An Analysis of Scheduling Policies In Multiechelon Production Systems

Results of a simulation study of the economics of frequency of rescheduling Material Requirements Planning (MRP) systems are presented for a single-product, two-stage system in which demand is uncertain. The results indicate that for systems with moderate demand uncertainty, frequent rescheduling to maintain customer service may be uneconomical when compared with the alternative of more stable schedules in conjunction with safety stock. This result arises primarily because the cost of “emergency” production setups which occur when rescheduling is frequent exceeds the cost of safety stock required to “protect” stable schedules.     

HEURISTIC APPROACHES FOR LOADING PROBLEMS IN FLEXIBLE MANUFACTURING SYSTEMS

Flexible manufacturing systems (FMSs) are able to process a wide variety of operations, but the specific mix of operations that can be performed at any point in time depends upon the combination of tools loaded onto the machines. The machines have tool magazines with finite capacities. We consider the problem of assigning operations and their associated tools to machines (or groups of machines) to maximize the throughput for a specified steady-state mix of orders. Since this objective is difficult to deal with directly, we use an intermediate objective of meeting workload targets for each machine group as closely as possible. A certain form of this intermediate objective has been shown to correlate highly with the original objective.

Since it is computationally intractable to find optimal solutions for problems with more than 20 operations, fast heuristic algorithms are developed. These algorithms are adapted from multi-dimensional bin-packing algorithms. Computational results are reported.     

Planned Leadtimes For Serial Production Systems

We investigate the problem of setting planned leadtimes in serial production systems when the actual leadtimes are stochastic. The objective is to minimize the sum of inventory holding costs, rescheduling costs arising from tardiness at intermediate stages of production, and tardiness of delivery to the customer.

A single-pass algorithm is developed which finds optimal solutions. The analytical models underlying the algorithm and extensive computational experience indicate that it is never optimal to have planned leadtimes of zero when there are rescheduling costs at intermediate stages of production. This also implies that unconditional immediate dispatching is not optimal under these conditions.     

Are Diamonds a MEMS' Best Friend?

Next-generation military and civilian communication systems will require technologies capable of handling data/ audio, and video simultaneously while supporting multiple RF systems operating in several different frequency bands from the MHz to the GHz range [1]. RF microelectromechani-cal/nanoelectromechanical (MEMS/NEMS) devices, such as resonators and switches, are attractive to industry as they offer a means by which performance can be greatly improved for wireless applications while at the same time potentially reducing overall size and weight as well as manufacturing costs.     

Streamflow alteration and habitat ramifications for a threatened fish species in the Central United States

In the Central United States, the Arkansas darter (Etheostoma cragini) is listed as a threatened fish species by the State of Kansas. Survival of the darter is threatened by loss of habitat caused by changing streamflow conditions, in particular flow depletion. Future management of darter populations and habitats requires an understanding of streamflow conditions and how those conditions may have changed over time in response to natural and anthropogenic factors. In Kansas, streamflow alteration was assessed at 9 U.S. Geological Survey streamgages in 6 priority basins with no pronounced long‐term trends in precipitation. The assessment was based on a comparison of observed (O) and predicted expected (E) reference conditions for 29 flow metrics. The O/E results indicated a likely or possible diminished flow condition in 2 basins; the primary cause of which is groundwater‐level declines resulting from groundwater pumping for irrigated agriculture. In these 2 basins, habitat characteristics adversely affected by flow depletion may include stream connectivity, pools, and water temperature. The other 4 basins were minimally affected, or unaffected, by flow depletion and therefore may provide the best opportunity for preservation of darter habitat. Through the O/E analysis, anthropogenic streamflow alteration was quantified and the results will enable better‐informed decisions pertaining to the future management of darters in Kansas.     

Sustainable end-of-life vehicle recycling: R&;D collaboration between industry and the U.S. DOE

Approximately 15 million cars and trucks reach the end of their useful life in the United States each year. More than 75% of the materials from end-of-life vehicles are profitably recovered and recycled by the private sector; automotive materials recycling is a success story. To achieve greater fuel efficiency and safety, today’s cars incorporate an increasing share of innovative light-weight materials. While these materials greatly enhance efficiency during vehicle use, they can present special challenges for recycling. These challenges will persist as automotive designs and the mix of materials used in vehicles continue evolving to further improve safety and performance. To meet the challenges of automotive materials recycling, the U.S. Department of Energy has recently expanded its collaborative research with industry in this area. This article discusses this collaborative government/industry approach to sustainable end-of-life vehicle recycling. For more information, contact Edward J. Daniels, Argonne National Laboratory, 9700 S. Cass Avenue, Building 362, Room C393, Argonne, IL 60439-4815; (630) 252-5279; fax (630) 252-1342; e-mail edaniels@anl.gov.     

External review for promotion and tenure in schools of nursing

A literature review conducted for a 1989 article on assessing the quality of life in surgical studies revealed that quality of life was more often mentioned than measured. Few authors reported the use of known, standardized scales. The objective of this study was to determine if and to what extent this situation has changed. A MEDLINE search of surgical studies published between 1989 and 1995 produced over 277 abstracts of surgical studies containing the words "quality of life." The abstracts were studied in three time periods: 1989-1990, 1991-1992 and 1993-1995. Findings indicated that the use of the term "quality of life" increased markedly over the study period, and studies using standardized measures escalated from 27.4% in 1989-1990 to 48.3% in 1993-1995. Those abstracts not stating how quality of life was assessed decreased from 48.4% in the early period to 21.7% in the last period. Of the abstracts reporting studies that used quality of life measures, 33% came from cancer studies, 21.7% from cardiovascular or respiratory studies, 14.8% from gastroenterology studies, 13.4% from nephrology studies and 6.1% from orthopedic studies. Surgical investigators selected a variety of global measures of quality of life as well as disease-specific instruments. The abstracts also revealed that surgeons are using quality-of-life assessment to monitor patients over time, to help select patients for surgery, to determine the effect of surgical treatment and for making policy decisions. Notwithstanding the limitations of this project, there is evidence in the literature that surgeons are increasingly willing to assess the impact of the surgical interventions by quality-of-life measures and are becoming more familiar with the diverse measures used to assess quality of life.     

Definition of the Linear Region of X-Ray -Induced Cable Response

Cable response to X-rays is linear with incident fluence, provided the deposited charge in cable dielectrics is directly proportional to the X-ray flux. To estimate the level at which the linear region ends, we discuss three nonlinear processes that modify the deposited charge profile in a hypothetical cable model: field-limiting in vacuum gaps, ionization effects in air-filled gaps, and radiation-induced dielectric conductivity. The exact level at which limiting of the Norton driver in an elemental length of cable begins depends on the cable geometry and the X-ray source. Estimates of the onset of nonlinearities caused by field-limiting and by dielectric conductivity are found in terms of cable and source parameters. With air-filled gaps, the Norton driver is always nonlinear. In addition to limiting of the Norton drivers, the load response of a long cable may be limited because propagating currents are attenuated by the induced conductivity of the bulk of the dielectric.     

Designing against a class of algebraic attacks on symmetric block ciphers

Recently, Courtois and Pieprzyk proposed a class of algebraic attacks on symmetric block ciphers that takes advantage of a previously-unexploited property of substitution boxes, or s-boxes, in the round function. This paper gives a brief overview of this ``overdefined system of equations' (OSE) attack and shows how the attack may be avoided through the use of round functions constructed according to the CAST design procedure. Such round functions contain a variety of protection mechanisms, including s-boxes of large dimension, a circular key-dependent rotation step, and combinations of operators from different algebraic groups.