The effect of sodium sulfate on solidification/stabilization of a synthetic electroplating sludge in cementitious binders

The effect of sodium sulfate on the solidification/stabilization of a large quantity of a synthetic electroplating sludge in cementitious binders was s     

Performance implications of the thermal-induced frequency drift infast wavelength switched systems with heterodyne detection

The frequency modulation response and tuning dynamics of a two-section DFB laser are determined by carrier and thermal modulation of the active layer refractive index. In response to a step change in the injection current for switching between channels in a wavelength division multiplexed system, the optical frequency changes rapidly due to the carrier effect, and then slowly drifts toward a steady state value due to the thermal effect. For wavelength switched applications with heterodyne detection, the drifting of the optical frequency broadens the spectrum of the IF signal and may impose a limit on the time that the signal remains within the IF passband (residency time). The IF spectral broadening and residency time are investigated theoretically and experimentally. Based upon a minimum mean square error fit between experimental and theoretical FM responses, the dependence of the spectral broadening and residency time on the bias condition of the laser and the optical frequency switching interval is characterized     

Adsorption Characteristics of Oxide Coated Buoyant Media (ρs<1.0) for Storm Water Treatment. II: Equilibria and Kinetic Models

Divalent metal species adsorption onto a manganese oxide coated polymeric medium (MOPM) was evaluated through batch adsorption experiments using a flow-through batch reactor. In this paper, Part II, the batch equilibrium and kinetic data examined in Part I are modeled using a triple layer surface complexation model and a potential driving second order kinetic model. Surface complexation modeling using FITEQL-TLM generated intrinsic surface acidity constants for the MOPM of log?K?a1int = 3.196 and log?K?a2int = ?5.802. The intrinsic surface reaction constants for Pb(II), Cu(II), and Zn(II) were log?K?Pbint = ?1.91, log?K?Cuint = ?2.53, and log?K?Znint = ?4.45, respectively. A potential driving second order kinetic model was developed to predict sorption of the divalent metal ions onto the MOPM. The general adsorption kinetics for MOPM can be described as a fast reaction occurring within 30 min and a slower reaction continuing from 5 to 15 h. Kinetic results can be interpreted using assumptions of the potential driving second order model that the dominant control forces are the chemical potential of the MOPM activated surface sites and chemical potential of sorbate in the solution.     

A Gram-Charlier series method of calculating the probability of error in lightwave transmission systems

A Gram-Charlier series method has previously been applied to the calculation of the conditional probability of error, for a fixed data sequence, in the presence of intersymbol interference, detector multiplication noise, shot noise, and thermal noise. The probability of error is obtained by averaging the conditional probability of error over all possible data sequences. In this paper it is shown how the computational efficiency of the Gram-Charlier series method can be improved by calculating the probability of error without the need for an exhaustive averaging procedure.     

10 Gbit/s all-optical clock recovery using three-section DFB laser with optical feedback

All-optical clock recovery using a three-section self-pulsating DFB laser with optical feedback is demonstrated. The feedback of a wavelength-converted clock signal reduces the dependence on the input data signal power, decreases the jitter by up to 2.7 ps, and increases the extinction ratio by 6.5 dB.     

Characterization of the chirp and intensity modulation propertiesof an SOA-MZI wavelength converter

Wavelength converters based on cross-phase modulation in semiconductor optical amplifiers (SOAs) in the arms of a Mach-Zehnder interferometer (MZI) provide a key network element for reconfigurable optical networks that incorporate wavelength routing. For system design purposes, the properties of the intensity and phase (chirp) modulation of the wavelength-converted signal for an SOA-MZI wavelength converter are important. In this paper, the small-signal α parameter, which characterizes the converter chirp, and the conversion frequency response are characterized experimentally for an integrated all-active SOA-MZI wavelength converter. For both co- and counterpropagating signals, the variation of the a parameter along the interference and conversion curves is considered in detail. Three optical modulators with quite different chirp properties are used to generate the modulated input signal to the wavelength converter. The results demonstrate that the chirp of the wavelength-converted signal is primarily determined by the device properties and the intensity of the modulated input signal. The a parameter of the wavelength-converted signal is negative for noninverting operation and positive for inverting operation. An important contribution of the paper is the detailed assessment of this key device characteristic. The experimental characterization of the wavelength converter is incorporated into a device model that can be used to obtain the pulse response. Calculated and measured results for the time dependence of the intensity and chirp of the wavelength-converted signal are in good agreement. The conversion frequency response for the intensity modulation is also measured along the conversion curve. The 3-dB bandwidth is found to be generally about 8-10 GHz     

Effect of the nonlinear gain in semiconductor lasers on theperformance of multigigabit-per-second lightwave systems

The implications on performance of the functional form of the nonlinear gain in single-mode semiconductor lasers are studied for multigigabit-per-second, intensity-modulation, direct-detection lightwave systems. Compared to a previously used functional dependence on the photon and carrier densities, a new result due to G. Agrawal (1988) can, depending on the fiber dispersion and gain compression factor, yield quite different receiver sensitivities     

Modulation characteristics of semiconductor Mach-Zehnder opticalmodulators

The transmission and chirp characteristics are described for two types of semiconductor Mach-Zehnder modulators, distinguished by the differential phase shift between the two arms of the interferometer in the unbiased state. The conventional modulator has a differential phase shift of 0 radians, while the π-shift modulator has a differential phase shift of π radians. The nonlinear dependence on the applied voltage of the attenuation and phase constants of the optical signal propagating in the p-i-n waveguide leads to different characteristics for the two modulators. The influence of the splitting ratio of the Y-junctions is considered for single-arm and dual-arm (push-pull) modulation formats. The π-shift modulator is shown to yield better transmission performance for 10 Gb/s systems compared to the conventional modulator     

Performance implications of time delay and responsivity mismatchfor balanced CPFSK lightwave receivers

The performance implications of time delay mismatch and photodiode responsivity mismatch are assessed for balanced CPFSK heterodyne receivers with differential detection. The receiver sensitivity is determined using a technique which combines computer simulation for characterizing the signal at the receiver output with a formula-based method of evaluating the bit error ratio. This approach permits consideration of laser phase noise, local oscillator intensity noise, nonlinear signal processing, and nonideal components. The numerical results quantify the penalty in receiver sensitivity due to mismatch, for different levels of local oscillator intensity noise. It is determined that time delay mismatch primarily affects the intensity noise contribution to the IF signal, while responsivity mismatch primarily affects the received signal component of the IF signal     

Performance of smart lightwave receivers with linear equalization

Signal processing techniques can be used to reduce linear and nonlinear distortion in high-speed lightwave systems caused by fiber dispersion and nonideal responses of optoelectronic and electronic components. The improvement in the performance of 2.5 and 10 Gb/s intensity modulation, direct detection systems is assessed for receivers which utilize an analog taped delay line equalizer to compensate for signal distortion. Synchronous and fractionally spaced equalizers are evaluated. Smart receivers that jointly optimize the decision time, decision threshold, and equalizer tap weights under a minimum bit error ration criterion are considered. This yields the optimum system performance and allows consideration of both reduced distortion and enhanced noise arising from the signal processing. The effectiveness of the equalization is determined as a function of several important system parameters. Three-tap and five-tap synchronous equalizers yield virtually the same improvement in receiver sensitivity. Depending on the system, a five-tap fractionally spaced equalizer with half-bit-period tap spacing may or may not be significantly more effective than a three-tap synchronous equalizer