Experimental investigation of Co and Fe-Doped CuO nanostructured electrode material for remarkable electrochemical performance

The current research work presents a facile and cost–effective co-precipitation method to prepare doped (Co & Fe) CuO and undoped CuO nanostructures without usage of any type of surfactant or capping agents. The structural analysis reveals monoclinic crystal structure of synthesized pure CuO and doped-CuO nanostructures. The effect of different morphologies on the performance of supercapacitors has been found in CV (cyclic voltammetry) and GCD (galvanic charge discharge) investigations. The specific capacitances have been obtained 156 (±5) Fg^?1, 168(±5) Fg^?1 and 186 (±5) Fg^?1 for CuO, Co-doped CuO and Fe-doped CuO electrodes, respectively at scan rate of 5 mVs^?1, while it is found to be 114 (±5) Fg^?1, 136 (±5) Fg^?1 and 170 (±5) Fg^?1 for CuO, Co–CuO and Fe–CuO, respectively at 0.5 Ag^-1 as calculated from the GCD. The super capacitive performance of the Fe–CuO nanorods is mainly attributed to the synergism that evolves between CuO and Fe metal ion. The Fe-doped CuO with its nanorods like morphology provides superior specific capacitance value and excellent cyclic stability among all studied nanostructured electrodes. Consequently, it motivates to the use of Fe-doped CuO nanostructures as electrode material in the next generation energy storage devices.     

Estimating confidence intervals for cost-effectiveness ratios: an example from a randomized trial

Cost-effectiveness ratios usually appear as point estimates without confidence intervals, since the numerator and denominator are both stochastic and one cannot estimate the variance of the estimator exactly. The recent literature, however, stresses the importance of presenting confidence intervals for cost-effectiveness ratios in the analysis of health care programmes. This paper compares the use of several methods to obtain confidence intervals for the cost-effectiveness of a randomized intervention to increase the use of Medicaid's Early and Periodic Screening, Diagnosis and Treatment (EPSDT) programme. Comparisons of the intervals show that methods that account for skewness in the distribution of the ratio estimator may be substantially preferable in practice to methods that assume the cost-effectiveness ratio estimator is normally distributed. We show that non-parametric bootstrap methods that are mathematically less complex but computationally more rigorous result in confidence intervals that are similar to the intervals from a parametric method that adjusts for skewness in the distribution of the ratio. The analyses also show that the modest sample sizes needed to detect statistically significant effects in a randomized trial may result in confidence intervals for estimates of cost-effectiveness that are much wider than the boundaries obtained from deterministic sensitivity analyses.     

A generalized scheme for mapping parallel algorithms

A generalized mapping strategy that uses a combination of graph theory, mathematical programming, and heuristics is proposed. The authors use the knowledge from the given algorithm and the architecture to guide the mapping. The approach begins with a graphical representation of the parallel algorithm (problem graph) and the parallel computer (host graph). Using these representations, the authors generate a new graphical representation (extended host graph) on which the problem graph is mapped. An accurate characterization of the communication overhead is used in the objective functions to evaluate the optimality of the mapping. An efficient mapping scheme is developed which uses two levels of optimization procedures. The objective functions include minimizing the communication overhead and minimizing the total execution time which includes both computation and communication times. The mapping scheme is tested by simulation and further confirmed by mapping a real world application onto actual distributed environments     

Assessment of sperm count in rural population of central India

26 clinician trainees' recollections of experiences in a diagnostic preschool program were analyzed in terms of strength and weaknesses of the program.     

Automated bank cheque verification using image processing and deep learning methods

Multimedia Tools and Applications - Automated bank cheque verification using image processing is an attempt to complement the present cheque truncation system, as well as to provide an alternate...     

