Mechanical spectroscopy in commercial Fe–6 wt.% Si alloys between 400 and 1000 K

Mechanical spectroscopy, neutron diffraction and differential scanning calorimetry (DSC) were performed on commercial Fe–6 wt.% Si alloy after quenching from high temperature. The damping spectrum shows a peak at around 800 K and an associated modulus defect. The modulus shows an increase during the second and subsequent heating runs. In addition, an anomaly in the modulus behavior has been found at around 400 K. Different thermal treatments allows to obtain two different recovery degrees of the quenched-in defects. The influence of the recovery degree on the 800 K internal friction peak and on the anelastic modulus has been evaluated and confirm the validity of the grain boundary mechanism associated to this peak. Experimental results are discussed on the basis of recovery and ordering processes.     

Polyimide foams from powder: Experimental analysis of competitive diffusion phenomena

In the present study, various diffusive processes have been investigated during foaming of powdered precursors of polyimide. A detailed analysis of the powdered precursor's characteristics allows for an enhanced morphological understanding of the resulting microstructures and foam unit cell. Parameters that are central to the foaming process such as particle morphology, volatile concentration and sorption-desorption processes are evaluated. Isothermal and non-isothermal desorption experiments have been carried out by thermogravimetric analysis (TGA), and specific diffusive processes have been correlated to thermodynamic and kinetic transitions by means of modulated differential scanning calorimetry (MDSC) of the corresponding materials. It was found that two primary fluxes of volatiles, one out of the external surface of the particles (responsible for volatile desorption) and the other into the growing bubble (responsible for vapor supersaturation inside the bubble) compete against each other creating a competitive scenario that becomes the controlling factor for potential inflation within the precursor particles.     

Variation in Malting Quality and Heat Resistance in the Malting Barley Variety “Alexis”

In earlier studies concerning vigour, where subsamples are heat‐treated before germination there was found heat‐sensitive as well as heat‐resistant barley samples. The vigour model developed by Ellis and Roberts and further developed at Carlsberg, could only describe the heat‐sensitive barleys. Seventeen samples of the “Alexis” variety grown widely in Europe were collected from the EBC trials in 1994 in order to see if heat resistance in barley was influenced by different growing conditions. We found both heat‐sensitive samples following the vigour model as well as pronounced heat‐resistant samples, but these were not divided according to growing conditions. The germination curves dependent on heat treatment and germination time were evaluated by Principal Component Analysis (PCA). Heat‐resistant barley samples could be differentiated from heat‐sensitive samples already after ½ h of heat treatment at 68°C (12% moisture) and after 3 days of germination. The barley samples were analysed with regard to malting quality. The PCA evaluation of the data divided the samples according to growing location, mainly due to differences in protein and β‐glucan. However, the malting analyses could not describe the differences in heat resistance and sensitivity of the barleys. The biochemical background of the heat resistance found is discussed on the basis of literature. Our findings should give an experimental basis for exploiting a biochemical principle for heat resistance, which is formed during grain filling and consumed during storage and germination.     

Influence of molybdenum on passivation of polarised stainless steels in a chloride environment

Polarised specimens of AISI 304L and 316L stainless steels (SS) were studied using X-ray photoelectron spectroscopy in conjunction with Ar⁺-ion sputtering. A 5% NaCl test solution was used at room temperature. The polarised passive films formed consist mainly of chromium oxide and hydroxide and a small proportion of iron oxides. The composition of the films depend strongly on the potential. Chloride and molybdenum ions appear when the AISI 316L SS alloy is polarised at a potential close to pitting potential.     

