.71 MPa, Young's modulus of 22.3 GPa, Vicker’s hardness of 502.54 HV, and porosity of 26 vol%.     

The effect of BMP‐2 and VEGF loading of gelatin‐pectin‐BCP scaffolds to enhance osteoblast proliferation

A composite scaffold of gelatine (Gel)‐pectin (Pec)‐biphasic calcium phosphate (BCP) was successfully fabricated. Growth factors such as bone morphogenetic protein‐2 (BMP‐2) and vascular endothelial growth factor (VEGF) were loaded into the Gel‐Pec‐BCP hydrogel scaffolds by freeze‐drying. The surface morphology was investigated by scanning electron microscopy, and BCP dispersion in the hydrogel scaffolds was measured by energy dispersive and X‐ray diffraction spectroscopy. The results obtained from Fourier transform infrared spectroscopy and quantitative measurements showed successfully loading of BMP‐2 and VEGF into the Gel‐Pec‐BCP hydrogel scaffolds. In addition MC3T3‐E1 preosteoblasts were cultivated on the three types of scaffolds to investigate the effects of BMP‐2 and VEGF on cell viability and proliferation. The Gel‐Pec‐BCP scaffolds loaded with VEGF and BMP‐2 demonstrated more cell spreading and proliferation compared to those of the Gel‐Pec‐BCP scaffolds. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41241.     

Thermal hydraulic performance analysis of the printed circuit heat exchanger using a helium test facility and CFD simulations

The thermal-hydraulic performance of the PCHE was investigated using the KAIST helium test loop. Experiments were performed in the helium laminar region with 350 < Re < 1200. The hot/cold side inlet conditions were 25–550 °C/25–100 °C over the operating pressure of 1.5–1.9 MPa, respectively. Mass flow rates were controlled in the range of 40–100 kg/h. Pressure drop and temperature difference were measured at the inlet and outlet of the hot and cold sides. A global Fanning factor correlation and a global Nusselt number correlation were proposed using information only at the inlet and outlet of the hot and cold sides. A three-dimensional (3-D) numerical simulation was performed using FLUENT, a commercial computational fluid dynamics (CFD) code, to compare simulation results to the KAIST helium test data and to obtain the local Nusselt number in the PCHE. CFD predictions showed good agreement with experimental data. A local pitch-averaged Nusselt number correlation was proposed using local temperature, pressure, surface heat fluxes, and properties provided by CFD simulations. The system analysis code, GAMMA, was also utilized to identify which correlation was more applicable for system analysis. It turns out that the proposed local pitch-averaged Nusselt number correlation from CFD simulations is more appropriate than the global Nusselt number correlation developed from experimental data.     

Lipid production in Porphyridium cruentum grown under different culture conditions

Autotrophic growth of Porphyridium cruentum under 18:12 h and 12:12 h light:dark cycles showed the maximum cell concentration of 2.1 g-dry wt./L, whereas the specific growth rate, 0.042 (1/h), at 18:6 h is faster than that of 12:12 h, 0.031 (1/h), respectively. The highest lipid accumulation level, 19.3 (%, w/w), was achieved at 12:12 h cycle. Under dark cultivation condition with 10 g/L of glucose, the lipid accumulation in the cell was 10.9 (%, w/w), whereas the heterotrophic growth with glycerol as the carbon resource showed low level of cell concentration and lipid production, compared to that of glucose. The glucose was decided to be a suitable carbon resource for the heterotrophic growth of P. cruentum. The lipids from P. cruentum seemed be feasible for biodiesel production, because over 30% of the lipid was C₁₆–C_18:1. The cultivation time and temperature were important factors to increase the maximum cell concentration. Extending the cultivation time helps maintain the maximum cell concentration, and higher lipid accumulation was achieved at 25 °C, compared to 35 °C. The fed-batch cultures showed that, under the light condition, the specific production rate was slightly decreased to 0.4% lipid/g-dry wt./day at the later stage, whereas, under the dark condition, the specific production rate was maintained to be a maximum value of 1.1% lipid/g-dry wt./day, even in the later stage of cultivation. The results indicate that the heterotrophic or 12:12 h cyclic mixotrophic growth of P. cruentum could be used for the production of biodiesel in long-term fed-batch cultivation of P. cruentum.     

Thermal fluorination effects on carbon nanotubes for preparation of a high-performance gas sensor

A high-performance NO gas sensor was prepared by inducing thermal fluorination of carbon nanotube semiconductors. Thermal fluorination of multi-walled carbon nanotubes (MWCNTs) was carried out at various temperatures (100 ∼ 1000 °C) to investigate the effects of the reaction temperature. The mechanism of high-performance NO gas sensor electrode was shown to depend on the fluorination temperature in a way that can be divided into three regions, separated at 400 and 1000 °C. In the first temperature region, the induction of fluorine functional groups onto MWCNTs showed the opposite trend in electrical resistance change comparing with traditional p-type MWCNTs. In the second temperature region, the induced fluorine functional groups were attenuated by generated fluorinated carbon gases resulting in the decomposition of MWCNTs and the recovery of traditional p-type gas sensor behavior. In the highest temperature region above 1000 °C, reoriented carbon structure was observed, showing bent nanotubes produced from destruction by fluorination and subsequent reorientation due to the high temperature. The gas sensing responsiveness was significantly improved by the thermal fluorination, which causes electrophilic attraction, creates adsorption sites for target NO gases and improve hydrophobicity for gas sensing stability in humid condition. In conclusion, a high-performance gas sensor was obtained by thermal-fluorination of MWCNTs.