Replication-Based Fault Tolerance for MPI Applications

As computational clusters increase in size, their mean time to failure reduces drastically. Typically, checkpointing is used to minimize the loss of computation. Most checkpointing techniques, however, require central storage for storing checkpoints. This results in a bottleneck and severely limits the scalability of checkpointing, while also proving to be too expensive for dedicated checkpointing networks and storage systems. We propose a scalable replication-based MPI checkpointing facility. Our reference implementation is based on LAM/MPI; however, it is directly applicable to any MPI implementation. We extend the existing state of fault-tolerant MPI with asynchronous replication, eliminating the need for central or network storage. We evaluate centralized storage, a Sun-X4500-based solution, an EMC storage area network (SAN), and the Ibrix commercial parallel file system and show that they are not scalable, particularly after 64 CPUs. We demonstrate the low overhead of our checkpointing and replication scheme with the NAS Parallel Benchmarks and the High-Performance LINPACK benchmark with tests up to 256 nodes while demonstrating that checkpointing and replication can be achieved with a much lower overhead than that provided by current techniques. Finally, we show that the monetary cost of our solution is as low as 25 percent of that of a typical SAN/parallel-file-system-equipped storage system.     

Low‐temperature synthesis of hierarchical structures of copper oxide and their superior biological activity

In this work, the authors report a facile low‐temperature wet‐chemical route to prepare morphology‐tailored hierarchical structures (HS) of copper oxide. The preparation of copper oxide collides was carried out using varying concentrations of copper acetate and a reducing agent at a constant temperature of 50°C. The prepared HS of CuO were characterised by powdered X‐rays diffraction that indicates phase pure having monoclinic structures. The morphology was further confirmed by field‐emission scanning electron microscope. It reveals a difference in shape and size of copper oxide HS by changing the concentration of reactants. In order to evaluate the effect of H₂ O₂ on CuO NPs, the prepared CuO are modified by treatment with H₂ O₂. In general trend, CuOH₂ O₂ collide showed enhanced protein kinase inhibition, antibacterial (maximum zone 16.34 mm against Staphylococcus aureus) and antifungal activities in comparison to unmodified CuO collides. These results reveal that CuO HS exhibit antimicrobial properties and can be used as a potential candidate in pharmaceutical industries.Inspec keywords: molecular biophysics, antibacterial activity, X‐ray diffraction, microorganisms, copper compounds, nanofabrication, nanoparticles, narrow band gap semiconductors, field emission scanning electron microscopy, enzymes, nanomedicine, particle size, semiconductor growthOther keywords: unmodified CuO collides, low‐temperature synthesis, morphology‐tailored hierarchical structures, copper acetate, reducing agent, monoclinic structures, copper oxide HS, CuO NPs, Staphylococcus aureus, biological activity, copper oxide, powdered X‐ray diffraction, field‐emission scanning electron microscopy, facile low‐temperature wet‐chemical method, protein kinase inhibition, antibacterial activity, antifungal activity, antimicrobial properties, pharmaceutical industries, temperature 50.0 degC, CuO     

Molded electrode test system for evaluating wet electrical performance of flexible poly(vinyl chloride)

The molded electrode test system (METS) test has long been used with flexible poly(vinyl chloride) (PVC) electrical insulation. However, there are many questions regarding its precision and accuracy, as there is no industry‐accepted standard regarding this test. This paper aims to answer some of these questions in terms of the measurement precision as well as the ability of the test to predict wet electrical performance on wire. A repeatability study was conducted on flexible PVC compound where 10 samples were produced and tested under identical conditions. The mean insulation resistance was (550 MΩ)/(305 m) with a standard deviation of (120 MΩ)/(305 m). As the thickness of the insulation increased, the insulation resistance decreased. Furthermore, the study showed that there was no correlation between the METS test and wet volume resistivity, while there was some correlation with wet insulation resistance (IR) at high temperature, though the ability to predict wet IR from the METS test was limited. J. VINYL ADDIT. TECHNOL., 18:178–183, 2012. © 2012 Society of Plastics Engineers