Markovian-based traffic modeling for mobile ad hoc networks

Mobile ad hoc networks (MANETs) show very significant difference with respect to other computer networks due to the presence of extremely large packet loss bursts. The development of protocols for mobile ad hoc networks, especially multimedia protocols, require extensive evaluation either through simulation or real-life tests. Such testing consumes a great amount of resources both in terms of time and trace file sizes. Therefore, finding efficient means of reducing the amount of data that is stored and processed is quite important to accelerate the evaluation of different audio/video streaming applications. If, moreover, we are able to model the loss pattern experienced, we can further accelerate the evaluation process.In this work we propose two models based on hidden Markov chains that are able to grasp both packet arrivals and packet loss patterns in MANETs. A simpler two-state model is proposed to model losses when proactive routing protocols are used, while a more complex three-state model is proposed for reactive routing protocols. We also introduce a new set for packet loss pattern measurements that can be of interest for the evaluation of audio/video streaming applications.Experimental results show that the proposed models can adequately reproduce extremely long packet loss patterns, typical of MANET environments, with a high degree of accuracy. Overall, we find that the proposed models are able to significantly reduce both the simulation time and the trace file sizes required.     

An overview of vertical handover techniques: Algorithms, protocols and tools

Wireless technologies, under the “Anywhere, Anytime” paradigm, offer users the promise of being always attached to the network. Mobile devices enabled with multiple wireless technologies make possible to maintain seamless connectivity in highly dynamic scenarios such as vehicular networks (VNs), switching from one wireless network to another by using vertical handover techniques (VHO). In this paper we present an overview of VHO techniques, along with the main algorithms, protocols and tools proposed in the literature. In addition we suggest the most appropriate VHO techniques to efficiently communicate in VN environments considering the particular characteristics of this type of networks.     

Pigment and colour stability of frozen kiwi-fruit slices during prolonged storage

Changes in major pigment constituents of frozen kiwi-fruit slices during prolonged storage at –18° C and correlation with colour measurements (Hunter Lab parameters) were studied. Kiwi-fruit cultivars (Hayward, Bruno, Monty and Abbot) were processed without previous treatment and vacuum packed after freezing. HPLC using a diode array detector was used to individually quantify and identify the three major pigment components (xanthophylls, chlorophylls and derivatives and-carotene). The colour of fresh and frozen slices by Hunter Color values were correlated with each class of pigment compounds. An apparent first order degradation rate was found for total chlorophylls and xanthophylls. Hayward and Bruno were more suitable for prolonged freezing preservation in terms of colour deterioration.

---

Haltbarkeit von Pigment und Farbe gefrorener Kiwifrucht-Scheiben während langer Lagerung

Zusammenfassung Es wurden die Veränderungen der meisten Pigmentbestandteile gefrorener Kiwifrucht-Scheiben während langer Lagerzeit bei –18°C und die Korrelation mit Farbmessungen studiert. Kiwifrüchte der Sorten Hayward, Bruno, Monty und Abbot wurden ohne vorherige Behandlung unter Vakuum direkt nach dem Gefrierprozeß verpackt. Mit HPLC wurde quantitativ gemessen und die drei Pigmentbestandteile Xanthophyll, Chlorophyll und-Carotin identifiziert. Die Farbe der frischen, gefrorenen Scheiben (Hunter-Farb-Werte) korrelierte mit jedem der Pigmentbestandteile. Ein Verlust, scheinbar erster Ordnung, wurde für Chlorophyll und Xantophyll bei den Sorten Hayward und Bruno beobachtet, jedoch sind sie für das Gefrieren bei langer Lagerzeit trotz Farbverlust geeignet.

     

Establishing In-House Cutoffs of CSF Alzheimer’s Disease Biomarkers for the AT(N) Stratification of the Alzheimer Center Barcelona Cohort

Background: Clinical diagnosis of Alzheimer’s disease (AD) increasingly incorporates CSF biomarkers. However, due to the intrinsic variability of the immunodetection techniques used to measure these biomarkers, establishing in-house cutoffs defining the positivity/negativity of CSF biomarkers is recommended. However, the cutoffs currently published are usually reported by using cross-sectional datasets, not providing evidence about its intrinsic prognostic value when applied to real-world memory clinic cases. Methods: We quantified CSF Aβ1-42, Aβ1-40, t-Tau, and p181Tau with standard INNOTEST^® ELISA and Lumipulse G^® chemiluminescence enzyme immunoassay (CLEIA) performed on the automated Lumipulse G600II. Determination of cutoffs included patients clinically diagnosed with probable Alzheimer’s disease (AD, n = 37) and subjective cognitive decline subjects (SCD, n = 45), cognitively stable for 3 years and with no evidence of brain amyloidosis in 18F-Florbetaben-labeled positron emission tomography (FBB-PET). To compare both methods, a subset of samples for Aβ1-42 (n = 519), t-Tau (n = 399), p181Tau (n = 77), and Aβ1-40 (n = 44) was analyzed. Kappa agreement of single biomarkers and Aβ1-42/Aβ1-40 was evaluated in an independent group of mild cognitive impairment (MCI) and dementia patients (n = 68). Next, established cutoffs were applied to a large real-world cohort of MCI subjects with follow-up data available (n = 647). Results: Cutoff values of Aβ1-42 and t-Tau were higher for CLEIA than for ELISA and similar for p181Tau. Spearman coefficients ranged between 0.81 for Aβ1-40 and 0.96 for p181TAU. Passing–Bablok analysis showed a systematic and proportional difference for all biomarkers but only systematic for Aβ1-40. Bland–Altman analysis showed an average difference between methods in favor of CLEIA. Kappa agreement for single biomarkers was good but lower for the Aβ1-42/Aβ1-40 ratio. Using the calculated cutoffs, we were able to stratify MCI subjects into four AT(N) categories. Kaplan–Meier analyses of AT(N) categories demonstrated gradual and differential dementia conversion rates (p = 9.815⁻²⁷). Multivariate Cox proportional hazard models corroborated these findings, demonstrating that the proposed AT(N) classifier has prognostic value. AT(N) categories are only modestly influenced by other known factors associated with disease progression. Conclusions: We established CLEIA and ELISA internal cutoffs to discriminate AD patients from amyloid-negative SCD individuals. The results obtained by both methods are not interchangeable but show good agreement. CLEIA is a good and faster alternative to manual ELISA for providing AT(N) classification of our patients. AT(N) categories have an impact on disease progression. AT(N) classifiers increase the certainty of the MCI prognosis, which can be instrumental in managing real-world MCI subjects.     

The effect of ultra-thin graphite on the morphology and physical properties of thermoplastic polyurethane elastomer composites

Composites of thermoplastic polyurethane (TPU) and ultra-thin graphite (UTG) with concentrations ranging from 0.5 wt.% to 3 wt.% were prepared using a solution compounding strategy. Substantial reinforcing effects with increased loadings are achieved. Compared to neat TPU, values for storage modulus and shear viscosity are enhanced by 300% and 150%, respectively, for UTG concentrations of 3 wt.%. Additionally, an enhancement of thermal properties is accomplished. The crystallization temperature and thermal stability increased by 30 °C and 10 °C, respectively, compared to neat TPU. Furthermore, the use of oxidized UTG (UTGO) with its added functional oxygen groups suggests the presence of chemical interactions between UTG and TPU, which additionally impact on the thermal properties of the corresponding composites. Controlling the oxidation degree, thus offers further possibilities to obtain composites with tailored properties. The presented approach is straightforward, leads to homogeneous TPU-UTG composites with improved materials properties and is especially suitable for commercial UTG materials and further up-scaled production.     

The Sterol and Erythrodiol + Uvaol Content of Virgin Olive Oils Produced in Five Olive-Growing Zones of Extremadura (Spain)

The content of sterols and erythrodiol + uvaol was studied in 273 virgin olive oil samples from 40 mills in five olive‐growing zones of Extremadura (Spain). An analysis of variance showed significant differences at a confidence level of 95 % between the different zones in each of the main sterols and in the sum of erythrodiol + uvaol. The results of a linear discriminant analysis, considering the different olive‐growing areas as categorical dependent variables and the different sterols as independent variables, explained 78.2 % of the variance with the first two discriminant functions. The resulting model correctly classified 86.9 % of the samples analysed. A validation study was conducted to verify the goodness of the discriminant analysis, resulting in 79.3 % of the new samples used for validation being correctly classified. In the graphical representation of the different groups studied considering the proposed model's first two discriminant functions, the centroids of the Sierra Norte de Cáceres, Vegas del Guadiana and Tierra de Barros olive‐growing zones were clearly separated, but this was not the case for the other two zones—La Serena and La Siberia.